Lee's Stainless Steel 15° Swivel Base Recessed Fishing Rod Holder - Medium - 2" OD X 6.5" Tube for Small Bent Tips Hunting & Fishing

Swivel Base Rod Holders

RH5169

15° Half Angle Short Tube

Medium Size Short Swivel Base for Standing Canes with Tips curved. Has a 2" OD x 6-1/2" long tube.

Without a doubt, our Swivel Base Rod Holder is the ultimate rod holder for the serious sportsman. Primarily designed for use with bent tip tackle, the rod holder's unique swivel base allows the rod butt to rotate in the rod holder when sideways pressure is applied to the rod tip. This is an indispensable tool, especially important in fishing for giant bluefin tuna, where reel brakes of around 60 pounds are frequently used and can result in enormous forces being applied to the backing pin. cane.

Not only does this make sheared rod holder pins a thing of the past, but, more importantly, it allows the tip of therod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line flows sideways off the roller tip rather than onto the roller. The rod is also easier to remove from the support since it is not locked to a rigid axle. The swivel base holder functions like a standard rod holder when used with straight rods. The straight rods can be turned manually so that the line stays on the tip roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon lock washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.

With 2" OD x 6-1/2" long tube. Without a doubt, our rotating base rod holder is the ultimate rod holder for serious athletes. Primarily designed for bending ends...
PRODUCT ID: 31170
SKU : NVN-31170
CSKU: CWR-31170
REWRITE: 42281-lee-s-150-stainless-steel-swivel- base-flush
MPN: RH5169H
UPC: 096811516533
ASIN : B00K4WHRKA
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Lee Stainless Steel Swivel Base Flush Mount Rod Holder 15° from - Medium - 2" OD : Lee's Stainless Steel 15° Swivel Base Recessed Fishing Rod Holder - Medium - 2" OD X 6.5" Tube for Small Bent Butts
TYPE: Hunting & Fishing | Rod holders
SELLER: Lee's Tackle
SPORTING GOODS> OUTDOOR LEISURE> FISHING
Sports
Lee's 15176; Stainless Steel Swivel Base Recessed Fishing Rod Holder - Medium Length
Gtags:

GSpecs:

Lee's Stainless Steel 15° Swivel Base Flush Mount Rod Holder - Medium - 2" OD
RH5169
<15° Half Angle Short Tube

Short medium swivel base for standing canes with curved tips. Has a 2" OD x 6-1/2" long tube.

Without a doubt, our Swivel Base Rod Holder is the ultimate rod holder for the serious sportsman. Primarily designed for use with bent tip tackle, the rod holder's unique swivel base allows the rod butt to rotate in the rod holder when sideways pressure is applied to the rod tip. This is an indispensable tool, especially important in fishing for giant bluefin tuna, where reel brakes of around 60 pounds are frequently used and can result in enormous forces being applied to the backing pin. cane.

Not only does this make sheared rod holder pins a thing of the past, but, more importantly, it allows the rod tip to follow the fish. This reduces the possibility of line fraying and improves drag as the line flows sideways off the roller tip rather than over the roller. The rod is also more easily removed from the support since it is not locked to a rigid axle. The swivel base holder functions like a standard rod holder when used with straight rods. The straight rods can be turned manually so that the line stays on the tip roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon lock washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.

With 2" OD x 6-1/2" long tube. Without a doubt, our rod holderrotating base is the ultimate rod holder for serious athletes. Primarily designed for bending the butt...

Lee's Stainless Steel 15° Swivel Base Recessed Fishing Rod Holder - Medium - 2" OD X 6.5" Tube for Small Curved Butts Related ProductsLee's Stainless Steel Backing Plate for/Medium Rod Carriers
Sika Sikaflex 291 Fast Curing Adhesive and Sealant 300ml Cartridge - White
Sika Fast Curing Adhesive and Sealant Sikaflex 291 300 ml (10.3 oz) Cartridge - Black
Sika Sikaflex 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3 oz (300 ml) Cartridge - White
Sika Sikaflex 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3 oz (300 ml) Cartridge - Black
Sika Sikaflex 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3 oz (300 ml) Cartridge - Aluminum Gray
/>Sika Sikaflex 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3 oz (300 ml) Cartridge - Colonial White
Sika Sikaflex 505UV High Performance Exterior Grade Sealant - 10.3 oz (300 ml) Cartridge - White

Frequently Asked Questions (FAQ) about Flush Mount Rod Holder Lee's Stainless Steel 15° Swivel Base - Medium - 2" OD Lee'sFlush Mount Rod Holder - Medium - 2" OD X 6.5" Tube for Small Curved Butts?
How long is the product? (Inches)
What is the construction of the product?
How to mount or what is the mounting style of Lee Stainless Steel 15° Swivel Base Flush Mount Rod Holder - Medium - 2" OD
Who is Lee's Tackle? For over 85 years, Lee's Tackle has had a reputation bestablished to manufacture equipment of the highest quality using the best marine materials. As the third generation, Lee's Tackle is proud to continue its tradition. Whether you own a 15-foot flat skiff or a 120-foot super sport fisherman, you'll find a Lee's Tackle product that meets your needs. How to describe the Lee Support 15° Stainless Steel Swivel Base Flush Mount Cane - Medium -2" OD X 6.5" Tube for Small Curved Butts? With 2" OD x 6-1/2" long tube. Without a doubt, our rotating base rod holder is the ultimate rod holder for serious athletes. Mainly designed to bend the buttocks... How long is the product? (Inch) 6-1/2" What is the construction of the product? Stainless SteelHow to mount or what is the mounting style of the Stainless Steel 15° Swivel Base Flush Mount Rod Holder Lee - Medium - 2" Tube OD X 6.5" forlittle curved ends? FlushWhat is the diameter (inches) of the product? 2"What is the angle of the product? 15 DegreeWhat is the finish of the product? Polished

Save $51 when you purchase the Fishing Rod Holder Flush Mount Lee's Stainless Steel 15° Swivel Base - Medium - 2" OD same day before 3 p.m. Lee's 15° Stainless Steel Swivel Base Recessed Rod Holder - Medium - 2" OD X 6.5" Tube for Small Curved Butts Technical Specifications

Type :	Hunting & Fishing \| Rod Holders
Seller:	Lee's Tackle
Weight:	2.4 lbs
Angle:	15 degrees
Construction:	Stainless steel
Diameter (inches):	2"
Finishedon:	Polished
Length (inches):	6-1/ 2"
Mounting style:	Flush

Lee's Stainless Steel 15° Swivel Base Recessed Fishing Rod Holder - Medium - 2" OD X 6.5" Tube f/Small Curved User Reviews ButtsSwivel Base Recessed Fishing Rod Holder Lee's 15° Stainless Steel Tube - Medium - 2" OD>

2.4 lbs

Box sizes:

4.00 (h) x 6.00 (l) x 14.00 (l)

Cubic Feet:

336.0

Returnable:

Yes

To know the detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.