Lee's Stainless Steel 30° Swivel Base Fishing Rod Holder - Medium - 2" OD X 6.5" Tube for Small Bent Tips Hunting & Fishing

RH5165

Standard 30° angle short tube

Medium sized short swivel base for standing canes with curved stocks. Has a 2" OD x 6-1/2" long tube.

Without a doubt, our Swivel Base Rod Holder is the ultimate rod holder for the serious sportsman. Primarily designed for use with bent tip tackle, the rod holder's unique swivel base allows the rod butt to rotate in the rod holder when sideways pressure is applied to the rod tip. This is an indispensable tool, especially important in fishing for giant bluefin tuna, where reel brakes of around 60 pounds are frequently used and can result in enormous forces being applied to the backing pin. cane.

Not only does this make sheared rod holder pins a thing of the past, but, more importantly, it allows the rod tip to follow the fish. Thisreduces the possibility of line fraying and enhanced drag as the line flows sideways off the roller tip rather than over the roller. The rod is also more easily removed from the support because it is not locked to a rigid axle. The swivel base holder functions like a standard rod holder when used with straight rods. The straight rods can be turned manually so that the line stays on the tip roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon lock washers with a 1/2-inch stainless steel locknut at the bottom of the rod holder.

With 2" OD x 6-1/2" long tube. There's no doubt that our rotating bottom rod holder is the ultimate rod holder for serious athletes. Primarily designed for bending ends...
PRODUCT ID: 31168
SKU: NVN-31168
CSKU: CWR-31168
REWRITE: 42279-lee-s-300-stainless-steel-swivel- base-flush
MPN: RH5165
UPC: 096811516519
ASIN: B000Z4NVL6
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Lee's 30° Stainless Steel Swivel Base Flush Mounting Rod Bracket - Medium - 2" OD X 6.5" Tube for small curved ends
EX_NAME: LEE'S 30 DEGREES SS FLUSH MOUNT SWIVEL BASE ROD HOLDER 2" 2" OD X 6.5" for Small Curved Butts
TYPE: Hunting & Fishing | Rod Holders
SELLER: Lee's Tackle
SPORTING GOODS> OUTDOOR RECREATION> FISHING
Sports
Lee's Tackle Swivel Base Flush Mount Rod Holder LeeS 30 Degree Stainless Steel Rotating Base Flush Mount Rod Holder M by Hodges Marine
Amazon Category : Sports
Gtags:

GSpecs:

Lee's Stainless Steel 30° Swivel Base Recessed Fishing Rod Holder - Medium - 2" OD X 6.5" Tube for Small Curved Butts Product Description RH5165

Short tube with standard 30° angle

Short medium-sized swivel base for Stand-Up rods with curved stocks. Has a 2" OD x 6-1/2" long tube.

Without a doubt, our Swivel Base Rod Holder is the ultimate rod holder for the serious sportsman. Primarily designed for use with bent tip tackle, the rod holder's unique swivel base allows the rod butt to rotate in the rod holder when sideways pressure is applied to the rod tip. This is an indispensable tool, especially important in fishing for giant bluefin tuna, where reel brakes of around 60 pounds are frequently used and can result in enormous forces being applied to the backing pin. cane.

Not aloneThis makes sheared rod holder pins a thing of the past, but, more importantly, it allows the rod tip to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line flows sideways off the roller tip rather than over the roller. The rod is also more easily removed from the support since it is not locked to a rigid axle. The swivel base holder functions like a standard rod holder when used with straight rods. The straight rods can be turned manually so that the line stays on the tip roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon lock washers with a 1/2-inch stainless steel locknut at the bottom of the rod holder.

With 2" OD x 6-1/2" long tube. There is no doubt that our rotating bottom rod holder ist the ultimate rod holder for serious athletes. Primarily designed for bending the butt...

Lee's Stainless Steel 30° Swivel Base Recessed Fishing Rod Holder - Medium - 2" OD X 6.5" Tube for Small Curved Butts Products RelatedLee's Stainless Steel Backing Plate for/Medium Rod Supports
Sika Sikaflex 291 Fast Curing Adhesive & Putty 10.3 oz (300 ml) Cartridge - White
Sika Sikaflex 291 Fast Curing Adhesive and Sealant 10.3 oz (300 ml) Cartridge - Black
Sika Sikaflex 221 Multi Polyurethane Putty/Adhesive - uses - 10.3 oz (300 ml) ) Cartridge - White
Sika Sikaflex 221 Multi-purpose polyurethane sealant/adhesive - 10.3 oz (300 ml) Cartridge - Black
Sika Sikaflex 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3 oz (300 ml) Cartridge - Aluminum Grey
Sika Sikaflex 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3 oz (300 ml) Cartridge - Colonial White
br />Sika Sikaflex 505UV High Performance Polyurethane Sealant/Adhesive - 10.3 oz (300 ml) Cartridge - White

Frequently Asked Questions (FAQ) about Swivel Base Recessed Fishing Rod Holder Lee's Stainless Steel 30° Tackle - Medium - 2" OD Lee's Stainless Steel - Medium - 2" OD X 6.5" Tube for Small Curved Ends?
What is the length of the product? (Inches)
What is the construction of the product?
How to mount or what is the mounting style of Lee's 30° Stainless Steel Swivel Base Recessed Rod Holder - Medium - 2" OD Tube x 6.5" for small curved ends?
What is the diameter (inches) of the product?
What is the product angle of the product?
What is the finish of the product? br/>Who is Lee's Tackle? For over 85 years, Lee's Tackle has had a well-established reputation for conbuild the highest quality equipment using the finest marine materials. As the third generation, Lee's Tackle is proud to continue its tradition. Whether you own a 15-foot flat skiff or a 120-foot super sportfisherman, you will. find a Lee's Tackle product that meets your needs. How to describe the Lee Stainless Steel 30° Swivel Base Flush Mount Fishing Rod Holder - Medium - 2" OD X 6.5" Tube f/Small Bent But is it? With 2" OD x 6-1/2" long tube. There's no doubt that our rotating bottom rod holder is the ultimate rod holder for serious athletes. Mainly designed to bend the buttocks... How long is the product? (Inch) 6-1/2" What is the construction of the product? Stainless SteelHow to mount or what is the mounting style of the Stainless Steel 30° Swivel Base Flush Mount Rod Holder Lee - Medium- 2" Tube OD X 6.5" for small curved ends? FlushWhat is the diameter (inches) of the product? 2"What is the angle of the product? 30 degreesWhat is the finish of the product? Polished

Save $52 when you purchase the Fishing Rod Holder Flush Mount Lee's Stainless Steel 30° Swivel Base - Medium - Tube 2" OD same day before 3 p.m. Lee's Stainless Steel 30° Swivel Base Recessed Fishing Rod Holder - Medium - 2" OD X 6.5" Tube for Small Bent Butts Technical SpecificationsType:

Hunting & Fishing \| Rod Holders
Seller:	Lee's Tackle
Weight:	2.0 lbs
Angle:	30 degrees
Construction:	Stainless steel
Diameter (Inches):	2"
Finish:	Polished
Length (inches):	6-1/2"
Mounting Style:	Recessed

Lee's Stainless Steel 30° Swivel Base Recessed Fishing Rod Holder - Medium - 2" OD X 6 Tube .5" for small curved endssetturn

Shipping weight:	2.0 lbs
Box sizes:	5.00 (h) x 6.00 (w) x 14.00 (w)
Cubic feet:	420.0
Returnable:	Yes

For detailed shipping terms, please see our shipping policy and you can find our shipping policy return and refund here.