Lenco 101 Standard Actuator 12V 2-1/4" Stroke Boat Outfitting

Attributes of the Lenco 15054001 model

Stroke length: 2-1/4 inches
Voltage: 12 volts
Dimensions: 2- 1/2 inch diameter x 12-1/8 inch length
Mounting hole size: 5/16 inch top hole and 5/16 inch end hole
Includes: with 5/16 inch mounting hardware / 6 foot cable

Lenco Technical Bulletins 15054001

Trim_Tab_Actuator_Rep_Guide_2018_TCHDAT.pdf

101 Actuator - 12 Volt - 2- 1/4 Stroke with Mounting Hardware

The 101 Actuator is used in all Standard, Edge Mount and Standard Performance kits . 2.25 shots. Total length (from tip to top) is 12.5 inches. Instant response electric actuators are made from high impact, ultraviolet resistant, fiberglass filled nylon material with super polished 316 stainless steel tubing.

Specifications:

Newly implemented anti-extrusion joint stabilization (AXR) system.
Stronger top cap and mounting yoke
Improved pressure-tight Torx screws
Integrated wiper seal in actuator base
Cast brass thrust bearing design
Thicker and stronger motor housing wall
Improved O-ring design for a more consistent seal
Overmolded cable provides a stronger seal
Mounted bracket top mount with gland seal

Features:

Lenco ball screw design is more reliable and twice as powerful as conventional hydraulics
Lenco's heavy-duty, high-torque actuator motor easily pushes 500 pounds.
Lenco actuator connections use Deutsch waterproof "Plug & Play" connectors eliminating the possibilityility of water intrusion.
12 volts
12 volts
Mounting hardware 5/16"
Cable of 6 feet

This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.

Lenco Marine 15054-001 L The 2-1/4 inch stroke actuator helps keep the marine engine running normally. It's easy to install, so you can refill water with minimal downtime...
ID. PRODUCT: 29122
SKU: NVN-29122
CSKU: CWR-29122
REWRITE: 40233-lenco-101-standard-actuator-12v
MPN: 15054-001
UPC: 874847003186
br>ASIN:
WSKU: LEN15054001
SSKU: LEN-15054-001
KSKU: LEN15054001
GSKU:
MSKU:
LSKU: 622- 15054001
NAME: Actuator standard Lenco 101 - 12V - 2-1/4" Stroke
EX_NAME: LENCO 12V ACTUATOR 2 1/4" STROKE WITH 6' WIRE
PTITLE: Lenco 101 Standard Actuator - 12V - 2-Stroke 1/4"
TYPE: Boat Equipment | Trim Accessories
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Lenco 101 Standard Actuator - 12v - 2 1/4" Stroke - 15054-001

Gtags:

GSpecs:

Lenco 101 Standard Actuator - 12V - 2-1/4" Stroke Product Description Lenco 15054001 Attributes

Stroke Length: 2-1/4 inches
Voltage: 12 volts
Dimensions: 2-1/2 inches diameter x 12-1/8 inches length
Mounting hole size: 5/16 inch Top hole and 5/16 inch end hole
Includes: With 5/16 mounting hardware inch/6ft cable

Lenco Technical Bulletins 15054001

Trim_Tab_Actuator_Rep_Guide_2018_TCHDAT.pdf

Actuator 101 - 12 Volt - 2-1/4 Stroke with Mounting Hardware

Actuator 101 is used in all Standard, Edge Mount and Standard Performance kits Overall length (from tip. to top) is 12.5 inches. Instant response electric actuators are manufacturedMade from a high impact material. Ultraviolet resistant fiberglass filled nylon material with 316 ultra polished stainless steel tube.

Specifications:

Newly implemented anti-extrusion joint stabilization (AXR) system.
Stronger top cap and mounting clevis
Improved pressure-tight Torx screws
Integrated wiper seal at base actuator
Cast brass thrust bearing design
Cast wall thicker, stronger motor housing
Improved O-ring design for more consistent sealing
Overmolded cable provides stronger sealing
Top mounting bracket with gland seal

Features:

Lenco's ball screw design is more reliable and twice more powerful than that of cl hydraulic systemsClassic
Lenco's heavy-duty, high-torque actuator motor easily pushes 500 pounds.
Lenco actuator connections are waterproof. Deutsch Plug & Play connectors eliminate the possibility of water intrusion.
12 Volts
5/16" mounting hardware
6 foot

This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), which is known to the State of California to cause cancer, birth defects or other reproductive harm For more information, go to P65Warnings.ca.gov.

Lenco Marine 15054-001 2-stroke actuator. 1/4 inch helps keep the marine engine running normally It is easy to install, so you can fill water with minimal downtime...

Lenco standard actuator. 101 - 12V - 2-1/4" Stroke Related ProductsLenco 2 Delrin Mounting Pins for Actuators101 and 102 (2-pack)
Lenco Actuator Extension Harness - 7' - 16 Awg
Lenco Actuator Extension Harness - 14' - 16 Awg
D Lenco Actuator Extension - 20' - 14 Awg
Lenco Actuator Extension Harness - 32' - 12 Awg
Lenco Actuator Extension Harness - 45' - 10 AWG
Lenco Actuator Extension Harness - 26' - 12 AWG

Frequently Asked Questions (FAQ) about Lenco 101 Actuator Bracket - 12V - 2-1/4 Stroke " Who is Lenco Marine?
How to describe the Lenco 101 standard actuator - 12V - Stroke 2-1/4"?
What is the operating voltage of the product?
What is the operating voltage of the product?
What is the type of product?
What is the length of the product?
What is the length of the product?
What is the weight of the product?
What are the dimensions of the product?
Who is Lenco Marine? Trim tabs make the biggest differenceante in how your boat will sail and operate. Lenco compensators will make your boating experience smoother, drier, faster and with increased safety, whether on a high-performance family cruiser or a small skiff. Lenco's ball screw design is more reliable, twice as powerful and has an instant response that makes it very user-friendly. How to describe the Lenco 101 Standard Actuator - 12V - 2-1/4" Stroke? Lenco Marine 15054 -001 2-1/4" Stroke Actuator helps keep marine engine running to operate normally. It is easy to install, so you can refill water with minimal downtime...

The 101 actuator is used in all Standard, Edge Mount and kits. Standard Performance.
2.25 stroke Overall length (tip to top) is 12.5 inches.
Instant Response Electric Actuators

Actuator 101 is usedin all standard performance, edge-mount and standard models. kits.
2.25 stroke for instant response
12.5 inches long
Feature Description: - Actuator 101 is used in all standard, edge-mount and off-the-shelf performance. kits.
2.25 strokes for instant response
12.5 inches long

What is the operating voltage of the product? 12 Volts

Actuator 101 is used in all Standard, Edge Mount and Standard Performance kits.
2.25 strokes. Overall length (tip to top) is 12.5 inches.
Instant Response Electric Actuators
Actuator 101 is used in all Standard Kits, Edge Mount and Standard Performance.
2.25 stroke for instant response
12.5 inches long
Feature Description: - The 101 actuator is used in all standard kitsd, Edge Mount and Standard Performance.
2.25 strokes for instant response
12.5 inches long
Lenco actuators are the best in industry.
Lenco actuators are twice as powerful as hydraulic actuators.
The ball screw design is more reliable and lasts longer than conventional hydraulic systems.
The Lenco actuator is a ball screw design that is more reliable and twice as powerful as a conventional hydraulic system.
It is easy to install and can push up to 'to 500 pounds - a perfect option for those who need a powerful actuator with a small footprint.

What is the operating voltage of the product? 12What is the type of product? TT/TBWhat is the length of the product? 12-1/8"What is the length of the product? 12-1/8"What is the weight of the product? 4What are the dimensions of the product? 2-1/2 inches in diameterbe x 12-1/8 inch length

Save $140 when you purchase the Lenco 101 Standard Actuator - 12V - 2-1/ Stroke 4"for only $180 at NVN Marine! Same day shipping before 3pm. Lenco 101 Standard Actuator - 12V - 2-1/4" Stroke Videos Lenco 101 Standard Actuator - 12 V - 2-1/4" Stroke Technical Specifications

Type:	Boat Outfitting \| Trim Tab Accessories
Supplier:	Lenco Marine
Weight:	3.2 lbs
User Guide:	Download PDF

Lenco 101 Standard Actuator - 12 V - 2-1/4" Stroke User ReviewsLenco 101 Standard Actuator - 12 V - 2-1/4" Stroke ok Shipping and return

Shipping weight:	3.2 lbs
Box Sizes:	3.00 (h) x 4.00 (l) x 14.00 (l)
Cubic feet:	168.0
Returnable:	Yes
P65:	Yes

For detailed shipping terms, please visit our Shipping Policy page and you can find our return policy and refund here.