Lenco 12" x 12" Edge Mount Trim Tab Kit without Switch Kit 12V Boat Outfitting
Dash Mount Trim Tab Kit, 12 Gauge Blades / 12 Volt Actuators Trim tabs make the most important difference in how your boat rides and operates. They are optional on some boats but should be as standard as power trim and tilt. Lenco compensators make your boating smoother, drier, faster and with increased safety, whether on a small skiff or a mega-yacht. Lenco's ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly compared to conventional hydraulic systems. We also like to be oil-free and environmentally conscious. Lenco electric trim kits make your boating experience smoother, drier, faster and with increased safety, whether on a small skiff or a large yacht. The design of b screwsilles Lenco are more reliable, three times more powerful and feature instant response, making them very user-friendly compared to conventional hydraulic systems. Lenco quick response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount to the trailing edge of the aircraft, requiring 4 inches less transom height than standard Lenco mount trim tabs. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. at the trailing edge of the aircraft, requiring 4" (10.16 cm) less transom height than standard Lenco mount trim tabs.
Lenco Attributes 15016101- L Size tab: 12 inches long x 12 inches wide
- Material: Stainless Steel
- Gauge12 - Stainless Steel Blades
- Fast Response Electric Actuators
- Fully Submersible Actuators
- Plug and Play Waterproof Connectors
- Switch Kit sold separately
- 3 year limited warranty
- Trim_Tab_Manual_TCHDAT.pdf
- size_diagram_edge_mount_TCHDAT.pdf
- standard_performance_diagram_TCHDAT.pdf
12" x 12" Edge Mount Decorative Tab Kit without Kit -12V switch
Lenco electric trim kits make your boating smoother, drier, faster and with increased safety, whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly compared to conventional hydraulic systems.Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount to the trailing edge of the aircraft, requiring 4" (10.16 cm) less transom height than standard Lenco mount trim tabs.
Kit Contents:
- 2 12 gauge stainless steel trim tab blades
- 2 each of actuator #15054-001 with 6 cables ' and Deutsch plugs
- 2 each of #30133-103 20' Actuator Extension Wire Harnesses
- 2 Top Mounting Brackets #15085-001 (116) with gasket
- 2 lower mounting brackets #50014-001 (119)
- 1 each Lenco Owner's/Installation Manual
- All stainless steel mounting hardware needed
Specifications:
- Suggested Boat Length: 17' to 30'
- Tab Length: 12"
- Tab Width: 12"
- Hinge Height: 2"
- Minimum Transom Height: 11"
- Blades: 12 Gauge Stainless Steel
- Finish: Smooth
- Switch Kit: Sold Separately
- Rating: Fuel Efficient
- Compliance: CE certified
- Compatibility: any boat
- Actuators: 12 volts
This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to P65Warnings.ca.gov.
The edge mounts actuator on the rear edge of the aircraft, and the required crosshead height is 4 inches shorter than the standard mounting frame. Clipped wings are the most important difference between the wayhow you operate a boat and how you drive. They are optional on some vessels, but should come standard with powerful trim and tilt functions. Lenco's tuning sheet makes your navigation smooth, dry and faster, and improves safety. Whether on a small boat or a large yacht, Lenco's ball screw design is more reliable, three times stronger and has instant response capabilities, they are very easy to use compared to conventional hydraulic systems. We also like the oil-free, eco-friendly features, instant-response electric actuators for precise control; all parts are completely submerged in water, maintenance free and sealed for life; the self-locking ball screw will not drift even when moving backwards. When the #12 laser cut stainless steel decorative sheet is flat, after years of usetion, the high-strength corrosion-resistant supportThe seat is also beautiful, clean and saves time and space. 12 edge trim
MPN: 15016-101
UPC: 874847004374
ASIN: B001F0IFCY
WSKU: LEN15016101
SSKU: LEN-15016-101
KSKU: LEN15016101
br>GSKU:
MSKU:
LSKU: 622-15016101
NAME: Lenco 12" x 12" Edge Trim Kit without Switch Kit 12V
NAME_EX: LENCO 12" EDGEMOUNT KIT WITHOUT SWITCH TT12X12ENS
PTITLE: Lenco 12" x 12" Edge Mount Trim Tab Kit without Switch Kit 12V
TYPE: Boat Equipment | Trim Tabs
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
LENCO MARINE 15016-101 Trim Tabs Kit edge mount trim tabs Without switch - 12" x 12"
Lenco Marine Edge Mount Trim Tab Kit, 12" x 12"
Categoryrie Amazon:
Gtags:
| Lenco |
GSpecs:
Lenco 12" x 12" Edge Mount Trim Tab Kit without 12V Switch Kit Product Description
Edge Mount Trim Tab Kit 12 gauge blades / 12 volt actuators Trim tabs make the biggest difference in how your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco compensators make your boating smoother, drier, faster and with increased safety, whether on a small skiff or a mega-yacht. Lenco's ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly compared to conventional hydraulic systems. We also like to be oil-free and environmentally conscious. Lenco electric trim kits make your boating experience smoother, moredry, faster and with increased safety, whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly compared to conventional hydraulic ball screws. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount to the trailing edge of the aircraft, requiring 4 inches less transom height than standard Lenco mount trim tabs. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. at the trailing edge of the aircraft, requiring 4" (10.16 cm) less transom height than standard Lenco mount trim tabs.
Lenco Attributes 15016101- Tab size: 12 inch length x 12 inch width
- Material: Stainless Steel
- 12 Gauge - Stainless Steel Blades
- Fast Response Electric Actuators
- Fully Submersible Actuators
- Plug and Play Waterproof Connectors
- Switch kit sold separately
- 3 years limited warranty
- Trim_Tab_Manual_TCHDAT.pdf
- size_diagram_edge_mount_TCHDAT.pdf
- standard_performance_diagram_TCHDAT.pdf
Tab Kit 12" x 12" Edge Mount Trim Kit Without Switch Kit -12V
Lenco Electric Edge Mount Trim Kits Make Your Boating Smoother, Drier, faster and with increased safety, whether on a small skiff or a larged yacht. The Lenco ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly compared to conventional hydraulic systems. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount to the trailing edge of the aircraft, requiring 4" (10.16 cm) less transom height than standard Lenco mount trim tabs.
Kit Contents:
- 2 each of 12 gauge stainless steel Drift Blades
- 2 each of actuator #15054-001 with 6' cables and Deutsch plugs
- 2 each of 20' actuator extension wire harnesses #30133-103
- 2 top mounting brackets #15085-001 (116) with gasket
- 2 lower mounting brackets #50014-001 (119)
- 1 of eachLenco Owner's/Installation Manual
- All necessary stainless steel mounting hardware
Specifications:
- Suggested Boat Length: 17' to 30'
- Tab Length: 12"
- Tab Width: 12"
- Hinge Height: 2"
- Minimum Transom Height: 11"
- Blades: 12 Gauge Stainless Steel
- Finish: Smooth
- Switch kit: sold separately
- Class: fuel efficient
- Compliance: CE certified
- Compatibility: any boat
- Actuators: 12 volts
This product can expose you to chemicals including the known di(2-ethylhexyl) phthalate (dehp). of the State of California. Among other things, it may cause cancer, birth defects, or other reproductive harm. For more information,
The bord mounts the actuator on the rear edge of the aircraft, and the required crosshead height is 4 inches lower than the standard mounting frame. Clipped fenders are the most significant difference between how you ride a boat and how you ride a boat. They are optional on some vessels, but should come standard with powerful trim and tilt functions. Lenco's tuning sheet makes your navigation smooth, dry and faster, and improves safety. Whether on a small boat or a large yacht, Lenco's ball screw design is more reliable, three times stronger and has instant response capabilities, they are very easy to use compared to conventional hydraulic systems. We also like the oil-free, eco-friendly features, instant-response electric actuators for precise control; all parts are completely immerected in water, maintenance-free and sealed for life; self-locking ball screwI do not drift, even when moving backwards. When the No.12 laser-cut stainless steel decorative sheet is flat, after years of use, the high-strength and corrosion-resistant mounting seat is also beautiful, clean and saves time and effort. 'space.
Lenco 12" x 12" Edge Mount Trim Tab Kit without 12V Switch Kit Related ProductsLenco Top Mount Bracket with Gasket (2008-Present)
Bracket Lenco Compact Top Mount Bracket - 2 Screws 1 Wire
Lenco Standard Top Mount Bracket - 3 Screws 1 Wire
Lenco Standard Bottom Mount Bracket - 3 Bolts
Tecnoseal R1 Rudder Anode - Zinc - 1-7/8" diameter
Tecnoseal R2 rudder anode - Zinc - 2-13/16" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" diameter
Tecnoseal R1AL rudder anode- Aluminum - 1-7/8" Diameter
Tecnoseal R2AL Rudder Anode - Aluminum - 2-13/16" Diameter
Tecnoseal R3AL Rudder Anode - Aluminum - 3-3/4" Diameter
Frequently Asked Questions (FAQ) about Lenco 12" x 12" Edge Mount Trim Tab Kit without 12V Switch Kit Who is Lenco Marine?
How to describe the Lenco 12" x 12" Edge Mount Trim Tab Kit without 12V Switch Kit?
What is the working voltage of the product?
What is the working voltage of the product ?
What is the warranty policy for Lenco 12" x 12" edge trim kit without 12V switch kit
What is the product type?
What is the product? material of the Lenco 12" x 12" edge trim kit without 12V switch kit?
What is the weight of the product?
What is the size?
What is the style of the product?
What are the dimensions of the product?
What is the compatibility of this product?
What is the finish of the product?
Who is Lenco Marine? Trim tabs make the most important difference in how your boat will sail and operate. Lenco trim tabs will make your boating experience smoother, drier, faster and with increased safety, whether on a high performance boat, family cruiser or small skiff. Lenco's ball screw design is more reliable, twice as powerful and offers instant response which makes them very user-friendly. How to describe the Lenco 12" x 12" Edge Mount Trim Tab Kit without 12V Switch Kit? The edge mounts the actuator to the rear edge of the aircraft and the required crosshead height is 4 inches lower than the standard mounting frame. Clipped fenders are the most important difference between how you drive a boat and how youhave you driven. They are optional on some vessels, but should come standard with powerful trim and tilt functions. Lenco's tuning sheet makes your navigation smooth, dry and faster, and improves safety. Whether on a small boat or a large yacht, Lenco's ball screw design is more reliable, three times stronger and has instant response capabilities, they are very easy to use compared to conventional hydraulic systems. We also like the oil-free and eco-friendly features, instant-response electric actuators for precision control; all parts are completely submerged in water, maintenance free and sealed for life; the self-locking ball screw will not drift even when moving backwards. When the No.12 laser cut stainless steel decorative sheet is flat, after years of use, the high strength mounting seate and corrosion resistant is also beautiful, clean and saves time. and space.
- Edge Mount Trim Kit without Switch Kit
- 12" x 12"
- Lenco Electric
- 12" x 12" Edge Mount Trim Tab Kit Without Switch Kit -12V Lenco Electric Edge Mount Trim Tab Kits Make Your Boating More softer, drier, faster and with increased safety, whether on a small skiff or a large yacht. The Lenco Ball Screw
- The Lenco Ball Screw is designed to operate at speeds up to 2000 rpm. This provides the best performance and maximum life for the trim tab.
- When you are ready to install, simply drill out the rivets and remove the old trim tab. Next, install our
Lenco 12"boat applications where a lower actuator mounting height is desirable. The actuator mounts to the trailing edge of the blade, giving it a mounting height of 13.5" (34.29 cm). This kit includes everything you need to install the actuator on your boat.
What is the operating voltage of the product? 12- Dash Mount Trim Tab Kit without Switch Kit
- 12" x 12" li>
- Lenco Electric
- 12" x 12" Edge Mount Trim Tab Kit Without Switch Kit - Lenco 12V Edge Mount Electric Trim Tab Kits Make Navigation Easy of your boat smoother, drier, faster and with increased safety, whether on a small skiff or a large yacht.
- The Lenco ball screw is. designed to operate at speeds up to 2,000 rpm This provides the best performance and longest life.e maximum life for the fin.
- When you are ready to install, simply drill out the rivets and remove the old trim. Then screw in our
- Mount your actuator lower.r for a sleeker look
- Requires switch model: 15016-101
- When you need to mount the actuator lower than the top of the blade, this kit is perfect for you.
- li>
- The actuator mounts to the trailing edge of the blade, giving it a 13.5" (34.29 cm) mounting height.
- Designed for boats where a lower actuator mounting height is desirable.
- More powerful than hydraulic trim tabs
- Responds instantly to rudder commands
- Lenco Owner's/Installation Manual
- All steel parts stainless steel required mounting hardware
- Corrosion resistant 304 stainless steel tongue blades
- ConDeutsch waterproof "plug and play" connections make installation easy
- All stainless steel mounting hardware
- 12 gauge stainless steel trim tab blades (2)
- Actuator #15054-001 with 6' cables and Deutsch plugs (2)
- #30133-103 20' actuator extension cable harnesses (2)
- Top mounting brackets #15085-001 with gland gasket (2)
- Lower mounting brackets #50014-001 (2)
Save $418 when you purchase the Lenco 12" x 12" Edge Mount Trim Tab Kit without 12V Switch Kit for only $532 from NVN Marine! Same day dispatch before 3 p.m. Lenco 12" x 12"or; Edge Mount Trim Tab Kit without Switch Kit 12V Videos Lenco 12" x 12" Edge Mount Trim Tab Kit without Switch Kit 12V Technical Specifications
| Type: | Boat outfitter | Compensating Tabs |
|---|---|
| Seller: | Lenco Marine |
| Weight: | 20.0 lbs |
| Product brochure: | Download the PDF |
| Shipping Weight: | 20.0 lbs |
|---|---|
| Box Sizes: | 6.00 (h) x 14.00 (w) x 14.00 (l) |
| Cubic feet : | 1176.0 |
| Retractable: | Yes |
| P65: | Yes |
For conditions detailed shipping policies, please see our shipping policy and you can find our return and refund policy here.
- Lenco 12" x 12" Edge Mount Trim Tab Kit with Double Toggle Switch Kit
- Lenco 102XD Extreme Duty Actuator - 24V - 4-1/4" Stroke - 5/16" Hardware
- Lenco 102XD Extreme Duty Actuator 12V 4-1/4" Stroke
- Lenco Series 102 Standard Actuator 24V 4-1/4" Stroke
- Lenco Series 102 Standard Actuator 12V 4-1/4" Stroke
- Lenco 101XDS Extreme Duty Short Actuator - 12V - 2-1/4" Stroke with 5/16" Hardware
- Lenco 101XDS Extreme Duty Short Actuator - 12V - 2-1/4" Stroke with 3/8" Hardware
