Sale!

Lenco 12" x 12" Standard Trim Kit without 12V Switch Kit

$96

SKU: Lenco 12" x 12" Standard Trim Kit without 12V Switch Kit
Category:

Lenco 12" x 12" Standard Trim Kit without 12V Switch Kit Boat Outfitting

12" x 12" Standard Mount Trim Tab Kit without Switch Kit - 12V

Lenco Electric Standard Mount Trim Tab Kits make your navigation by boat softer, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features instant response, making them very user friendly compared to conventional hydraulic systems.

Lenco quick response electric actuators are fully submersible and all waterproof plug & play. German connections. The Trim Tab blades are 12 gauge - 304 SS with a 5/8" flared trailing edge and a 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.

Kit Contents:

  • 2 steel trim tab blades 12 gauge stainless steel of each
  • 2 each of actuator #15054-001 with 6' cables and Deutsch plugs
  • 2 each of 20' actuator extension wire harness #30133 -103
  • 2 each of upper mounting brackets #15085-001 (116) with cable gland
  • 2 lower mounting brackets #50014-001 (119)
  • 1 each of Lenco user and installation manuals
  • All necessary mounting hardware made of stainless steel

Specifications:

  • Suggested boat length: 17' to 30'
  • Tab length: 12"
  • Tab width: 12"
  • Hinge Height: 2"
  • Min Transom Height: 14"
  • Blades: 12 Gauge Stainless Steel
  • Finish: Smooth
  • Switch kit: sold separately
  • Class: Fuel efficient
  • Conformity: CE certified
  • Compatibility: n 'any boat
  • Actuators: 12 volts

This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information,



TT12x12SwitchNo SwithBoat Length 17'-30' Tab Length 12" Tab Width 12" Decorative Tab offers the most significant difference between sailing and driving styles They are optional on some vessels, but must be used as standard equipment for power adjustment and tilt. Lenco's decorative panels make your navigation smooth, dry and fast, whether on a small boat or a large yacht, with increased safety The design of the vi.Lenco's ball bearing is more reliable, three times more powerful and has an instant response function. Compared to conventional hydraulic systems, they are very easy to use.
PRODUCT ID: 29313
SKU: NVN-29313
CSKU: CWR-29313
REWRITE: 40424-lenco-12-x-12-standard-trim-tab
MPN: 15007- 101
UPC: 874847004282
ASIN: B001F0M6BU
WSKU: LEN15007101
SSKU: LEN-15007-101
KSKU: LEN15007101
GSKU:
MSKU:
LSKU:
NAME: Lenco 12"x12" Standard Trim Kit NO SWITCH 12V
NAME_EX: LENCO 12"X12" TRIM TAB KIT NO SWITCH TT12X12NS
PTITLE: Lenco Standard Trim Tab Kit 12" x 12" without 12V switch kit
TYPE: Boat fitting | Trim Tabs
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

LENCO MARINE Trim TAB KIT W/O Switch 12 x 12
Lenco 12"X12" Trim Tab Kit W/O Switch Tt12x12ns 15007-101

Gtags:
Lenco

GSpecs:

Lenco 12" x 12" Standard Mount Trim Tab Kit without Switch Kit 12V Product Description

12" x 12" Standard Mount Trim Tab Kit without Switch Kit - 12V

Lenco Electric Standard-fit trim tab kits make your boating smoother, drier, faster and with increased safety, whether on a small skiff or a large yacht . The Lenco ball screw design is more reliable, three times more powerful and features instant response, making them very user friendly compared to conventional hydraulic systems.

Lenco quick response electric actuators are fully submersible and all waterproof plug & play. German connections. The Trim Tab blades are 12 gauge - 304 SS with a 5/8" flared trailing edge and a 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.

Kit Contents:

  • 2 each 12 gauge stainless steel trim tab blades
  • 2 each actuator #15054-001 with cables 6' and Deutsch plugs
  • 2 each of actuators #30133-103 20' ext. ension wire harnesses
  • 2 top mounting brackets #15085-001 (116) with gasket
  • 2 Lower Mounting Brackets #50014-001 (119)
  • 1 Lenco User/Installation Manual
  • All necessary stainless steel mounting hardware

Specifications:

  • Suggested boat length: 17' to 30'
  • Tab Length: 12"
  • Tab Width: 12"
  • Hinge Height: 2"
  • Minimum Height transom height: 14"
  • Blades: 12 gauge stainless steel
  • Finish: smooth
  • Switch kit: sold separately
  • Class: fuel efficient
  • Compliance: CE certified
  • Compatibility: Any boat
  • Actuators: 12 volts

This product can expose you to chemicals, including di(2-ethylhexyl) phthalate (dehp), known to the State of California to cause cancer and birth defects. or other reproductive problems. For more information,



TT12x12SwitchNoSwithBoat Length17'-30'Tab Length12 "Tab Width12" Decorative Tab Delivers the Difference the most important between boating and driving styles. They are optional on some vessels, but must be used as standard equipment for power and tilt adjustment. Lenco's decorative panels make your navigation smooth, dry and fast, whether on a small boat or a large yacht, with increased safety. Lenco's ball screw design is more reliable, trois times more powerful and has an instant response function. Compared to conventional hydraulic systems, they are very easy to use.

Lenco 12" x 12" Standard Trim Kit without 12V Switch Kit Related ProductsLenco Top Mount Bracket with Gland Gasket (2008-Present)
Compact Top Mount Bracket Lenco - 2 screws 1 thread
Lenco standard upper mounting bracket - 3 screws 1 thread
Lenco standard lower mounting bracket - 3 bolts
Tecnoseal R1 rudder anode - Zinc - 1-7/ 8" Diameter
Tecnoseal R2 Rudder Anode, Zinc, 2-13/16" Diameter
Tecnoseal R3 Rudder Anode - Zinc - 3-3/4" Diameter
Rudder Anode Tecnoseal R1AL - Aluminum - 1-7/8" diameter
Tecnoseal R2AL rudder anode - Aluminum - 2- 13/16" diameter
Tecnoseal R3AL rudder anode - Aluminum - 3-3/4 " in diameter


Frequently asked questions (FAQ) about theLenco Standard Trim 12" x 12" Tab Kit without 12V Switch Kit Who is Lenco Marine?
How to describe the Lenco 12" x 12" Standard Trim Kit without 12V Switch Kit?
Who is Lenco Marine? Trim tabs make the most important difference in how your boat will sail and operate. Lenco compensators will make your boating experience smoother, drier, faster and with increased safety, whether on a high-performance family cruiser or a small skiff. Lenco's ball screw design is more reliable, twice as powerful and features an instant response that makes them very user-friendly. How to describe the standard Lenco 12" x 12" Trim Tab K without Switch Kit 12V? TT12x12SwitchNo SwithBoat Length17'-30'Tab Length12" Tab Width12" Decorative tab provides the most significant difference between boating and riding styles. They are optionalon some vessels, but should be used as standard equipment for power and tilt adjustment. Lenco's decorative panels make your navigation smooth, dry and fast, whether on a small boat or a large yacht, with increased safety. Lenco's ball screw design is more reliable, three times more powerful and has an instant response feature. Compared to conventional hydraulic systems, they are very easy to use.
  • Lenco ball screws are designed to be as simple as possible to install and maintain.
  • These trims are a perfect solution for those who want to take control of their boat's trim.
  • Lenco standard mount electric daggerboard kits have been designed to be the best on the market, with a wide range of options mounting and a variety of power options. .
  • Lencoles ball screws are designed to be the latesttrim tab you'll need.
  • The 12" x 12" standard mount trim tab kit without switch kit is designed to work with any boat with a mounting system standard, and comes with everything you need to install it.
  • Kit includes trim tab set, mounting brackets, stainless steel hardware, and instructions.

"If you are looking for a trim tab that is easy to install, affordable and will get the job done, look no further. Lenco is the way to go. - Tom from Ohio. The Kit Lenco 12" b> when you purchase the Lenco 12" x 12" Standard Trim Kit without 12V Switch Kit for only $491 from NVN Marine Same Day Shipping!me before 3 p.m. Lenco 12" x 12" Standard Trim Kit without 12V Switch Kit Technical Specifications

Type:

Boat Equipment | Compensating Tabs

Seller:

Lenco Marine

Weight:

18.45 lbs

Product brochure:

Download the PDF

Lenco Standard Trim Kit 12" x 12" without 12V Switch Kit User ReviewsLenco Standard Tab Kit 12" x 12" without 12V switch kit Shipping & Returns
Shipping Weight:

18.45 lbs

Box sizes:

5.00 (h) x 13.00 (w) x 14.00 (w)

Cubic feet:

910.0

Returnable:

Yes

P65:

Yes

To know the conditionsDetailed shipping instructions Please see our shipping policy and you can find our return and refund policy here.