Sale!

Lenco 12" x 36" Standard Trim Kit without 12V Switch Kit

$108

SKU: Lenco 12" x 36" Standard Trim Kit without 12V Switch Kit
Category:

Lenco 12" x 36" Standard Trim Kit without 12V Switch Kit Boat Outfitting

12" x 36" Standard Mount Trim Tab Kit Without Switch Kit - 12V

Lenco Electric Standard Mount Trim Tab Kits Make Your Boating Safe by boat softer, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features instant response, making them very user friendly compared to conventional hydraulic systems.

Lenco quick response electric actuators are fully submersible and all waterproof plug & play. German connections. The Trim Tab blades are 12 gauge - 304 SS with a 5/8" flared trailing edge and a 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.

Kit Contents

  • 2 stainless steel trim tab blades 12 gauge
  • 2 de each of actuator #15054-001 with 6' cables and Deutsch plugs
  • 2 of each of 20' actuator extension wire harness #30133-103
  • 2 each of #15085-001 (116) upper mounting brackets with cable gland
  • 2 lower mounting brackets #50014-001 (119)
  • 1 each of Lenco user and installation manuals
  • All necessary mounting hardware made of stainless steel

Specifications:

  • Suggested boat length: 38' to 69'
  • Tab length: 12"
  • Tab width: 36"
  • Hinge Height: 1"
  • Min Transom Height: 14"
  • Blades: 12 Gauge Stainless Steel
  • Finish: Smooth
  • Switch kit: sold separately
  • Class: Fuel efficient
  • Compliance: CE certified
  • Compatibility: any boat
  • li>
  • Actuators: 12 volts

This product can expose you to chemicals, including phthalate di(2-ethylhexyl) (dehp), known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.



Lenco decorative sheets make your boating smooth, dry and faster, and improve safety, whether on small boats or large yachts. Lenco ball screws are reliable in. their design, powerful,... -standard finishing tab
MPN: 15011-101
UPC: 00874847004329
ASIN:
WSKU: LEN15011101
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Lenco 12" x 36" Standard Trim Tab Kit without 12V Switch Kit
EX_NAME: LENCO 12" X Trim Tab KIT 36" SANS SWITCH TT12X36NS
PTITLE: Lenco 12" x 36" standard trim kit without 12V switch kit
TYPE: Boat outfitting | Trim Tabs
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES 12" X 36 "12 Voltskit de Trim (12 GA) Without switch

gtags:
Lenco
GSpecs:

Lenco 12" x 36" Standard Mount Drift Kit without Switch Kit 12V Product Description

12" x 36" Standard Mount Drift Kit without Switch Kit -12V

Lenco Electric Standard-fit trim tab kits make your boating smoother, drier, faster and with increased safety, whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features instant response, making them very user friendly compared to conventional hydraulic systems.

Lenco quick response electric actuators are fully submersible and all waterproof plug & play. German connections. The Trim Tab blades are 12 gauge - 304 SS with a 5/8" flared trailing edge and a 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.

Kit Contents

  • 2 12 gauge stainless steel trim tab blades
  • 2 each of actuators #15054-001 with 6' cables and Deutsch plugs
  • 2 each of actuators #30133-103 20' ext. ension wire harnesses
  • 2 upper mounting brackets #15085-001 (116) with gasket
  • 2 lower mounting brackets #50014- 001 (119)
  • 1 Lenco User/Installation Manual
  • All necessary stainless steel mounting hardware

Specifications:

  • Suggested boat length: 38' to 69'
  • Tab length: 12"
  • Width tongue height: 36"
  • Hinge height: 1"
  • Minimum transom height: 14"
  • Blades: 12 gauge stainless steel
  • Finish: smooth
  • Switch kit: sold separately
  • Class: fuel efficient
  • Compliance: CE certified
  • Compatibility: any boat
  • Actionrs: 12 volts

This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), known by the State of California to cause cancer, birth defects, or other reproductive harm. harm. For more information, go to P65Warnings.ca.gov.



Lenco Decorative Sheets make your boat run smoother, drier and faster, and improve safety, whether whether on small boats or large yachts. Lenco Ball Screws are reliable in design, powerful,...

Lenco 12" x 36" Standard Trim Tab Kit without 12V Switch Kit Related ProductsLenco Top Mounting Bracket with Gasket (2008-present)
Lenco Compact Top Mount Bracket - 2 Screws 1 Wire
Lenco Standard Top Mount Bracket - 3 Screws 1 Wire
Lenco Standard Bottom Mount Bracket - 3 boulons
Tecnoseal R1 rudder anode - Zinc - 1-7/8" diameter
Tecnoseal R2 rudder anode - Zinc - 2-13/16" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" diameter
Tecnoseal R4 Rudder Anode - Zinc - 5" diameter x 5/8" thick
Tecnoseal R1AL Rudder Anode - Aluminum - 1-7/ 8" Diameter
Tecnoseal R2AL Rudder Anode - Aluminum - 2-13/16" Diameter


Frequently Asked Questions (FAQ) about Standard Trim Tab Kit Lenco 12" x 36" without 12V switch kit Who is Lenco Marine?
How to describe the Lenco 12" x 36" standard trim kit without 12V switch kit?
Who is Lenco Marine Shutters? Trimmers make the biggest difference in how your boat will sail and operate. Lenco trim tabs will make your boat ride smoother, drier, faster and with increased safety, whether on a performance family cruiser.rmant or a small skiff. Lenco's ball screw design is more reliable, twice as powerful and features an instant response that makes them very user-friendly. How to describe the Lenco 12" x 36" Standard Trim Tab Kit without 12V Switch Kit? Lenco decorative covers make your boating smooth, dry and faster, and improve safety, whether on small boats or large yachts. Lenco ball screws are reliable, powerful,...
  • The Lenco Standard Mount Trim Tab Kit is designed for use with all boats.
  • It includes a 12" x 36" standard mount fin, mounting bracket pouches, hardware and instructions.
  • The 12" x 36" size can be cut to fit any boat, from small skiff to large yacht.
  • Standard mount trim tab kit 12" x 36" without switch kit
  • TheLenco Electric standard fit trim tab kits make your boat ride smoother, drier, faster and with increased safety, whether on a small skiff or a large yacht. The Lenco Standard Mount Fin Kit is the perfect solution for your boat's needs.


Save $582 on the purchase of the Lenco 12" x 36" Standard Trim Kit without 12V Switch Kit for only $774 from NVN Marine! Same day dispatch before 3 p.m. Lenco 12" x 36" Standard Trim Kit without Switch Kit 12V Technical SpecificationsProduct Brochure:
Type:

Boat Equipment | Compensating Tabs

Seller:

Lenco Marine

Download PDF

Lenco 12" x 36" Standard Decorative Tab Kit without 12V Av user switch kitisLenco 12" x 36" Standard Trim Kit without 12V Switch Kit Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our return & refund policy here.