Lenco 12" x 9" Edgemount Decorative Tab Kit with 12V LED Indicator Switch Boat Outfitting
Onboard mountingMounts the actuator to the trailing edge of the aircraft, requiring 4" of height less transom than standard fitment
Compensators make the most important difference in how your boat rides and performs. They are optional on some boats but should be as standard as electric trim tabs and tilt make your ride smoother, drier. faster and with increased safety, whether on a small skiff or a mega-yacht, Lenco's ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly by compared to conventional hydraulic systems. free and environmentally friendly.
- Instant response electric actuators for precise control
- Everything is fully submersible, maintenance free and sealed for life
- The screwSelf-locking balls will not drift, even when moving backwards
- Laser cut 12 gauge stainless steel drift planes
- Corrosion and impact resistant brackets look great despite years of abuse
- Clean installation, saving time and space
- Actuators are high impact, Ultraviolet resistant nylon housing, 50% fiberglass filled
- 316 super polished stainless steel cylinders
Tactile switch with indicator LED for all single actuator trim tab systems
Features:
- Sealed, self-contained keypad
- Self-contained, sealed control box module
- Fade and stain resistant laser-etched graphics
- Plug & Play switch wiring harness connector
- br>
- Includes 36" electrical pigtail for control box
- 2" hole cutout size, 2.75" x 2.75" overall size
- Returns built-in retracting tabs in fully retracted position when power is off
- 2 high intensity LED indicators show the exact position of our trim tabs at all times.
- The. photo eye reads ambient light and adjusts the LED indicator display Intensity for optimal viewing in bright sunlight
- 12 and 24 volt compatibility
- Includes a self-checking function
Each kit includes:
- Tactile LED Indicator Switch Kit
- 2 actuators with 6' cable and Deutsch plugs
- 2 20' actuator extension wire harnesses
- 2 12 gauge stainless steel centerboard planes
- 2 top mounting brackets with gland gasket
- /li>
- 2 mounting brackets inlower
- All stainless steel mounting hardware
This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), which is known to the State of California to cause cancer, birth defects, or other reproductive harm For more information, go to P65Warnings.ca.gov.
On-board mounting: Mount the actuator on. the trailing edge of a flat surface with a step height 4 inches lower than standard mounting.ng-Trim option board makes the single actuator the largest...
PRODUCT ID : 29306
SKU: NVN-29306
CSKU: CWR-29306
REWRITE: 40417-lenco-12- x-9-edgemount-trim-tab
MPN: TT12X9EI
UPC: 818254382090
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Lenco 12" x 9" Dash Trim Kit with 12V LED Indicator Switch Kit
EX_NAME: LENCO 12" 12" x 9" Edgemount Trim Cover with 12V LED Indicator Switch Kit
TYPE: Boat Equipment | Trim Tabs
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES Lenco 12 " x 9" Edgemount Trim Tab Kit with 12V LED Indicator Switch Kit - TT12X9EI
AmazonCategory:
Gtags:
Lenco |
Specifications G:
Lenco 12" x 9" Edge Trim Kit with 12V LED Indicator Switch Kit Product Description Edge Bracket
Mounts the actuator to the trailing edge of the aircraft, requiring 4" less transom height than standard mounting
Trimming tabs make the most significant difference in how your boat runs and works. They are optional on some boats but should be standard with electric trim and tilt, Lenco trim tabs make your boat smoother, drier, faster and with increased safety, whether on a small skiff or a mega-yacht. Lenco's ball screw design is more reliable, three times more powerful and has an instant. response, making them very user-friendly compared to conventional hydraulic systems. We also like to be oil-free and environmentally friendly.
- Electric Actuatorsinstant response for precise control
- Everything is fully submersible, maintenance-free and sealed for life
- Self-locking ball screw will not work, even when moving backwards
- 12 gauge laser cut stainless steel fin planes
- Corrosion and impact resistant brackets look great despite years of abuse
- br>
- Clean, quick and space-saving installation
- Actuators feature an ultraviolet-resistant nylon housing, 50% fiberglass filled and impact resistant
- 316 super polished stainless steel actuators
Tactile switch with LED indicator for all single actuator trim tab systems
Features:
- Sealed, self-contained keypad
- Housing module self-contained, sealed control
- Fade/smudge Wear-resistant laser-etched graphics
- Plug & Play Switch Wiring Harness Connector
- Includes 36" power pigtail for control box
- 2" hole cutout size, overall size 2.75" x 2.75"
- Built-in retraction feature returns tabs to fully retracted position when power is removed
- 2 high intensity LEDs. indicators show the exact position of our rim tabs at all times
- The photo eye reads the ambient light and adjusts the L.E.D. indicator display intensity for optimal viewing in direct sunlight
- 12 and 24 volt compatibility
- Includes a self-check function
Each kit includes:
- Tactile LED indicator switch kit
- 2 actuators with 6' cable and Deutsch plugs
- 2 bundles of 20 ft actuator extension wires
- 2 p12 gauge stainless steel fin straps
- 2 upper mounting brackets with gland gasket
- 2 lower mounting brackets
- All stainless steel mounting hardware
This product can expose you to chemicals including di(2-ethylhexyl) phthalate ) (dehp), known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,
Edge Mount: Mount the actuator on the rear edge of a flat surface with step height 4 inches lower than standard mount - Trim option board makes single actuator the largest...
Lenco 12" x 9" Edgemount Trim Tab Kit with 12V LED Indicator Switch KitRelated ProductsLenco Top Mount Bracket with Pre Sealsse-etoupe (2008-present)
Lenco Compact Top Mount Bracket - 2 screws 1 thread
Lenco Standard Top Mount Bracket - 3 screws 1 thread
Lenco Standard Bottom Mount Bracket - 3 bolts
Tecnoseal R1 rudder anode - Zinc - 1-7/8" diameter
Tecnoseal R2 rudder anode - Zinc - 2-13/16" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3 /4" diameter
Tecnoseal R1AL rudder anode - Aluminum - 1-7/8" diameter
Tecnoseal R2AL rudder anode - Aluminum - 2-13/16" diameter
Tecnoseal R3AL Rudder Anode - Aluminum - 3-3/4" Diameter
Frequently Asked Questions (FAQ) about Edgemount 12" Trim Tab Kit x 9" Lenco with 12V LED Indicator Switch Kit Who is Lenco Marine?
How to describe the Lenco 12" x 9" Dashboard Trim Kit with 12V LED Indicator Switch Kit?
Who is Lenco Marine? Trim tabs make the differencee most important in how your boat will sail and operate. Lenco compensators will make your boating experience smoother, drier, faster and with increased safety, whether on a high-performance family cruiser or a small skiff. Lenco's ball screw design is more reliable, twice as powerful and offers instant response which makes them very user-friendly. How to describe the Lenco 12" x 9" Edgemount Trim Tab Kit with 12V LED Indicator Switch Kit? Edge Mount - Mount the actuator on the rear edge of a flat surface with a step height 4 inches lower than standard mounting - Trim option card makes the single actuator the largest...
Save $567 when you purchase the Lenco 12" x 9" Edgemount Trim Tab Kit with 12V LED Indicator Switch Kit for only $850 at NVN Marine! Expeditiwe the same day before 3 p.m. Edgemount Lenco 12" x 9" Trim Tab Kit with 12V LED Indicator Switch Kit Videos Edgemount Lenco 12" x 9" Trim Tab Kit with 12V LED Indicator Switch Kit Technical Specifications
Type: | Boat outfitter | Compensating Tabs |
---|---|
Seller: | Lenco Marine |
Weight: | 17.2 lbs |
Product brochure: | Download the PDF |
Shipping Weight: | 17.2 lbs |
---|---|
Box sizes: | 3.00 (h) x 5.00 (w) x 10.00 ( l) |
Cubic feet: | 150.0 |
Returnable: | Yes |
P65: | Yes |
For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.
- Lenco 12" x 9" Edge Mount Kit with 12V Standard Touch Switch
- Lenco 12" x 9" Edge Mount Kit without 12V Switch Kit
- Lenco 12" x 36" Super Heavy Duty Tab Kit without Switch Kit 12V
- Lenco 12" x 36" Standard Trim Kit without 12V Switch Kit
- Lenco 12" x 36" 24V Super Heavy Duty Trim Tab Kit without Switch Kit
- Lenco 12" x 30" Super Heavy Duty Tab Kit with Standard 12V Touch Switch
- Lenco 12" x 30" Super Heavy Duty Tab Kit without Switch Kit 12V