Lenco 17" x 12" Extreme Performance Trim Tab Kit without Switch Kit 12V Boat Outfitting

Extreme Performance 17" x 12" Trim Tab Kit Without Switch Kit - 12V Single Actuator Kit

Trim tab kits with Lenco Electric Extreme Duty polished blade operate quickly responding actuators for precise control. They are fully submersible and have German Plug & Play connections. The blades are electro-polished 10 gauge – 304 SS with 1" raised edges, an 85 degree interior taper and a 3/8" diameter hinge pin. Extreme Duty actuators with 3/8" stainless steel bolts. Kit is factory assembled with complete transom backplate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes.

Kit Contents:

2 of each of the stainless steel trim tab planes
2 of each actuator #15056-001XD for outdoor userême with 6" cable and Deutsch plugs
Kit is factory assembled with complete transom backplate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes.

The following to be provided by customer:

Mounting Hardware on boat
Actuator extension harnesses (2 for single actuator application or 4 for dual actuator application)
will be required. Order the lengths of your choice. See the Lenco
Accessories section.

Specifications:

Suggested boat length: 20' to 40'
Tab Length: 17"
Tab Width: 12"
Minimum Transom Height: 10.5"
Blades: 10 gauge stainless steel
Finish: Electropolished
Switch kit: sold separately
Rating: Power efficientrburant
Compliance: CE certified
Compatibility: Any boat
Switch required: 10222-211D, 15069-001 or 15070-001
Actuators: 12 volts

This product can expose you to chemicals including di(2-ethylhexyl phthalate (dehp), known to the State of California to cause cancer and birth defects.or other reproduction issues For more information, go to P65Warnings.ca.gov.

They are fully submersible and feature a plug-and-play Deutsch blade. is 10 gauge electropolished 304 stainless steel, with a 1 inch upward curved edge, 85 degree interior taper, 3/8...
PRODUCT ID: 29259
SKU: NVN-29259
br> CSKU: CWR-29259
REWRITE: 40370-lenco-17-x-12-extreme-duty-performance
MPN: 15045-101
UPC: 874847004671
ASIN: B00LAHAYDA
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Lenco 17" x 12" EXTREME DUTY PERFORMANCE TRIM TAB KIT WITHOUT SWITCH 12V
NAME_EX: LENCO 17" "Extreme Duty Performance Trim Tab Kit without Switch Kit 12V
TYPE: Boat Fitting | Trim Tabs
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Lenco Extreme Duty Performance Trim Tab Kit W /O Switch Kit 12V
Lenco 17" x 12" Extreme Performance Trim Tab Kit No Switch Kit 12V [15045-101]

Gtags:

Lenco

GSpecs:

Lenco 17" x 12" Extreme Performance Trim Tab Kit without Switch Kit 12V Product Description

17" x 12" Extreme Performance Trim Tab Kit without Switch Kit - 12V - Single Actuator Kit Lenco Electric Extreme Duty Polished Blade Trim Tab Kits feature fast-response actuators for precise control. They are fully submersible and have German Plug & Play connections. The blades are electro-polished 10 gauge – 304 SS with 1" raised edges, an 85 degree interior taper and a 3/8" diameter hinge pin. Extreme Duty actuators with 3/8" stainless steel bolts. Kit is factory assembled with complete transom backplate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes.

Kit Contents:

2 of eachone of the stainless steel trim tab planes
2 of each of the actuators #15056-001XD for extreme use with 6" cable and Deutsch plugs
The kit is factory assembled with a complete transom backplate and mechanical cable clamp, cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes.

The following items must be provided by the customer:

Boat mounting hardware
Actuator extension harnesses (2 for single actuator application or 4 for double application)
will be required. Order the lengths of your choice. See Lenco Accessories section.

Specifications:

Suggested boat length: 20' to 40'
Tab Length: 17"
Tab Width: 12"
Minimum Transom Height: 10.5"
Blades : Gauge stainless steel10
Finish: Electro-Polished
Switch kit: sold separately
Class: fuel efficient
Compliance: CE certified
Compatibility: Any boat
Required switch: 10222-211D, 15069-001 or 15070-001
Actuators: 12 volts

The product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), which is known to the State of California to cause cancer , birth defects or other reproductive problems. For more information,

They are fully submersible and feature a plug-and-play Deutsch connection. The blade is 10 gauge electropolished 304 stainless steel, with a 1 inch upward curved edge, 85 degree interior taper, 3/8...

Lenco 17" x 12" Extreme Duty Performance Trim Tab Kit Without Switch Kit 12V Products crelatedTecnoseal R1 Rudder Anode - Zinc - 1-7/8" diameter
Tecnoseal R2 Rudder Anode - Zinc - 2-13/16" diameter
Tecnoseal R3 Rudder Anode - Zinc - 3-3 /4" diameter
Tecnoseal R1AL rudder anode - Aluminum - 1-7/8" diameter
Tecnoseal R2AL rudder anode - Aluminum - 2-13/16" diameter
Anode Tecnoseal R3AL Rudder Anode - Aluminum - 3-3/4" diameter
Tecnoseal R1MG Rudder Anode - Magnesium - 1-7/8" Diameter
Tecnoseal R2MG Rudder Anode - Magnesium - 2-13 /16" Diameter
Tecnoseal R3MG Rudder Anode - Magnesium- 3-3/4" Diameter
Lenco LED Indicator Integrated Tactile Switch Kit with Pigtail for Single Actuator Systems

Frequently Asked Questions (FAQ) about Lenco 17" x 12" Extreme Performance Trim Tab Kit without 12V Switch Kit Who is Lenco Marine?
How to describe the kit performance trim tabextreme Lenco 17" x 12" without 12V switch kit?
Who is the Lenco Marine? Trim tabs make the most important difference in how your boat will sail and operate. Lenco trim tabs will make your sailing smoother, drier, faster and with increased safety, whether on a high performance family cruiser. or a small skiff. Lenco's ball screw design is more reliable, twice as powerful and offers instant response which makes them very user-friendly. How to describe the Lenco 17" x 12" Extreme Duty Performance Trim Tab Kit without 12V Switch Kit? fully submersible and featuring a Deutsch plug-and-play connection. The blade is electric.10 gauge chrome plated 304 stainless steel, with 1 inch upward curved edge, 85 degree inside taper, 3/8...

Save 863 $ when you purchase the Lenco Trim Tab Kit17" x 12" Extreme Duty Performance w/o 12V Switch Kitfor only $1,269 at NVN Marine! Free same day delivery before 3 p.m. Lenco 17" x 12" Extreme Duty Performance Trim Tab Kit Without Switch Kit 12V Technical Specifications

Type:	Boat Equipment \| Compensating Tabs
Seller:	Lenco Marine
Weight:	25.0 lbs
Product Brochure:	Download the PDF

Lenco 17" x 12" Extreme Duty Performance Trim Tab Kit without 12V Switch Kit User ReviewsLenco 17" x 12" Extreme DuTy Performance Drift Kit without Switch Kit 12V Shipping & Returns

Shipping Weight:	25.0 lbs
Box sizes:	7.00 (h) x 14.00 (w) x 25.00 (w)
Cubic feet:	2450.0
Returnable:	Yes
P65:	Yes

For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.