Lenco 4" x 12" Limited Space Compensation Tab Kit without Switch Kit 12V - Electropolished - Short Actuator Boat Outfitting
Limited Space Trim Tab Kit 12 Gauge Blades / 12 Volt Actuators Trim tabs make the most important difference in how your boat rides and operates. They are optional on some boats but should be as standard as power trim and tilt. Lenco compensators make your boating smoother, drier, faster and with increased safety, whether on a small skiff or a mega-yacht. Lenco's ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly compared to conventional hydraulic systems. We also like to be oil-free and environmentally conscious. Lenco Electric space limited trim tab kits are ideal for boats fitted with a swim platform and/or ladder. They can be installed on crossbars with a limited mounting area. Blades are 12 gauge - 304 SS with the front of the blade bent to provide a smooth trailing edge and a 1/8" diameter hinge pin. Fast-response electric actuators for precise control. All units have Plug and Play connections and are fully submersible.
Lenco 15088101 Attributes- Tab Size: 4 inches long x 12 inches wide
- Material: Stainless Steel
- Fast Response Electric Actuators
- Fully Submersible Actuators
- Plug and Play Waterproof Connectors li>
- Switch Kit Sold Separately
- 3 Year Limited Warranty
- Trim_Tab_Manual_TCHDAT.pdf
- size_diagram_limited_space_TCHDAT.pdf
4" x 12" Limited Space Compensation Tab Kit No Kit interrupteur - 12V - Electropolished - Short Actuator
Lenco Electric Limited Space Trim Tab kits are ideal for boats fitted with a swim platform and/or ladder. They can be installed on crossbars with a limited mounting area. Blades are 12 gauge - 304 SS with the front of the blade bent to provide a smooth trailing edge and a 1/8" diameter hinge pin. Fast-response electric action triggers for precise control. All units feature plug and play connections and are fully submersible.
Kit Contents:
- 2 each of 304 stainless steel trim tabs 12 gauge blades
- 2 each of XD Actuator #15057-001 with 6' cable and Deutsch plugs
- 2 each of Actuator Extension Wire Harnesses #15057-001 ° 30133-103 of 20'
- 2 upper mounting brackets #15085-001 (116) with gasket
- 1 each of user manualsLenco sation and installation
- All necessary stainless steel mounting hardware
Specifications:
- Suggested boat length: 14' to 25'
- Tab length: 4"
- Tab width: 12"
- Minimum height transom height: 13"
- Blades: 12 gauge stainless steel
- Finish: Electropolished
- Switch kit: sold separately
- Class: fuel efficient
- Compliance: CE certified
- Compatibility: any boat
- Actuators: 12 volts
This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), which is known to the State of California to cause cancer, birth defects, or other reproduction problems For more information, go to P65Warnings.ca.gov.
This unique design gives you every advantage.s standard labels in an ultra-compact design. The folded edge provides protection when boarding. The blade is laser cut 12# electro-polished 304 stainless steel. The rear edge is bent for security and welded to the bottom mounting bracket and 1/8 inch diameter hinge pin. High strength, corrosion resistant top mounting bracket with mechanical gland seal.
PRODUCT ID: 50939
SKU: NVN-50939
CSKU: CWR-50939
REWRITE : 62050-lenco-4- Limited Space Trim x-12
MPN: 15088-101
UPC: 874847005739
ASIN:
WSKU: LEN15088101
SSKU: LEN-15088-101
br>KSKU: LEN15088101
GSKU:
MSKU:
LSKU: 622-15088101
NAME: Lenco 4" x 12" Limited Space Tab Kit without 12V Switch Kit - Electropolished - Short Actuator
NAME_EX: LENCO 4"s 12V switch kit - Electro-Polished - Short actuator
TYPE: Boat fitting | Trim Tabs
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
LENCO LIMITED SPACE TRIM TAB KIT, Trim Tab Kit, 4" ">
GSpecs:
Lenco 4" x 12" Limited Space Compensating Tab Kit without 12V Switch Kit - Electro Polished - Short Actuator Product Description
Limited Space Compensating Tab Kit 12 Gauge Blades / 12 Volt Actuators Trim tabs make the most important difference in how your boat rides and operates. They are optional on some boats but should be as standard as power trim and tilt. Lenco compensators make your boating smoother, drier, faster and with increased safety, whether on a small skiff or a mega-yacht. Lenco's ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly compared to conventional hydraulic systems. We also like to be oil-free and environmentally conscious. Lenco Elec limited space trim tab kitstric are ideal for boats equipped with a swim platform and/or ladder. They can be installed on crossbars with a limited mounting area. Blades are 12 gauge - 304 SS with the blade front bent to provide a smooth trailing edge and a 1/8" spindle diameter. Fast-response electric actuators for precise control. All units feature connections Plug and Play and are fully submersible.
Attributes Lenco 15088101- Tab Size: 4 in. x 12 in length Width in inches
- Material: Stainless Steel
- Fast-response electric actuators
- Fully submersible actuators
- Plug and Play waterproof connectors
- Switch kit sold separately
- Limited warranty 3 years
- li>
- Trim_Tab_Manual_TCHDAT.pdf
- size_diagram_limited_space_TCHDAT.pdf
Trimming Tab Kit for 4" x 12" Limited Space Without Switch Kit - 12V - Electropolished - Short Actuator
Lenco Electric Limited Space Compensation Tab Kits are ideal for fitted boats a swimming platform and/or a ladder. They can be installed on crossmembers which have a limited mounting area. Blades are 12 gauge - 304 SS with the front of the blade bent to provide a smooth trailing edge and a 1/8" diameter hinge pin. Fast-response electric actuators for precise control. All units have Plug and Play connections and are fully submersible.
Kit Contents:
- 2 304 gauge stainless steel trim tab blades 12
- 2 of each type #15057-001 XD Actuatorwith 6' cable and Deutsch plugs
- 2 from each of the 20' Actuator Extension Wire Harness #30133-103
- 2 from each of the mounting brackets Uppers #15085-001 (116) with gland gasket
- 1 from each Lenco Owner's/Installation Manual
- All necessary stainless steel mounting hardware
Specifications:
- Suggested boat length: 14' to 25'
- Deck length tongue: 4"
- Tab width: 12"
- Minimum transom height: 13"
- Blades: 12 gauge stainless steel
- Finish: Electropolished
- Switch kit: Sold Sepa
- Class: fuel efficient
- Conformity: CE certified
- Compatibility: Any boat
- Actuators: 12 volts
This product can expose you to chemicals, including phthalate di(2-ethylhexyl) (dehp), cknown to the State of California to cause cancer, birth defects, or other harm. reproductive harm. For more information,
This unique design gives you all the benefits of standard labels in an ultra-compact design. The folded edge provides protection when boarding. The blade is laser cut 12# electro-polished 304 stainless steel. The rear edge is bent for security and welded to the bottom mounting bracket and 1/8 inch diameter hinge pin. High strength, corrosion resistant top mounting bracket with mechanical gland seal.
Lenco 4" x 12" Limited Space Trim Tab Kit without 12V Switch Kit - Electro Polished - Short Actuator Related ProductsLenco Upper MounMounting Bracket with Gland Gasket (2008- present)
Lenco compact top mounting bracket - 2 screws 1 wire
Lenco Standard Top Mounting Bracket - 3 Screws 1 Wire
Lenco Standard Bottom Mounting Bracket - 3 Bolt
Lenco Carling Double Rocker Switch Kit
Tecnoseal R1 Rudder Anode - Zinc - 1-7/8" diameter
Tecnoseal R2 rudder anode - Zinc - 2-13/16" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" diameter
/>Tecnoseal R1AL Rudder Anode - Aluminum - 1-7/8" Diameter
Tecnoseal R2AL Rudder Anode - Aluminum - 2-13/16" Diameter
Questions Frequently Asked Questions (FAQ) about Lenco 4" x 12" Limited Space Trim Tab Kit without 12V Switch Kit - Electro Polished - Short Actuator Who is the Lenco Marine
How to describe the kit? Lenco 4" x 12" Limited Space Trim Tabs Without Switch Kit 12V - Electro Polished - Short Actuator?
What is the operating voltage of the product?
What is is the material of the Lenco 4" x 12"Limited Space Trim Tab Kit without 12V Switch Kit - Electro-Polished - Short Actuator?
What is the weight of the product?
What is the size?
What is the construction of the product?
What is the finish of the product?
What is the type of actuator?
Who is Lenco Marine? Trim tabs make the most important difference in how your boat will sail and operate. Lenco compensators will make your boating experience smoother, drier, faster and with increased safety, whether on a high-performance family cruiser or a small skiff. Lenco's ball screw design is more reliable, twice as powerful and features an instant response that makes them very user-friendly. How to describe the Lenco 4" x 12" Limited Space Compensation Tab Kit without 12V Switch Kit - Electro Polished - Short Actuator? This unique design offers you all the advantages of standard labels ins an ultra compact design. The folded edge provides protection when boarding. The blade is laser cut 12# electro-polished 304 stainless steel. The back edge is bent for safety and welded to the bottom mounting bracket and hinge pin with a diameter of 1/8 inch. High-strength, corrosion-resistant top mounting bracket with mechanical gland seal.
- Ideal for boats equipped with a swim platform and/or ladder.
- Lenco short actuator electric trim tab kits are electro polished to a high gloss finish.
- The 12V system works with all types of boats including aluminum, steel or fiberglass.
- Easily install tab trims to your boat without having to drill into the hull.
- Get a perfectly clean installation with these electro-polished trim tabs.
- The short actuator is perfectt for boats with limited transom space.
When you need a tab, but have limited space, the Lenco Electro-Polish is the perfect solution. It has all the benefits of a standard tab in an ultra-compact design. These kits are upgraded with 11 gauge stainless steel blades. Boat lengths can be as long as 12".
What is the operating voltage of the product? 12- Ideal for boats equipped with a swim platform and/or ladder.
- Lenco short actuator The electric trim tab kits are electro-polished to a high gloss finish.
- The 12V system works with all types of boats, including aluminum, steel or fiberglass.
- Easily install trim tabs to your boat without having to drill into the hull.
- Get a perfectly clean installation with these trim tabss electro-polished.
- The short actuator is perfect for boats with limited transom space.
- Compact design that fits behind ladders.
- Ultra-sharp blades for a perfect finish.
- Updated with 11 gauge stainless steel blades for the best performance.
- Ultra compact design that fits fits behind ladders
- 11 gauge stainless steel blades for added durability
- Updated model for better fit
Save $397 on purchaseat the Lenco 4" x 12" Limited Space Decorative Tab Kit No Switch Kit 12V - Electro Polished - Short Actuator for only $505 from NVN Marine! Same day dispatch before 3 p.m. Lenco 4" x 12" Space Limited Trim Kit Without Switch Kit 12V - Electro Polished - Short Actuator Technical Specifications
| Type: | Boat fittings | Compensating Tabs |
|---|---|
| Seller: | Lenco Marine |
| Weight: | 13.2 lbs |
| Actuator Type: | Electro-mechanical |
| Construction: | Stainless steel |
| Product Brochure: | Download PDF |
| Shipping Weight: | 13.2 lbs |
|---|---|
| Box sizes: | 7.00 (h) x 7.00 (w) x 13.00 (w) |
| Cubic feet: | 637.0 |
| Returnable: | Yes |
| P65: | Yes |
- Lenco 4" x 12" Limited Space Compensation Tab Kit Without Switch Kit 12V - Standard Finish - Short Actuator
- Lenco 4" x 12" Replacement Blade for Limited Space - Standard Finish
- Lenco 4" x 12" replacement blade for limited space - Electro-polished finish
- Lenco actuator 4 1/4 stroke XD 5/16 x 3/8 12v
- Lenco 36" Power Pigtail f/AUTO GLIDE control box
- Lenco 25" x 14" High Performance Tab Kit without Switch Kit 12V
- Lenco 24" x 14" Extreme Performance Trim Tab Kit Without Switch
