Lenco 9" x 12" Edge Mount Kit with Standard Tactile Switch Kit Boat Outfitting

Edge Mount Trim Tab Kit with Standard Tactile Switch Kit

Lenco Electric Edge Mount Trim Tab Kits make sailing your boat smoother, drier, faster and with increased safety, whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly compared to conventional hydraulic systems. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount to the trailing edge of the aircraft, requiring 4" (10.16 cm) less transom height than standard Lenco mount trim tabs.

Suggested Boat Length:16'-25'
L" x W":9" x 12"
Hinge Height: 2"
Height mtransom minimum: 13.5"

Kit Contents

2 12 gauge stainless steel trim tab blades
2 each of actuator #15054-001 with 6' cables and Deutsch plugs
2 each of 20' actuator #30133-103 extension wire harnesses
2 upper mounting brackets no. 15085-001 (116) with gasket
2 lower mounting brackets no. 50014-001 (119)
mounting brackets
1 Lenco user/installation manual
All necessary stainless steel mounting hardware

Specifications:

Blades: 12 gauge stainless steel
Finish:Smooth
Class: Fuel efficient
Compliance: CE certified
Compatibility: Any boat

Standard touch switch kit

With integratedD Retractor for Single Actuator / 12 Volt Systems

Lenco standard compensation tab tactile switch kits complete your compensation tab system with completely waterproof, maintenance-free, easy-to-install tactile switches. The switch itself is completely waterproof and has an overmolded connector to eliminate water intrusion. The standard tactile switch is built to the same exacting standards.rds when the indicator changes.

Kit Contents

Keypad
Control box
36" electric pigtail

This product can expose you to chemicals including di(2-ethylhexyl phthalate (dehp), known listed by the State of California as causing cancer, birth defects or others reproductive problems. For more information, visit. P65Warnings.ca.gov.

Lenco Marine x 12-inch Standard Decorative Parts Kit with Dual 9-inch Rocker Switch 15101-104 Lenco's quick-response electric actuator can be completely submerged in water and. has plug-and-play waterproof function
PRODUCT ID: 56425
SKU: NVN-56425
CSKU: CWR-56425
REWRITE: 67536-lenco-9-x-12-edge-. mounting kit
MPN: TT9X12E
UPC: 649664625732
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Lenco 9" x 12" Edge Mount Kit with Standard Touch Switch Kit
NAME_EX: LENCO 9" X 12" EDGE MOUNT KIT with Standard Touch Switch
PTITLE: Lenco Kit 9" x 12" Edge Mount with Standard Tactile Switch Kit
TYPE: Boat Equipment | Trim Tabs
SELLER: Lenco Marine
VEHICLES AND PARTS> PARTS AND ACCESSORIESVEHICLES> WATERCRAFT PARTS & ACCESSORIES Lenco Marine TT9X12E 9 x 12 Onboard Mount Kit with Standard Touch Switch Kit
Amazon Category :
Gtags:

Lenco

GSpecs:

Lenco 9" x 12" Edge Mount Kit with Standard Tactile Switch Kit Product Description Edge Mount Adjustment Tab Kit with Standard Tactile Switch Kit

Lenco electric onboard mounting adjustment tab kits make your navigation smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly compared to conventional hydraulic systems. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount to the trailing edge of the aircraft, requiring 4" (10.16 cm) less transom height than standard Lenco mount trim tabs.

Suggested boat length:16'-25'
L" x W": 9" x 12"
Hinge Height: 2"
Minimum Board Height Rear: 13.5"

Kit Contents

2 12 gauge stainless steel trim tab blades
2 each of #150 54-001 Actuator with 6' wires and Deutsch plugs
2 each of 20' Actuator Extension Wire Harnesses #30133 -103
2 each of #15085-001 (116) upper mounting brackets with gasket
2 each of lower mounting brackets #50014-001 (119)
1 each of Lenco Lower Mounting Brackets / Installation Manual
All stainless steel mounting hardware needed

Specifications:

Blades: 12 gauge stainless steel
Finish: Smooth
Class: Fuel efficient
>Compliance: CE certified
Compatibility: Allboat

Standard touch switch kit

With integrated retractor for single actuator systems / 12 volts

Standard Lenco trim tab Tactile switch kits complete your trim tab system with completely waterproof, maintenance-free and easy to install tactile switches. The switch itself is completely waterproof and has an overmolded connector to eliminate water intrusion. The standard tactile switch is built to the same exacting standards as indicator switches.

Kit Contents

Touch Keypad
Control Box
36" Power Pigtail

This product may expose you to hazardous chemicals, including di(2-ethylhexyl)phthalate (dehp), known to the State of California to cause cancer, birth defects, or other reproductive harmn. For more information,

Lenco Marine x. 12" Standard Decorative Parts Kit with 9" Dual Rocker Switch 15101-104. Lenco's fast-response electric actuator can be completely submerged in water and features a plug-and-play waterproof feature.

Lenco. 9" x 12" Edge Mount Kit with Standard Touch Switch Kit Related ProductsLenco Top Mount Bracket with Gland Gasket (2008-Present)
Lenco Compact Top Mount Bracket - 2 Screws 1 Wire
br />Lenco Standard Top Mount Bracket - 3 Screws 1 Wire
Lenco Standard Bottom Mount Bracket - 3 Bolts
Tecnoseal R1 Rudder Anode - Zinc - 1-7/8" Diameter
Tecnoseal R2 rudder anode - Zinc - 2-13/16" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" diameter
Tecnoseal R1AL rudder anode - Aluminum - 1- 7/8" diameter
T rudder anodeecnoseal R2AL - Aluminum - 2-13/16" Diameter
Tecnoseal R3AL Rudder Anode - Aluminum - 3-3/4" Diameter

Frequently Asked Questions (FAQ) About Lenco 9" x 12" Onboard Mount Kit with Standard Touch Switch Kit Who is Lenco Marine? How to Describe Lenco 9 Onboard Mount Kit " x 12" with standard touch switch kit?
What is the construction of the product?
Who is Lenco Marine? Trim tabs make the most important difference in how your boat will sail and operate. Lenco trim tabs will make your boating experience smoother, drier, faster and with increased safety, whether on a high-performance boat, family cruiser or small skiff. Lenco's ball screw design is more reliable, twice as powerful and features an instant response that makes them very user-friendly. How to describe the m kitLenco 9" x 12" onboard mounting with standard touch switch kit? Lenco Marine12 inch standard decorative parts kit with dual 9 inch rocker switch 15101-104. Lenco's fast-response electric actuator can be completely submerged in water and has a plug-and-play waterproof feature. What is the construction of the product? Stainless Steel

Save $488 when you purchase the Lenco 9" x 12" Edge Mount Kit with Hardware Kit standard touch switchfor only $732 from NVN Marine! Same day dispatch before 3 p.m. Lenco 9" x 12" Edge Mount Kit with Standard Touch Switch Kit Technical Specifications

Type:	Boat Equipment \| Cutting tabs
Supplier:	Lenco Marine
Weight:	18.7 lbs
Construction:	Steel stainlessable

Lenco 9" x 12" Edge Mount Kit with Standard Tactile Switch Kit User ReviewsLenco 9" x 12" Edge Mount Kit with standard touch switch kit Shipping & Returns

Shipping Weight:	18.7 lbs
Box sizes:	3.00 (h) x 5.00 (w) x 9.00 (w)
Cubic feet:	135.0
Returnable:	Yes
P65:	Yes