Lenco 9" x 36" Standard Trim Kit without 12V Switch Kit Boat Outfitting

9" x 36" Standard Mount Trim Tab Kit without Switch Kit - 12V

Lenco Electric Standard Mount Trim Tab Kits make your boat navigation smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features instant response, making them very user friendly compared to conventional hydraulic systems.

Lenco quick response electric actuators are fully submersible and all waterproof plug & play. German connections. The Trim Tab blades are 12 gauge - 304 SS with a 5/8" flared trailing edge and a 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.

Kit Contents:

2 steel trim tab blades 12 gauge stainless steel of each
2 each of Actuator #15054-001 with 6' cables and Deutsch plugs
2 each of 20' Actuator Extension Wire Harness # 30133-103
2 each of upper mounting brackets #15085-001 (116) with cable gland
2 lower mounting brackets #50014-001 (119)
1 each of Lenco user and installation manuals
All necessary mounting hardware made of stainless steel

Specifications:

Suggested boat length: 34' to 65'
Tab length: 9"
Tab width: 36 "
Hinge Height: 1"
Minimum Transom Height: 14"
Blades: 12 Gauge Stainless Steel
Finish: Smooth
Switch kit: sold separately
Class: Fuel efficient
Conformity: CE certified
Compatibility: any boat
Actuators: 12 volts

This product can expose you to chemicals, including di(2-ethylhexyl) phthalate (dehp), known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to. P65Warnings.ca.gov.

Fast-response electric actuator for precise control. For available options, see Change Selection Trim tabs operate independently of each other to provide the best choice.
PRODUCT ID: 29301
SKU: NVN-29301
CSKU: CWR-29301
REWRITE: 40412-lenco-9-x-36-standard-trim-tab
MPN: 15005- 101
UPC: 00874847004268
ASIN:
WSKU: LEN15005101
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Lenco 9" x 36" Standard Trim Kit without 12V Switch Kit
NAME_EX: LENCO TRIM TAB KIT 9" Trim Tabs
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES Lenco 9 " x Standard tractor 36"im Kit Tab without 12V switch kit

Gtags:

Lenco

GSpecs:

Lenco 9" x 36" Standard Mount Trim Tab Kit without Switch Kit 12V Product Description

9" x 36" Standard Mount Trim Tab Kit without Switch Kit - 12V

Lenco Electric Standard-fit trim tab kits make your boating smoother, drier, faster and with increased safety, whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features instant response, making them very user friendly compared to conventional hydraulic systems.

Contkit enu:

2 each of 12 gauge stainless steel trim tab blades
2 each of actuators #15054-001 with cables 6' and Deutsch plugs
2 each actuator #30133-103, 20' extension connecting wire harnesses
2 top mounting brackets #15085-001 (116) with gasket
2 lower mounting brackets #50014-001 (119)
1 Lenco user/installation manual
All stainless steel mounting hardware required

Specifications:

Suggested boat length: 34' to 65'
Tab Length: 9"
Tab Width: 36"
Hinge Height: 1"
Minimum Height of transom: 14"
Blades: 12 gauge stainless steel
Finish: smooth
Switch kit: sold separately
Class: fuel efficient
Compliance: CE certified
Compatibility: Any boat
Actuators: 12 volts

This product can expose you to chemicals , including di(2-ethylhexyl) phthalate (dehp), which is known to the State of California to cause cancer, birth defects, or other reproductive harm. harm. For more information,

Quick response electric actuator for precise control. For available options, see Change Selection. The trim tabs operate independently of each other to provide the best choice.

Lenco 9" x 36" Standard Trim Kit without 12V Switch Kit Related ProductsLenco Top Mount Bracket with Gland Gasket (2008-Present)
Compact Top Mount Bracket Lenco - 2 screws 1 wire
Standard top mounting bracket Lenco - 3 screws 1 wire
Standard bottom mounting bracketLenco - 3 bolts
Tecnoseal R1 Rudder Anode - Zinc - 1-7/8" Diameter
Tecnoseal R2 Rudder Anode - Zinc - 2-13/16" Diameter
Anode Tecnoseal R3 rudder - Zinc - 3-3/4" diameter
Tecnoseal R4 rudder anode - Zinc - 5" diameter x 5/8" thick
Tecnoseal R1AL rudder anode - Aluminum - 1-7/8" diameter
Tecnoseal R2AL Rudder Anode - Aluminum - 2-13/16" diameter

Frequently Asked Questions Questions (FAQ) about the standard Lenco 9" x 36" trim tab kit without Switch Kit 12V Who is the Lenco Marine?
How to describe the Lenco Standard Trim Tab Kit 9" x 36" without Switch Kit 12V? is Lenco Marine? Trim tabs make the most important difference in how your boat will sail and operate. Lenco trim tabs will make your boat ride smoother, drier, faster and with increased safety, whatever it may be.r a high-performance family cruiser or small skiff. Lenco's ball screw design is more reliable, twice as powerful and features an instant response that makes them very user-friendly. How to describe the Lenco 9" x 36" Standard Trim Tab Kit without 12V Switch Kit? Fast-response electric actuator for precise control. For available options, see Change Selection. The trim tabs operate independently of each other to provide the best choice.

Lenco ball screws are made of stainless steel and have a zero-backlash design.
Lenco electric trim tabs are designed for boats with 12V DC power, and the They are available in two different sizes.
The Lenco Standard Mount Trim Tab Kit is perfect for small skiffs or large yachts, and it includes the following:
(2) 12 volt electric trim Tabs
(2) Pivots
(1) Control box
(4) H

Lenco Ball screws are designed to support heavy loads with minimal energy consumption.
Lenco electric trim tab kits are perfect for those who want a high quality product at an affordable price.
These kits come with everything you need to install them on your boat.

The original electric boat trim is still the best! Lenco's Trim Tab series is the best-selling version they make. Ideal for the most common style boats, from center consoles to fishing boats, you can customize your boat with Lenco's standard mount daggerboard kit.

Save $530 when you purchase the Lenco 9" x 36" Standard Trim Kit without 12V Switch Kit for only $747from NVN Marine! Same day dispatch before 3 p.m. KitLenco 9" x 36" Standard Trim Kit without 12V Switch Kit Technical Specifications

Type:	Boat Equipment \| Compensating Tabs
Seller:	Lenco Marine
Weight:	34.3 lbs
Product Brochure:	Download the PDF

Lenco Standard Trim Kit 9" x 36" without 12V Switch Kit User ReviewsLenco Standard Tab Kit 9" x 36" without 12V switch kit Shipping & Returns

Shipping Weight:	34.3 lbs
Box sizes:	6.00 (h) x 13.00 (w) x 44.00 (w)
Cubic feet:	3432.0
Returnable:	Yes
P65:	Yes