Lenco Auto Glide Boat Leveling System with Dual Actuator Tab Systems Boat Outfitting

A true automatic boat control / trim tab control system that actually works - completely and automatically!

The Auto Glide system controls your trim tabs from the time you leave your dock until you return at home!

Auto Glide uses engine data and GPS data (depending on your installation method) to drive your boat to the most efficient running angle by adjusting your flaps Lenco compensators according to your needs. This optimal running angle is determined during the setup process after installing your Auto Glide system.

Imagine your boat's running angle is measured 25 times per second and that data is used by the new Auto Glide control. box for:

Automatically place your boat in the most efficient running angle.
Reduce the amount of bow lift on your boatduring holeshot mode.
Eliminate bow porpoising (bow bounce).
Keep your boat level at all times.

These actions will result in a smoother ride and the best possible fuel economy.

The Auto Glide has 3 automatic operating modes, 4 automatic settings and 2 manual operating modes. Although you will probably keep your Auto Glide in automatic mode, you can immediately switch to manual mode by simply pressing one of the 4 up/down buttons on the keypad.

The main components are the Auto Glide key. Pad, the Auto Glide control box, the main control box harness and various cables. These cables connect the Auto Glide system to your engine(s), GPS unit, network, and/or a standalone GPS antenna/receiver.

Boat must be equipped with the Lenco system Dual Trim Tab with Lenco Electric. Actuators. It is a MUST in all applications.

For aftermarket systems:

The Lenco Glide system will work on ALL boats with ALL engines. GPS data is used to provide data to the control box. An optional connection to the NMEA 2000 network is included. For OEM system:

For OEM system:

Anus connectionOG systems are available.
Connection to CANbus based motors is available. See list below.
Boat must have a NMEA 2000 GPS network or NMEA 2000 antenna receiver.
NMEA 0183 will work, but will have slower signal response. Lenco offers an optional NMEA 2000 GPS antenna receiver and stainless steel mounting bracket.

Kit contains
1 30254 -001D Auto Glide Keypad Control
1 30256-001 Auto Glide Control Boxfor dual actuator
1 30247-001 Auto-slide control box harness for dual actuator
1 30259-001D CAN bus #1 NMEA2000 cable - 2.5'
1 30262-001D Network adapter cable GPS/NMEA 2000 #2 for CAN bus - 2.5'
1 30266-001 NMEA 2000 GPS antenna only
3 30267-001D T-connector only
2 30268-001D Termination resistor - Female
1 30268-002D Terminating Resistor - Male
1 30281-001D Power Cable - 2.5' NMEA 2000 Network

Available for these CANbus based motors:

NMEA2000 Engines

Yamaha (Command Link Plus requires NMEA 2000 / Yamaha Gateway P/N: 6Y98A2D00000)
Evinrude
Honda
Suzuki
Volvo Penta (non-EVC engines) (with a Volvo NMEA2000 gateway - Volvo P/N 3889757)

J1939 Engines

Volvo Penta (EVC Engines)
Yanmar
Caterpillar
Cummins
DetRoit Diesel
John Deere
Steyr

SmartCraft Engines

Mercure - Verado
Mercure - Optimax with SmartCraft calculator
Mercruiser with SmartCraft calculator
Cummins/Mercruiser with SmartCraft Calculator

This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to P65Warnings.ca.gov.

Lenco Auto GlIDE Trim Tab Kit (15501-101) For Lenco Marine Dual Actuators. leader in the marine and shipbuilding industry, manufacturing not only decorative sheets, but also...
PRODUCT ID: 50943
SKU: NVN-50943
CSKU: CWR-50943
REWRITE: 62054-lenco-auto-glide-boat-leveling-system-f
MPN: 15501-101
UPC: 874847006729
ASIN:
WSKU: LEN15501101
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Lenco Auto Glide Boat Leveling System for dual actuator tab systems
EX_NAME: LENCO F/DUAL ACTUATOR AUTO GLIDE BOAT LEVELING SYSTEM
PTITRE: Lenco Auto Glide Boat Leveling System for Dual Actuator Tab Systems
TYPE: Equipment of boat | Trim Tabs
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES

Trim Tabs Lenco Auto Glide boat leveling for dual actuator tab systems

Gtags:

GSpecs:

Lenco Auto Glide Boat Leveling System with Dual Actuator Tab Systems Product Description A true automatic boat control/trim tab control system that actually works - completely and automatically!

The Auto Glide System controls your trim tabs from the time you leave your dock until you get home!

Auto Glide uses engine data and GPS data (depending on your method of d 'installation) to drive your boat at the most efficient running angle by adjusting your Lenco trim tabs as needed. This optimal running angle is determined during the setup process after installing your Auto Glide system.

Imagine your boat's running angle is measured 25 times per second and that data is used by the new Auto Glide control. box for:

Automatically placeyour boat in the most efficient running angle.
Reduce the amount of bow lift on your boat during holeshot mode.
Eliminate bow porpoising (bow bounce).
Keep your boat level at all times.

These actions will result in a smoother ride and the best fuel efficiency possible.

The Auto Glide has 3 automatic operating modes, 4 automatic settings modes and 2 operating modes manuals. Although you will probably keep your Auto Glide in automatic mode, you can immediately switch to manual mode by simply pressing one of the 4 up/down buttons on the keypad.

The main components are the Auto Glide key. Pad, the Auto Glide control box, the main control box harness and various cables. These cables connect the Auto Glide system to your engine(s), GPS unit, network andt/or a standalone GPS antenna/receiver.

The boat must be equipped with the Lenco Dual Trim Tab system with Lenco Electric. Actuators. It is a MUST in all applications.

For aftermarket systems:

The Lenco Glide system will work on ALL boats with ALL engines. GPS data is used to provide data to the control box. Optional connection to NMEA 2000 network is included.For OEM system:

For OEM system:

Connection to analog systems is available.
Connection to CANbus based motors is available. See list below.
Boat must have a NMEA 2000 GPS network or NMEA 2000 antenna receiver.
NMEA 0183 will work, but will have slower signal response. Lenco offers an optional NMEA 2000 GPS antenna receiver and stainless steel mounting bracket.

Kit Contains
1 30254-001D Auto Glide Keypad Control
1 30256-001 Auto Glide Control Box for Dual Actuator
1 30247-001 Control Box Harness automatic sliding for double actuator
1 30259-001D CAN bus no. 1 NMEA2000 cable - 2.5'
1 30262-001D GPS/NMEA 2000 network adapter cable no. 2 for CAN bus - 2.5'
1 30266-001 NMEA 2000 GPS Antenna only
3 30267-001D T-connector only
2 30268-001D Terminating Resistor - Female
1 30268-002D Terminating Resistor - Male
1 30281-001D Power Cable - NMEA 2000 Network 2.5'

Available for these CANbus based motors:

NMEA2000 motors

b>

Yamaha (Command Link Plus requires NMEA 2000 / Yamaha Gateway P/N: 6Y98A2D00000 )
Evinrude
Honda
Suzuki
Volvo Penta (non EVC Engines) (With a Volvo NMEA2000 gateway - Volvo P/N 3889757)

Motorrs J1939

Volvo Penta (EVC Engines)
Yanmar
Caterpillar
Cummins
Detroit Diesel
John Deere
Steyr

SmartCraft Engines

Mercury - Verado
Mercury - Optimax with SmartCraft ECU
Mercruiser with ECU SmartCraft
Cummins/Mercruiser with SmartCraft ECU

This product can expose you to chemicals, including phthalate di(2-ethylhexyl) (dehp), known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.

Lenco's Auto Glide Trim Tab Kit (15501-101). For double actuators. Lenco Marine is a true leader in the marine and shipbuilding industry, manufacturing not only decorative sheets, but also...

System ofLenco Auto Glide boat leveling for dual actuator tab systems Related ProductsLenco Auto Glide Adapter Cable for /SmartCraft / Mercury - 2.5'
Lenco Auto Glide f/Command Link / Yamaha Adapter Cable - 2.5'
br />Lenco Auto Glide f/J1939 adapter cable - 2.5'
Lenco Auto Glide CANbus #1 NMEA2000 adapter cable - 2.5'
Lenco Auto Glide CANbus #2 GPS/NMEA 2000 adapter cable - 2.5'
Extension cable for Lenco Auto Glide adapter - 10'
Extension cable for Lenco Auto Glide adapter - 20'
Extension cable for Lenco Auto Glide adapter - 30'
Extension cable for Lenco Auto Glide adapter - 40'
Extension cable for Lenco Auto Glide adapter - 50'

Frequently asked questions (FAQ) about Lenco Auto Glide Boat Leveling System f/Dual Actuator Tab Systems Who is Lenco Marine? How to Describe Lenco Auto Glide Boat Leveling System f/Dual Actuator Tab Systemse double actuator tabs?
Who is Lenco Marine? Trim tabs make the most important difference in how your boat will sail and operate. Lenco compensators will make your boating experience smoother, drier, faster and with increased safety, whether on a high-performance family cruiser or a small skiff. Lenco's ball screw design is more reliable, twice as powerful and offers instant response which makes them very user-friendly. How to describe the Lenco Auto Glide Boat Leveling System f/Dual Actuator Tab Systems? Lenco Trim Auto Glide Tab Kit (15501-101). For double actuators. Lenco Marine is a true leader in the marine and shipbuilding industry, manufacturing not only decorative sheets, but also...

The Auto Glide system is the only controller trim tab that operates automatically. Finishedmanual adjustments!
The Auto Glide system is also the only trim tab controller that operates on engine data. No more guesswork!

The Auto Glide system controls your trim tabs from the moment you leave your dock until you return home!
Auto Glide uses engine data to automatically adjust your trim tabs for optimal performance, eliminating the need for manual adjustment.
A simple, high-tech solution that will save you time and effort. money.

Save $1,230 when you purchase the Lenco Auto Glide Boat Leveling System with Tab Systems dual actuatorfor only $1,719 from NVN Marine! Free same day delivery before 3 p.m. Lenco Auto Glide Boat Leveling System with Dual Actuator Tab Systems Videos Leveling SystemLenco Auto Glide boat fitting with dual actuator tab systems Technical specifications

Type:	Boat fittings \| Compensating Tabs
Seller:	Lenco Marine

The Auto Glide nco Boat Leveling System with Dual Actuator Tab Systems User Reviews Lenco Auto Glide Boat Leveling System with Dual Actuator Tab Systems Shipping & Returns

For detailed shipping policy , please review our shipping policy and you can find our return and refund policy here.