Lewmar H2G windlass 12v 8MM(5/16) Gypsy Anchoring & Docking

The latest generation of Lewmar's "H Series" horizontal windlasses, the H2 and H3 windlasses are designed for boats from 9 m (30 feet) to 15 m (50 feet).

The contactor is integrated into the bridge. unit. This saves valuable installation time because it reduces the number of components in the system. Additionally, the contactor is protected.

This has now been combined with a sleek, discreet design that takes up the minimum amount of valuable front deck area.

The electro-polished stainless steel rod management system will handle both rope and chain. Dual steering operation gives full control when ascending and descending.

Kits include: Integrated dual direction contactor, circuit breaker and toggle switch for 5/16" G4 string and 9/16-5/8" line

Quick and easy 1-piece installation
Maximum pull of 1433 lbs
Hori worm gear motorRobust zontal for reliable performance
Built-in contactor protected by main cable case when saving installation
Sealed weatherproof unit requires minimal maintenance
Main housing in aluminum and composite for reduced weight.
Stainless steel warping drum with unique "Wear and Abrasion Reduction Pattern" finish

What size windlass would fit best fit your boat?
If you have a 10 m (33 ft) boat, a 270 kg (600 lb) pull windlass will generally be selected. The rule for checking your windlass selection is to add the total weight of the chain and the weight of the anchor. The rope is very light and does not affect the actual lifting performance of the windlass, but can be taken into account. For safe navigation in all types of conditions and maritime areas, Lewmar recommends that you multiplyby 4 the total weight of your anchor and your chain. This number should be less than the maximum pull of the windlass you have selected. If your results are equal to or greater than the maximum pull, select the next largest windlass. The windlass does not store the anchor mounted in the locker. Gravity stores the bike in the locker. There should be a free and unobstructed area under the hawsehole for the incoming traveler to lie down on; otherwise, the rod will get stuck. Your windlass is a recovery device; the windlass picks up the anchor and sets off. A windlass is not a high load carrying device. When at anchor, your mount should be secured to a cleat or other mooring point on the bow.

The polished stainless steel electric ride management system will manage at both ropes and chains, while the manual recovery module means the anchor can be recovered even in the event ofpower outage. Two-way operation can simultaneously perform up and down control.
PRODUCT ID: 1002139
SKU: NVN-1002139
CSKU: CWR-1002139
REWRITE: 1013250-lewmar-h2g-windlass-12v-8mm-5-16-gypsy
MPN: 69600533
UPC: 743683324697
ASIN: B005GM158S
WSKU: LEW69600533
SSKU:
NAME: Lewmar H2G Windlass 12 V 8 mm (5/16) Gypsy
TITLE: Lewmar H2G Windlass 12v 8MM(5/16) Gypsy
TYPE: Anchoring & Mooring -> Anchoring Accessories
SELLER: Lewmar
Title Google: Lewmar H2G Windlass 12V 8mm(5/16) Gypsy

Gtags:

GSpecs:

Lewmar H2G 12v 8MM(5/16) Gypsy Windlass Product Description

The latest generation of Lewmar's "H Series" horizontal windlass, the H2 and H3 windlasses are designed for boats from 9m (30ft) to 15m (50 feet).

The contactor is integrated into the deck unit. This saves valuable installation time because it reduces the number of components in the system. Additionally, the contactor is protected.

This has now been combined with a sleek, discreet design that takes up the minimum amount of valuable front deck area.

The electro-polished stainless steel rod management system will handle both rope and chain. Dual steering operation gives full control when ascending and descending.

Kits include: Integrated dual direction contactor, circuit breaker and toggle switch for 5/16" G4 string and 9/16-5/8" line

Quick and easy one-piece installation
Maximum pull of 1,433 lbs
Heavy-duty horizontal worm gear motor for reliable performance
Integral contactor protected by main housing while saving installation time
Sealed waterproof unit requires minimal maintenance
Aluminum and composite main housing for reduced weight.
Stainless steel warping drum with unique "Wear and Abrasion Reduction Pattern" finish

What size windlass would fit best fit your boat?
If you have a 10 m (33 ft) boat, a 270 kg (600 lb) pull windlass will generally be selected. The rule for checking your windlass selection is to add the total weight of the chain and the weight of the anchor. The rope is very light and does not affect the actual lifting performance of the windlass, but can be taken into account. For safe navigation in all tFor all types of conditions and sea areas, Lewmar recommends multiplying the total weight of your anchor and chain by 4. This number should be less than the maximum pull of the windlass you have selected. If your results are equal to or greater than the maximum pull, select the largest windlass. The windlass does not store the anchor in the trunk. Gravity stores the bike in the locker. There should be a free and unobstructed area under the hawsehole for the incoming traveler to lie down on; otherwise, the rod will get stuck. Your windlass is a recovery device; the windlass picks up the anchor and sets off. A windlass is not a high load carrying device. When at anchor, your mount should be secured to a cleat or other mooring point on the bow.

The polished stainless steel electric ride management system will manage at both ropes and chains, while the recovery moduleManual ion means the anchor can be retrieved even in the event of a power outage. Two-way operation can simultaneously perform up and down control.

Frequently asked questions (FAQ) about the Lewmar H2G 12v 8MM(5/16) Gypsy windlass Who is the Lewmar?
How to describe the Lewmar H2G 12v 8MM(5/16) Gypsy windlass ?
What are the strong points of the Lewmar H2G 12V 8mm (5/16) Gypsy windlass?
Lewmar H2G 12v 8MM(5/16) Gypsy windlass additional information?
Who is the Lewmar ? Since 1946, Lewmar has strived to make time on the water as easy and stress-free as possible; design and manufacture innovative and reliable products of the highest quality. With a range of hardware, winches, hydraulics, windlasses, anchors, thrusters, steering systems, hatches and portholes to suit every boat, from the smallest day fisherman to the largest mega-yacht, Lewmar can provide a complete solutionwhatever your project and your requirements. How to describe the Lewmar H2G 12v 8MM(5/16) Gypsy Windlass? The polished stainless steel ride's electrical management system will manage both ropes and chains, while the manual retrieval module means the anchor can be retrieved even in the event of a power outage. Bidirectional operation can simultaneously perform up and down control.

H series windlasses are the latest generation of Lewmar.ses horizontal windlasses.
Designed for boats from 9m to 15m, these windlasses have a contactor built into the deck unit.
This saves valuable installation time as it reduces the need for wiring and bolting. .

Lewmar H series windlasses are designed for boats from 9 m (30 ft) to 15 m (50 ft).
The contactor is an integral part of the bridge unit, saving installation time ande reduce complexity.
The H2 and H3 windlasses are the latest generation of Lewmar horizontal windlasses.

Lewmar b> H2G Windlass 12v is the latest generation of Lewmar horizontal windlasses designed for boats from 9 m to 15 m. This is a contactless windlass that saves installation time by integrating the contactor into the deck unit.

What are the highlights of the Lewmar H2G 12v 8MM windlass(5/16) Gypsy?

The H series windlasses are the latest generation of horizontal windlasses from Lewmar.
Designed for boats from 9m to 15m, these windlasses have a contactor integrated into the deck unit.
This saves valuable installation time as it reduces the need for wiring and bolting.
Lewmar H Series Windlasses are designed for boats from 9m ( 30 feet). ) to 15 m (50 feet).
The contactor is integrated into the bridge unit, saving moneyinstallation time and reduce complexity.
The H2 and H3 windlasses are the latest generation of Lewmar horizontal windlasses. .
Latest generation of horizontal windlasses from Lewmar, the H2 and H3 windlasses are designed for boats from 9m (30ft) to 15m (50ft).
The contactor is integrated into the unit bridge. This saves valuable installation time as it reduces the need for deck penetrations.
The H2 and H3 offer a choice of two brake types: mechanical or hydraulic.

The latest generation of 'H' series of horizontal windlasses from Lewmar, the H2 and H3 windlass are designed for boats from 9m (30ft) to 15m (50ft). The reactor is an integral part of the deck unit. This saves valuable installation time as it reduces the need for cable length.

Waterproof and corrosion resistant, these windlasses are designed for long-term use in environmentsharsh marine environments.
The H2 has a manual control option, while the H3 has an electronic control option.

Lewmar H2G Windlass 12v 8MM( 5/16) Gypsy any additional information? Check it out Lewmar H2g Windlass 12v

Lewmar is one of the leading manufacturers of marine equipment. The latest generation of horizontal "H Series" windlasses, the H2 and H3 windlasses, are designed for boats from 9 m (30 feet) to 15 m (50 feet).

Buy now Lewmar Windlass

The windlass Lewmar is the new generation of windlasses. The H2 and H3 windlasses are designed for boats from 9 m (30 ft) to 15 m (50 ft). The contactor is an integral part of the deck unit.

Click here to learn more Lewmar 12v Windlass

Lewmar is one of the leading manufacturers of boat windlass.

Shop now Lewmar H2G Windlass 12v

Lewmar H2G Windlass 12v is the latest generation of windlasses from Lewmar. The contactor makes pintegral part of the deck unit. This windlass is designed for boats from 9 m (30 feet) to 15 m (50 feet).

The latest windlass technology

The Lewmar H2 Windlass 12v is the latest technology windlass. With a contactor built into the bridge unit, it is easy to use and install. It is the perfect windlass for any boat from 9m (30ft) to 15m (50ft).

The latest windlass technology

Lewmar is a leading windlass manufacturer and the H2G Windlass 12v is the last in its range. This windlass is designed for boats from 9 to 15 meters and has a contactor integrated into the deck unit. This makes it easier to install and use.

The most convenient way to raise your anchor

Do you have a boat? If so, it's time to install a Lewmar H2G windlass. This windlass is the ideal size for boats from 9 meters to 15 meters. You will be able to increase and decrease Store your anchor with ease.

Lewmar H2G 12v windlass

Lewmar offers a new range of windlasses designed for boats from 9 m to 15 m. The contactor is an integral part of the deck unit, meaning you have a smaller, more compact and easier to install windlass. The H2G model also has an optional remote control for even more convenience

The Lewmar H2G Windlass

Lewmar is one of the leading windlass manufacturers and this latest generation is no exception. The Lewmar H2G windlass is designed for boats from 9 m (30 ft) to 15 m (50 ft). The contactor is an integral part of the deck unit for a sleek, slim design.

The latest generation of windlasses

Lewmar is proud to introduce the H2 and H3 windlasses, the latest generation of horizontal windlasses. These windlasses are designed for boats from 9 m (30 ft) to 15 m (50 ft), and the contactor is integrated into the deck unit. A contactor is an important element of any wind

Save $854 when you purchase the Lewmar H2G12v 8MM(5/16) Gypsy Windlass for only $2,189 from NVN Marine! Free same day delivery before 3 p.m. Lewmar H2G Windlass 12v 8MM(5/16) Gypsy Technical specifications

Type:	Anchoring and mooring \| Anchoring accessories
Supplier:	Lewmar
Weight:	15.0 lb

Windlass Lewmar H2G 12v 8MM (5/16) Gypsy User Reviews Lewmar H2G Windlass 12v 8MM(5/16) Gypsy Shipping & Returns

Shipping Weight:	15.0 lbs
Box sizes:	1.00 (h) x 1.00 (w) x 1.00 (w)
Cubic feet:	1.0
Returnable:	Yes
USPS First Class:	Yes
P65:	Yes
Delivery by truck:	Yes

To know detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.