LinkUp Veratron 0-5 Volt Converter Marine Navigation & Instruments

LinkUp 0-5V Converter

Easy-to-install LinkUp gateway modules replace the original wiring, providing power to both the LinkUp device and to the sensor from the NMEA 2000 backbone while still complying with NMEA 2000 certification.

Thanks to their passive wireless receiver, setup is a snap using your mobile device and LinkUp Configurator app available for Android and iOS devices. Sensor settings are configured for type, instance and warning threshold on the mobile device and then applied on the LinkUp device for instant data upload.

Before describing the different versions of LinkUp, we would like to highlight the fact that this device saves money compared to an over-engineered NMEA 2000 converter. This reduces wiring, since the complete device consists of 3 parts: a co tail30 cm chon with a standard 5-pin M12 connector, the LinkUp device itself containing the electronics of the device, notification LED, wireless interface for programming the device and the cabling on the NMEA 2000 side, which is the output of all LinkUp variants and finally a cable on the sensor side - including wires are approx. 50 cm long when unrolled.

Other advantages of this equipment are contactless configuration with your smartphone, no need to spend money on expensive hardware, and no need for power since the LinkUp is powered by NMEA. .

Finally, thanks to its hermetic housing, the device can be installed in the engine compartment in accordance with ISO 8846:1990 (protection against ignition of surrounding flammable gases). Like all of our products, LinkUp is CE, Reach and RoHS compliant.

These powerful devices are fast, efficient, secure, safe and cost-effective.

Featuresticks:

Wirelessly configurable via smartphone application
Customizable sensor curves
Approved for engine compartments according to. to ISO8846: 1990
Provides 5 V-Source for passive sensors
Configuration and alarm transmission on NMEA 2000
Plug-and-Play installation
NMEA 2000 certified

Technical specifications:

Operating voltage - 12 V (from NMEA 2000)
Input signal range - 0-5V
Protection class - IP X9/K
Power consumption - ≤ 100mA
Output current on 5V source - 15mA
Output signal - NMEA 2000
Dimensions - 125 mm x 32 mm (+cables)
Operating temperature - -30°C to +80°C
Flammability - UL94
Housing material - PC-FR
Compliance - CE, UKCA , Reach, RoHS, ISO8846:1990

PRODUCT ID: 99568
SKU: NVN-99568
CSKU:CWR-99568
REWRITE: 110679-veratron-0-5-volt-linkup-converter
MPN: B00059201
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: VERATRON 0-5 VOLT LINKUP CONVERTER
NAME_EX:
PTITLE: Veratron 0-5 Volt LinkUp Converter
TYPE : Marine Navigatisur and instruments | Gauges
SELLER: Veratron
ELECTRONICS> MARINE ELECTRONICS

Gtags:

GSpecs:

Veratron 0-5 Volt LinkUp Converter Product Description

0-5 Volt LinkUp Converter

Easy-to-install LinkUp gateway modules replace the original wiring, providing energy to both the LinkUp device and the NMEA 2000 backbone sensor while remaining compliant with NMEA 2000 certification.

Thanks to their passive wireless receiver, configuration is a snap using your mobile device and the LinkUp Configurator app available for Android and iOS devices. Sensor settings are configured for type, instance and warning threshold on the mobile device and then applied on the LinkUp device for instant data upload.

Before describing the different versions of LinkUp, we would like to highlight the fact that this device saves money compared to an over-engineered NMEA 2000 converter. It reduces wiring, since the device complet consists of 3 parts: a 30 cm pigtail with a standard 5-pin M12 connector, the inkUp device itself contains the electronics of the device, the notification LED, the wireless interface to program the device and the NMEA 2000 side wiring, which is the output of all LinkUp variants and finally a cable on the sensor side - including the wires measure approx. 50 cm long when unrolled.

Other advantages of this equipment are contactless configuration with your smartphone, no need to spend money on expensive hardware, and no need for power since the LinkUp is powered by NMEA. .

Finally, thanks to its hermetic housing, the device can be installed in the engine compartment in accordance with ISO 8846:1990 (protection against ignition of surrounding flammable gases). Like all our products, LinkUp complies with CE, Reach and RoHS standards.

These powerful devices are fast, efficientaces, secure, safe and cost-effective.

Features:

Wirelessly configurable via a smartphone application
Curves of customizable sensors
Approved for engine compartments according to. complies with ISO8846:1990
Provides a 5V source for passive sensors
Configuration and alarm transmission over NMEA 2000
Plug-and installation -Play
NMEA 2000 certified

Technical specifications:

Operating voltage - 12 V (from NMEA 2000)
Input signal range - 0-5V
Protection class - IP X9/K
Power consumption - ≤ 100mA
Output current on 5V- source - 15mA
Output signal - NMEA 2000
Dimensions - 125 mm x 32 mm (+cables)
Operating temperature - -30°C to +80°C
Flammability - UL94
Housing material - PC-FR
Compliance - CE, UKCA, Reach, RoHS, ISO8846:1990

Frequently asked questions (FAQ) about the VERATRON 0-5 VOLT LINK CONVERTER Who is the Veratron?
Who is the Veratron? Veratron was established in 2018 to serve its customers with high quality and competitively priced products. With over 45 years now in the business, Veratron has been providing the market with premium instruments. Veratron has all the skills necessary to deliver high-value solutions, from first sketches to the final product.

Save $11 when you purchase the Veratron 0-5 Volt LinkUp Converter for only $99 at NVN Marine ! Same day dispatch before 3 p.m. Veratron 0-5 Volt LinkUp Converter Technical Specifications

Type:	Navigation and Marine Instruments \| Gauges
Supplier:	Veratron
Manual ofproduct:	Download PDF
Product brochure:	Download PDF

Veratron 0-5 Volt LinkUp Converter User Reviews Veratron 0-5 Volt LinkUp Converter Shipping & Return

For detailed shipping please see our policy shipping and you can find our return and refund policy here.