Lumitec Poco 3.0 digital lighting control Lighting
Lumitec 101699 AttributesPoco Digital Lighting Control 3.0
Poco Digital Lighting Control is a Control System Cost-effective, easy to install and configure integrated digital lighting control that offers complete dimming and color control over all your Lumitec PLI compatible lights at the touch of a button via any compatible MFD or connected smart device. Poco 3.0 adds enhanced wireless security, an external API for compatibility with networked third-party automation systems, and a "Triggers" feature that allows Poco virtual switches to be triggered by external inputs – all packaged into one user interface Responsive for a better mobile device. ease of use.
Features:
- PWR: 10-30 VDC POCO positive power supply. The line must be protected by a fuse before being connected to the POCO with a 3A ATC blade fuse or equivalent (continuously lit or switched with ACC line)
- GRND: POCO 10-30 VDC negative power supply
- ACC: positive 10-30 VDC, Low current activation line to turn on POCO from a remote device (i.e. MFD) (must be powered to activate Poco)
- 1-4 IN: Channel input power. The line must be fused before connecting to the POCO with a 10 Amp ATC blade fuse or equivalent (14 AWG 300 V cable 16 inches long)
- 1-4 OUT: output power channel to the lighting circuit. Maximum load of 10 A per channel. Maximum total load on all channels is limited to 40 amps. The load on the channel should only be one of the following (Lumitec PLI compatible lighting/dimming capable lighting (via PWM)/device requiring standard ON-OFF circuitry) (14 AWG 300V cable 16 inches long)
- LAN: connection tolocal network. 10/100 Base T data connection to POCO. Standard CAT-5 cable with RJ45 connector required for plugging into a sealed network cable adapter. (18" long cable with Link LED)
- POWER: Indicator - lights green if POCO is powered, PWR and ACC lines must have supply voltage between 10 and 30 VDC
- CH1 -4: Indiceator - Lights red if power is supplied to the channel from the fuse/breaker panel: - Lights green if power is supplied to the channel channel input and the channel is turned on inside the POCO controller; PLI enabled LEDs can be turned off: - Blinks orange if PLI data is being transmitted: - Lights orange if the channel is attenuated via a PWM signal.
- STATUS: Blinking green LED indicates the WiFi connection status: - 0 flashes: WiFi disabled - 1 flash: WiFi enabled but connected to no peer - 2 flashes : WiFi is connected to one or more peers. The flashing blue light indicates the status of the Bluetooth-LE connection: - 0 flashes: Bluetooth-LE is disabled - 1 flash: Bluetooth-LE enabled but not connected - 2 flashes: Bluetooth-LE is connected
PRODUCT ID: 89026
SKU: NVN-89026
CSKU: CWR-89026
REWRITE: 100137-lumitec-poco-digital-lighting-control-3- 0
MPN: 101699
UPC: 089300016997
ASIN: B09JGK8661
WSKU: LUM101699
SSKU: LTEC-101699
KSKU: LTC101699
GSKU:
MSKU:
LSKU: 451-101699
NAME: Lumitec Poco 3.0 Digital Lighting Control
EX_NAME: LUMITEC POCO 3.0 DIGITAL LIGHTING CONTROL MODULE
PTITLE: Lumitec Poco 3.0 Digital Lighting Control
TYPE: Lighting | Accessories
SELLER: Lumitec
VEHICLES AND PARTS> VEHICLE PARTS AND ACCESSORIES> POWERWATER PARTS AND ACCESSORIES
Googl Titlee:
Gtags:
GSpecs:
Lumitec Poco Digital Lighting Control 3.0 Product Description Lumitec 101699 Attributes
Poco Digital Lighting Control 3.0
Poco Digital Lighting Control is an inexpensive, easy to install and configure integrated digital lighting control system that provides complete dimming and color control on all your Lumitec PLI compatible lights with the push of a button via any compatible MFD or connected smart device. Poco 3.0 adds enhanced wireless security, an external API for compatibility with networked third-party automation systems, and a "Triggers" feature that allows Poco virtual switches to be triggered by external inputs – all packaged into one user interface Responsive for a better mobile device. ease of use.
Features:
- PWR: positive power supply 10-30VDC POCO. The line must be fused before connecting to the POCO with a 3A ATC blade fuse or equivalent (constant ON or switched with ACC line)
- GRND: POCO power negative 10- 30 VDC
- ACC: 10-30 VDC positive, low current enable line to turn on the POCO from a remote device (i.e. an MFD) (must be powered to activate Poco)
- 1-4 IN: Channel input power. The line must be fused before connecting to the POCO with a 10 Amp ATC blade fuse or equivalent (14 AWG 300 V cable 16 inches long)
- 1-4 OUT: output power channel to the lighting circuit. Maximum load of 10 A per channel. Maximum total load on all channels is limited to 40 amps. The load on the channel should only be one of the following (Lumitec PLI compatible lighting/dimming capable lighting (via PWM)/device requiring standard ON-OFF circuitry) (14 AWG 300V cable 16 inches long)
- LAN: Connection to local area network. 10/100 Base T data connection to POCO. Standard CAT-5 cable with RJ45 connector required for plugging into a sealed network cable adapter. (18 inch long cable with Link LED)
- POWER: Indicator - lights green if POCO is powered, both PWR and ACThe C lines must have a supply voltage between 10 and 30 VDC.
- CH1-4: Indicator - Lights red if power is supplied to the channel from the fuse/breaker panel: - Lights green if power is provided to the channel input and the channel is enabled inside the POCO controller; PLI enabled LEDs can be turned off: - Blinks orange if PLI data is being transmitted: - Lights orange if the channel is attenuated via a PWM signal.
- STATUS: Blinking green LED indicates the WiFi connection status: - 0 flashes: WiFi disabledactivated - 1 blink: WiFi enabled but connected to no peer - 2 blinks: WiFi is connected to one or more peers. The flashing blue light indicates the status of the Bluetooth-LE connection: - 0 flashes: Bluetooth-LE is disabled - 1 flash: Bluetooth-LE enabled but not connected - 2 flashes: Bluetooth-LE is connected
Lumitec Poco Digital Lighting Control 3.0 Related ProductsLumitec Pico S-8 Expansion Module
Frequently Asked Questions (FAQ) about Lumitec Poco Digital Lighting Control 3.0 Who is the Lumitec?
How to describe the Lumitec Poco Digital Lighting Control 3.0?
How heavy is the product?
Who is the Lumitec? The current rapid pace of LED development suggests that the way we think about lighting is about to change profoundly. These changes create new opportunities and new challenges. Lumitec is a company that was conceived and designedto overcome these challenges and take advantage of these opportunities. Lumitec has been carefully designed to provide boat builders with the most usable, durable and attractive lights on the market. How to describe Lumitec Poco Digital Lighting Control 3.0? The POCO Lighting Module, version 3.0, replaces physical circuits, wires and switches, simplifying wiring diagrams and saving time and money. When installed with Lumitec's PLI compatible lights, it activates all of the features of those lights. MFG# 101699What is the weight of the product? 2
Save $145 when you purchase the Lumitec Poco 3.0 Digital Lighting Control for only $223at NVN Marine! Free same day delivery before 3 p.m. Lumitec Poco Digital Lighting Control 3.0 Videos Lumitec Poco Digital Lighting Control 3.0 Technical specifications
| Type: | Lightingrage | Accessories |
|---|---|
| Supplier: | Lumitec |
| Weight: | 0.8 lbs |
| User Guide: | Download PDF |
| Shipping Weight: | 0.8 lbs |
|---|---|
| Box Sizes: | 1.00 (h) x 7.00 (w) x 9.00 (l) |
| Cubic feet: | 63.0 |
| Returnable: | Yes |
| USPS First Class: | Yes |
For shipping conditions detailed, please see our shipping policy and you can find our return and refund policy here.
