Magnum ME-BMK Battery Monitor State of Charge with Shunt Electrical
Monitoring your battery bank is easy with the Battery Monitoring Kit (ME-BMK)* from Magnum Energy. Acting as a "fuel gauge"? For your batteries, the ME-BMK monitors their State of Charge (SOC) then provides this information in an easy-to-understand display via the ME-RC remote control. With accurate SOC readings, you can avoid unnecessary battery charging, saving fuel and maintenance costs in the long run.
If you already own a Magnum Inverter/Charger and Magnum Remote*, The ME-BMK is an easy-to-use tool. renovation. Simply install the kit according to the installation manual and start monitoring your battery bank via the "meter" on your ME-RC.
Available readings from the ME-BMK
-
State of Charge (SOC)
-
0 - 100%
-
DC Volts
-
DC Amps
-
Input/Output Ampere Hours
-
Output amp-hours
-
Total amp-hours
-
Minimum DC volts
-
Maximum DC Volts
-
Temperature compensation
- Automatic input voltage detection
ME-BMK
DC Volts 7 to 70 (±0.5%) Automatic voltage detection
DC Amps ±0.1 to 999 (±1.0%)
Battery SOC % 0 to 100% (in increments of 1%)
Power consumption <0.6 watts
Input/output amp-hours ±32,768 amp-hours (1 AH increments)
rAH output (resettable amp-hours removed) 0 to 65,353 amp-hours, resettable (0.1 AH increments)
tAH output (total amp hours removed) 0 to 65,535,000 amp hours (0.1k or 100 AH increments)
Minimum/maximum DC 7 to 70 VDC, resettable
Shipping weight 2 lb (0.9 kg)
The kit includes Manual, modulsensing wire, DC shunt, twisted pair wire and communication cable
Sensing wire Twisted pair ?blue and orange, 5? length, 18 AWG wire
2 conductor communications cable, 10 ? twisted pair, telephone standard
Remote requirements Use with a ME-RC with firmware revision 2.0 or higher
Shunt DC
Resistance 0.1 milliohm (500A at 50mV)
Continuous current 410 amps maximum
Overload Current Overload up to 500 amps for less than 5 minutes when operating normally at less than 300 amps
Like a battery fuel gauge, me-bmk monitors status battery charge, then provides this information in an easy-to-understand display via the me-rc remote...
PRODUCT ID: 1001067
SKU: NVN-1001067
CSKU: CWR-1001067
REWRITE: 1012178-magnum-me-bmk-battery-monitor-state-of-charge
MPN: ME-BMK
UPC: 892608001196
ASIN: B00DG5SSH8
WSKU: MGNMEBMK
SSKU: MAGN-ME-BMK
NAME: Magnum ME-BMK Battery Monitor State of Charge with Shunt
PTITLE: State of Charge of Magnum ME-BMK Battery Monitor with Shunt
PTITLE: State of Charge of Magnum ME-BMK Battery Monitor with Shunt Magnum ME-BMK battery monitor With Shunt
TYPE: Electric -> Inverters
SUPPLIER: Magnum
Battery Monitor Magnum ME-BMK battery monitoring
Gtags:
| Dark gray |
GSpecs:
Magnum ME-BMK Battery Monitor State of Charge with Shunt Product Description
Monitoring your battery bank is easy with the Battery Monitoring Kit (ME-BMK)* from Magnum Energy. Acting as a "fuel gauge"? For your batteries, the ME-BMK monitors their State of Charge (SOC) then provides this information in an easy-to-understand display via the ME-RC remote control. With accurate SOC readings, you can avoid unnecessary battery charging, saving fuel and maintenance costs in the long run.
If you already own a Magnum Inverter/Charger and Magnum Remote*, The ME-BMK is an easy-to-use tool. renovation. Simply install the kit according to the installation manual and start monitoring your battery bank via the "meter" on your ME-RC.
Available readings from the ME-BMK
-
State of Charge (SOC)
-
0 - 100%
-
Flightyour CC
-
DC amps
-
Input/output amp hours
-
Amp hours output
-
Total amp hours out
-
Minimum DC volts
-
Maximum DC Volts
-
Temperature compensation
- Automatic input voltage detection
ME-BMK
DC Volts 7 to 70 (±0.5%) automatic voltage detection
DC Amps ±0.1 to 999 (±1.0%)
Battery SOC % 0 to 100% (in 1% increments)
Power consumption <0.6 watts
Ampere-hour input/output ±32,768 amp-hours (1 AH increments)
rAH output (resettable amp hours removed) 0 to 65,353 amp hours, resettable (0.1 AH increments)
TAH out (total amp-hours removed) 0 to 65,535,000 amp-hours (0.1k or 100 AH increments)
DC minimum/maximum 7 to 70 VDC, resettable
Shipping weight 2 lb (0.9 kg)
Kit includes manual, sensing module, DC shunt, twisted pair wire, and communication cable
Detection wire Twisted pair ?blue and orange, 5? length, 18 AWG wire
2 conductor communications cable, 10 ? twisted pair, telephone standard
Remote requirements Use with a ME-RC with firmware revision 2.0 or higher
DC Shunt
Resistance 0.1 milliohm (500A at 50mV)
Continuous current 410 amps maximum
Overload Current Overloads at 500 amps for less than 5 minutes if operating normally at less than 300 amps
As a battery fuel gauge, me-bmk monitors the battery charge status, then provides this information in a simple way. -to understand the display using the me-rc remote control...
Frequently asked questions (FAQ) about the status monitore Magnum ME-BMK battery charging with Shunt Who is the Magnum?
How to describe the charging status of the Magnum ME-BMK battery monitor with Shunt?
What are the highlights of the battery monitor? Magnum ME-BMK battery state of charge with Shunt?
What are the main features of the Magnum ME-BMK Battery state of charge monitoring with Shunt?
What is the warranty policy of Magnum ME-BMK Battery Monitor State of Charge with Shunt?
What is the operating voltage of the product?
What is the product type?
Who is the Magnum? Magnum Energy is a leading North American manufacturer of inverter/battery chargers, inverter accessories, enclosures, circuit breakers, fuse block assemblies, mini panels, conduit boxes, expansion boxes and other system products. - for mobile applications including utilities, motorhomes and marines; renewable energy applications and the export market. Manufactured in Everett, Washington, and St. Paul, Minnesota, they boast more than 150 years of combined inverter design and manufacturing experience. Magnum Energy uses advanced techniques to build some of the most reliable, advanced and durable systems. inverter and chargers for off-grid solar energy solutions. How to describe the state of charge of the Magnum ME-BMK Battery Monitor with Shunt? As a battery fuel gauge, me-bmk monitors the battery's charge status, then provides this information in an easy-to-understand display via the me-rc remote... What are the highlights of the status monitor? Magnum ME-BMK battery charge with shunt? What are the main features of the Magnum ME-BMK Battery Status Monitor with Shunt?
- Monitor the groupof batteries and provides valuable information to Magnum remote control panels
- Provides a "fuel gauge" charge percentage for a single battery bank
- Relays valuable information to control panel including:
- State of charge
- Real-time amps
- Input/output amp hours
- Min/max DC volts
- Includes sensor, 500A shunt and communication cables
- Requires ME-ARC, ME-RC or ME-RTR remote control (sold separately)
Buy the best price Magnum ME-BMK Battery Monitor with Shunt for only $190 at NVN Marine! Same day dispatch before 3 p.m. Charging status ofMagnum ME-BMK battery monitor with shunt Technical specifications
| Type: | Electric | Inverters |
|---|---|
| Supplier: | Magnum |
| Weight: | 2.0 lbs |
| Shipping Weight: | 2.0 lbs |
|---|---|
| Box sizes: | 1.00 (h) x 1.00 (w) x 1.00 (w) |
| Cubic feet: | 1.0 |
| Returnable : | Yes |
| USPS First Class: | Yes |
| P65: | Yes |
To know detailed shipping terms, please check our shipping policy and you can find our policyEU returns and refunds here.
