Maretron FPM100 Fluid Pressure Monitor Marine Navigation & Instruments
The Maretron Fluid Pressure Monitor is used to adapt up to six pressure transducers to the NMEA 2000 network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the vessel where NMEA 2000 compatible displays are located. With the appropriate transducer, the FPM100 reports pressure or vacuum for a variety of applications, including water pressures, oil pressures, hydraulic pressures, or system vacuum to detect clogged filters. p>
The FPM100 also has a tank level mode. , so that fluid levels in a tank can be monitored via a pressure transducer mounted on the bottom of the tank and transmitted over the NMEA 2000 network. This allows you to monitor fluid levels in tanks that are extremely deep, have internal structures, or are not suitable for other technologies.tank level detection ogies. In this mode, the FPM100 can be calibrated for irregular tank shapes so you know the tanks true level.
The FPLe M100 is NMEA 2000 certified so you can view all information anywhere on the vessel using a compatible NMEA 2000 display. The FPM100 is a key component of Maretron's N2KView vessel monitoring and control system.
*The FPM100 requires configuration. (Maretron DSM250, DSM410, USB100 or IPG100 required for setup)
Fluid Pressure Monitor
The Maretron Fluid Pressure Monitor is used to adapt up to six pressure transducers to the NMEA 2000 network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the vessel where NMEA 2000 compatible displays are located. With the transducersuitable toner, the FPM100 reports pressure or vacuum for a variety of applications, including water pressures, oil pressures, hydraulic pressures or system vacuum to detect clogged filters.
The FPM100 also features a tank level mode, so fluid levels in a tank can be monitored via a pressure transducer mounted at the bottom of the tank and transmitted over the NMEA 2000 network. This allows you to monitor fluid levels in tanks that are extremely deep, have internal structures, or are not suitable for other tank level sensing technologies. In this mode, the FPM100 can be calibrated for irregular tank shapes so you know the actual level of the tanks.
The FPM100 is NMEA 2000 certified so you can view all the information anywhere on the vessel using a NMEA 2000 compatible display. The FPM100 is a key part of Maretron's N2KView vessel monitoring and control system.
Features:
- Adapts up to six pressure transducers to the NMEA 2000 network
- Each channel is independently programmed to match pressure transducer characteristics
- Each channel is independently programmed in pressure/vacuum mode or tank level mode
- In tank level mode, measurement extremely deep or irregularly shaped reservoir levels
- /li>
Applicationions
- Water pressure
- Atmospheric pressure
- Compressed air pressure
- Hydraulic pressure
- Vapor pressure
- User defined pressure sources
- Remaining fuel tank level/volume
- Remaining level/volume of the fresh water tank
- Remaining level/volume of the reservoirwastewater reservoir
WARNING :This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to P65Warnings. ca.gov.
Whether you're a professional or someone who enjoys cruising, you can get the most out of your boat and your time on the water Based on Principle! to take into account the highest standards of quality and reliability, each...n-fpm100 Fluid Pressure Monitor
MPN: FPM100-01
UPC: 873804002903
ASIN: B00LEFQP2M
WSKU: MARFPM10001
SSKU: MRTN-FPM100-01
KSKU: MRTFPM10001
GSKU: FPM100-01
MSKU:
LSKU:
NAME: Maretron FPM100 Fluid Pressure Monitor
br> NOM_EX: FLUID PRESSURE MONITOR MARETRON FPM100
PTITLE: Maretron FPM100 Fluid Pressure Monitor
br> TYPE: Marine Navigation & Instruments | NMEA Cables and Sensors
SUPPLIER: Maretron
ELECTRONICS> MARINE ELECTRONICS> Marine Chartplotters and GPS
Sports
Maretron FPM100-01 Fluid Pressure Monitor
br> Maretron Fpm100 Fluid Pressure Monitor by Hodges Marine
Sports
Gtags:
GSpecs:
Maretron FPM100 Fluid Pressure Monitor Product Description
The Maretron Fluid Pressure Monitor is used to adapt up to six pressure transducers to the NMEA 2000 network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the vessel where NMEA 2000 compatible displays are located. With the appropriate transducer, the FPM100 reports pressure or vacuum for a variety of applications, including water pressures, oil pressures, hydraulic pressures, or system vacuum to detect clogged filters. p>
The FPM100 also has a tank level mode. , so that fluid levels in a tank can be monitored via a pressure transducer mounted on the bottom of the tank and transmitted over the NMEA 2000 network. This allows you to monitor fluid levels in extremely deep tanks, domitted from internal structures or which are not suitable for other tank level detection technologies. In this mode, the FPM100 can be calibrated for irregular tank shapes so you know the actual level of the tanks.
The FPM100 is NMEA 2000 certified so you can view all the information anywhere on the vessel using a compatible NMEA 2000 display. The FPM100 is a key component of Maretron's N2KView vessel monitoring and control system.
*The FPM100 requires configuration. (Maretron DSM250, DSM410, USB100 or IPG100 required for setup)
Fluid Pressure Monitor
The Maretron Fluid Pressure Monitor is used to adapt up to six pressure transducers to the NMEA 2000 network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the vesselwhere there are NMEA 2000 compatible displays. With the appropriate transducer, the FPM100 reports pressure or vacuum for a variety of applications, including water pressures, oil pressures, hydraulic pressures, or system vacuum to detect clogged filters.
The FPM100 also features a tank level mode, so liquid levels in a tank can be monitored via a pressure transducer mounted on the bottom of the tank and transmitted over the NMEA 2000 network. This allows you to monitor fluid levels in tanks that are extremely deep, have internal structures, or are not suitable for other tank level sensing technologies. In this mode, the FPM100 can be calibrated for irregular tank shapes so you know the actual level of the tanks.
The FPM100 is NMEA 2000 certified so you can view all information anywhere.e wherever on the vessel using a NMEA 2000 compatible display. The FPM100 is a key part of Maretron's N2KView vessel monitoring and control system.
Features:
- Adapts up to six pressure transducers to the NMEA 2000 network
- Each channel is independently programmed to match pressure transducer characteristics
- Each channel is independently programmed in pressure/vacuum mode or tank level mode
- In tank level mode, measurement extremely low levelsEP or irregularly shaped tanks
Applications
- Water pressure
- Atmospheric pressure
- Compressed air pressure
- Hydraulic pressure
- Steam pressure
- br>
- User Defined Pressure Sources
- Fuel Tank Level/Volume
- Fuel Tank Level/Volume fresh water
- Levelwater/waste tank volume Remaining
This product can expose you to chemicals known to the State of California to cause cancer , birth defects or other reproductive problems. For more information,
Whether you're a professional or someone who enjoys cruising, you can get the most out of your boat and of your time on the water! Based on the principle of taking into account the highest standards of quality and reliability, each...
Maretron FPM100 Fluid Pressure Monitor Related ProductsMaretron Micro Tee
Double Micro Cord end Maretron - 0.5 M
Maretron Double Ended Microphone Cord - 1 Meter
Maretron Double Ended Microphone Cord - 3 M
Maretron Double Ended Microphone Cord - 6 Meters
Double Microphone Cord End Maretron Cord - 2 meters
Cord Maretron Micro Double Ended - 4 Meters
Maretron Micro Double Ended Cord 5 Meters
Maretron Pressure Transducer 0 to 3 PSI
Maretron Pressure Transducer 0 to 5 PSI
Frequently Asked Questions (FAQ) about the Maretron FPM100 Fluid Pressure Monitor Who is the Maretron?
How to describe the Maretron FPM100 Fluid Pressure Monitor?
What is it than the exterior color of the product?
In which country is this product manufactured?
What are the dimensions and weight of the Maretron FPM100 fluid pressure monitor?
What is the connector type of the product?
What is the product communication method?
What are the manufacturer's notes on the Maretron FPM100 fluid pressure monitor?
Who is the Maretron? Marétronproducts, from GPS receivers to transducers, are designed to withstand the harshest marine conditions. Maretron protects and healsUse all of our electronic devices, even equipment below deck, in waterproof enclosures to ensure years of reliable performance. Superior engineering, maximum precision, consistent reliability: three reasons why Maretron products are among the best in the world. How to describe the Maretron FPM100 Fluid Pressure Monitor?
The Maretron Fluid Pressure Monitor is used to adapt up to six pressure transducers to the NMEA 2000 network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the vessel where NMEA 2000 compatible displays are located. With the appropriate transducer, the FPM100 reports pressure or vacuum for a variety of applications, including water pressures, oil pressures, hydraulic pressures, or system vacuum to detect clogged filters. p>
The FPM100 availableIt also comes with a tank level sensor, so that fluid levels in a tank can be monitored via a pressure transducer mounted on the bottom of the tank and transmitted over the NMEA 2000 network. This allows you to monitor fluid levels in tanks that are extremely deep, have internal structures, or are not suitable for other tank level sensing technologies. In this mode, the FPM100 can be calibrated for irregular tank shapes so you know the actual tank level.
The FPM100 is NMEA 2000 certified so you can view all information at any time. where on the ship. using a compatible NMEA 2000 display. The FPM100 is a key component of Maretron's N2KView vessel monitoring and control system.
*The FPM100 requires configuration. (Maretron DSM250, DSM410, USB100 or IPG100 required for configuration)
Whatis the exterior color of the product? Black- In which country is this product made? United StatesWhat are the dimensions and weight of the Maretron FPM100 fluid pressure monitor? 7 (l) X 4.5 (h)) X 9.5 (w) inches and the weight is: 1.39 lbs. What is the connector type of the product? NMEA2000 MicroWhat is the product's communication method? NMEA 2000What are the manufacturer's ratings for the Maretron FPM100 Fluid Pressure Monitor?
The Maretron Fluid Pressure Monitor is used to adapt up to six pressure transducers to the NMEA 2000 network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the vessel where NMEA 2000 compatible displays are located. With the appropriate transducer, the FPM100 reports pressure or vacuum for a variety of applications including water pressures, oil pressures, lHydraulic pressures or system vacuum to detect clogged filters.
The FPM100 also has a tank level mode. , so that fluid levels in a tank can be monitored via a pressure transducer mounted on the bottom of the tank and transmitted over the NMEA 2000 network. This allows you to monitor liquid levels in tanks that are extremely deep, have internal structures, or are not suitable for other tank level detection technologies. In this mode, the FPM100 can be calibrated for irregular tank shapes so you know the actual tank level.
The FPM100 is NMEA 2000 certified so you can view all information at any time. where on the ship. using a compatible NMEA 2000 display. The FPM100 is a key component of Maretron's N2KView vessel monitoring and control system.
*The FPM100 requires aconfiguration. (Maretron DSM250, DSM410, USB100 or IPG100 required for setup)
Save $74when you purchase the Maretron FPM100 Fluid Pressure Monitorfor only $345from NVN Marine! Same day dispatch before 3 p.m. Maretron FPM100 Fluid Pressure Monitor Technical Specifications
| Type: | Marine Navigation & Instruments | NMEA cables and sensors |
|---|---|
| Supplier: | Marétron |
| Weight: | 1.2 lbs |
| User Guide: | Download PDF |
| Product Manual: | Download PDF |
| Product brochure: | Download PDF |
| Product installation: | Download PDF |
| Shipping Weight: | 1.2 lbs |
|---|---|
| Box sizes: | 4.00 (h) x 7.00 (w) x 10.00 (w) |
| Cubic Feet: | 280.0 |
| Returnable: | Yes |
| P65: | Yes |
For detailed shipping policy, please see our shipping policy and you can find our return policy. and refund policy here.
- Maretron FFM100 Fuel Flow Monitor
- Maretron exhaust gas temperature sensor
- Maretron E2500 f/N2KView Wireless N Router
- Maretron DT06-12SA - J1 mating connector 12 pin
- Maretron DT06-08SA-E003 - J2 mating connector 8 pin
- Maretron DST110 Depth/Speed/Temperature Transducer
- Maretron DST100 and DST110 Bronze Housing Kit - Transducer not included
