Maretron micro in-line terminating resistor Marine Navigation & Instruments

Used in tight feeds that do not allow "T" drops. Prevents signal reflection.

Two termination resistors are required on each NMEA 2000 network, one at each end of the trunk line. Normally a male termination is used because the male pins tend to point toward the power source. In cases where the gender is reversed, a female terminator may be required. The inline terminator is used where the network terminates at a product.

Maretron ITCMCF attributes
Micro In-Line Termination Resistance

In-line termination is used when the NMEA 2000 network terminates at a product, for example at the top of a weather instrument mast or a GPS antenna/receiver. The in-line termination plugs directly into the product, with the other end connected to the network cable.

Micro terminating resistors typically terminate generally the network by connecting to a tee. In-line terminator does not require a tee and easily integrates into an instrument NT mounting pipe where a tee would not

Robust IP-68 rated (submersible) connectors for continuous connection integrity in a marine environment

Screw terminal connector for positive connections
Molded Body Mat/Color: PUR Thermoplastic/Black
Contact Support Mat/Color: PUR Thermoplastic/Black
Contact Mat/Plating: Brass/Gold
Coupling Nut Carpet/Plating: Brass/Nickel

ELECTRICAL:

Rated voltage: 10-30 V DC
Internal resistance: 121 Ohms (1/4 W)

ENVIRONMENT:

Protection class: IEC IP68, NEMA 1,3,4,6P
NMEA APPROVALS: NMEA 2000 APPROVED
IEC: IEC 61162-3

PRODUCT ID: 31795
SKU: NVN-31795
CSKU: CWR-31795
REWRITE: 42906-maretron-micro-inline-termination-resistor
MPN: IT-CM-CF
UPC: 873804001678
ASIN: B001VZ4T2S
WSKU: MARITCMCF
SSKU: MRTN-IT- CM-CF
KSKU: MRTITCMCF
GSKU: IT-CM-CF
MSKU:
LSKU:
NAME: Maretron In-Line Micro Termination Resistor
EX_NAME: MICRO TERMINATION RESISTOR IN-LINE MARETRON
br>PTITLE: Maretron In-Line Micro Termination Resistor
TYPE: Navigation and Marine Instruments | NMEA Cables and Sensors
SELLER: Maretron
ELECTRONICS> MARINE ELECTRONICS> Marine Chartplotters and GPS
Sports
Maretron IT-cm-CF Micro Inline Terminator
br> Maretron Micro Inline Termination Resistor
Categorye Amazon: Sports
Gtags:

GSpecs:

Maretron Micro In-Line Terminating Resistor Product Description

Used in tight power supplies not allowing 'T' drops. Prevents signal reflection.

Maretron ITCMCF Attributes
Micro in-line termination resistor

In-line termination is used when the NMEA 2000 network terminates at a product, for example at the top from the mast of a meteorological instrument or GPS antenna. receiver. The inline termination plugs directly into the product, the other extremitted being connected to the network cable.

Micro-terminating resistors generally terminate the network by connecting to a tee. The in-line terminator does not require a tee and easily inserts into an instrument mounting pipe where a tee would not

Robust IP-68 rated connectors (submersible) for continuous connection integrity in a marine environment

Miniature terminating resistors typically terminate the network by inserting a tee. The in-line terminator does not require a tee and can be easily installed in the instrument mounting bracket...

Screw terminal connector for positive connections
Molded Body Mat/Color: PUR Thermoplastic/Black
Contact Support Mat/Color: PUR Thermoplastic/Black
Contact Mat/Plating: Brass/Gold
Coupling Nut Matte/Plating: Brass/Nickel

ELECTRIQUE:

Rated voltage: 10-30 V DC
Internal resistance: 121 Ohms (1/4 W)

ENVIRONMENT:

Protection class: IEC IP68, NEMA 1.3, 4.6P
NMEA APPROVALS: NMEA 2000 APPROVED
IEC: IEC 61162-3

Frequently asked questions (FAQ ) about the Maretron Micro Inline Termination Resistor Who is the Maretron?
How to describe the Maretron Micro Inline Termination Resistor?
What is the exterior color of the product?
What is the type of product?
In which country is this product manufactured?
What is the Dimensions and weight of the Maretron Micro Inline terminating resistor package?
What is the connector type of the product?
/> What is the product communication method?
What are the manufacturer's notes on the Maretron Micro Inline Resistor Termination?
Who is Maretron? Maretron products,GPS receivers and transducers are designed to withstand the harshest marine conditions. Maretron carefully protects all of our electronic devices, even equipment below deck, in waterproof enclosures to ensure years of reliable performance. Superior engineering, maximum precision, consistency, reliability: three reasons why Maretron products are among the best in the world. How to describe the Maretron Micro In-Line Termination Resistor?

Used in tight feeds that do not allow "T" drops. Prevents signal reflection.

Two termination resistors are required on each NMEA 2000 network, one at each end of the trunk line. Normally a male termination is used because the male pins tend to point toward the power source. In cases where the gender is reversed, a female terminator may be required. Inline terminator is usedwhere the network ends at a product.

What is the exterior color of the product? Gray

Used in tight feeds that do not allow "T" drops. Prevents signal reflection.

Two termination resistors are required on each NMEA 2000 network, one at each end of the trunk line. Normally a male termination is used because the male pins tend to point toward the power source. In cases where the gender is reversed, afemale terminator may be required. In-line termination is used where the network terminates at a product.

Resistor Micro Maretron

$17

Type:	Marine Navigation & Instruments \| NMEA Cables and Sensors
Supplier:	Maretron
Weight:	0.1 lb
Product brochure:	Download PDF

Shipping Weight:	0.1 lbs
Box Sizes:	2.00 (h) x 2.00 (w) x 2.00 (l)
Cubic feet:	8.0
Recordable:	Yes
USPS First Class:	Yes

For details detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.