Maretron NMEA 2000 network bus extension Marine Navigation & Instruments

Maretron NBE10001 Attributes
Network Bus Extender
Part #: NBE100-01

NBE100 Maretron (Bus Network Extender) allows you to extend the maximum number of nodes, network network length and cumulative drop length of any NMEA 2000 network. The NBE100 resolves bus errors and other electrical problems caused by overcoming any of these limitations and facilitates the design of large networks. NMEA 2000 networks have a maximum of 50 nodes allowed on a single network, a maximum network length of 200 m, and a maximum cumulative drop length of 78 m. If your network exceeds any of these specifications, you can simply disconnect the network trunk in the middle and connect the ends to the NBE100, along with additional termination resistors. This will divide the network into two electrical segments, each of which can contain up to 50 nodes, for a total of 100 nodes on the logical network. The NBE100 will seamlessly route NMEA 2000 messages between the two network segments, making them operate as a single logical NMEA 2000 network. Advanced priority-based message routing ensures that higher priority messages always take priority over lower priority messages, enabling predictable and reliable network operation.

Features:

Segments a single large NMEA 2000 network into two smaller electrical segments
Allows you to exceed the 50 node limit on a NMEA 2000 network
Allows you to exceed the link length limit of 200 m on a NMEA 2000 network
Allows you to exceed the cumulative drop length limit of 78 m on a NMEA 2000 network
Allows all NMEA 2000 networks to operate as if they were still on a single NMEA 2000 network
Message routing basedover priority ensures that higher priority messages pass through the bus extender first
Optically isolates network segments, increasing signal integrity and network reliability.

NBE100 (MaretronBus Network Extender) allows you to extend the maximum number of nodes, network network length and cumulative socket length of any NMEA 2000 network. NBE resolves errors bus and other electrical problems caused by exceeding any of these limits, and facilitates the design of large networks. The NMEA¢°¢°¢° network allows up to ¢µ¢° nodes on a single network, the maximum network trunk length is ¢°¢°m, and the maximum cumulative discharge length is ¢·¢¸m. If your network exceeds any of these specifications, simply disconnect the central network trunk and connect both ends to the NBE via additional termination resistors. cela will divide the network into two electrical parts. Each electrical part can contain up to 1/3 nodes, and the logic network can contain a total of 1/3 nodes. NBE¢°¢° will seamlessly route NMEA messages between the two network segments, making it a logical NMEA network. High-priority-based message routing ensures that high-priority messages always take priority over low-priority messages, thereby achieving predictable and reliable network operations. -maretron-nmea-2000-network-bus-extender
MPN: NBE100-01
UPC: 873804003078
ASIN: B008JH6LW2
WSKU: MARNBE10001
SSKU: MRTN-NBE100-01
KSKU: MRTNBE10001
GSKU:
MSKU:
LSKU:
NAME: Maretron NMEA 2000 Network Bus Expansion
NAME_EX: MARETRON NMEA 2000 NBE100 NETWORK BUS EXTENSION
PTITLE: Maretron NMEA 2000 Network Bus Extension
TYPE: Navigation and Marine Instruments | NMEA Cables and Sensors
SELLER: Maretron
ELECTRONICS> MARINE ELECTRONICS> Marine Chartplotters and GPS
Wireless
Maretron NMEA 2000 Network Bus Extension
Maretron Network Bus Extension NMEA 2000
Wireless
Gtags:

GSpecs:

Maretron NMEA 2000 Network Bus Extender Product Description Maretron NBE10001 Attributes
Network Bus Extender
>Part #: NBE100-01

Maretron's NBE100 (Network Bus Extender) allows you to extend the maximum number of nodes, network trunk length and cumulative drop length of any network NMEA 2000. The NBE100 resolves bus errors and other electrical problems caused by exceeding any of these limitations and facilitates the design of large networks. NMEA 2000 networks have a maximum of 50 nodes allowed on a single network, a maximum network length of 200 m, and a maximum cumulative drop length of 78 m. If your network exceeds any of these specifications, you can simply disconnect the network trunk in the middle and connect the ends to the NBE100, along with additional termination resistors. This will divide the network into two electrical segments, each pcan contain up to 50 nodes, for a total of 100 nodes on the logical.work network. The NBE100 will seamlessly route NMEA 2000 messages between the two network segments, making them operate as a single logical NMEA 2000 network. Advanced priority-based message routing ensures that higher priority messages always take priority over lower priority messages, enabling predictable and reliable network operation.

Features:

Segments a single large NMEA 2000 network into two smaller electrical segments
Allows you to exceed the 50 node limit on a NMEA 2000 network
Allows you to exceed the link length limit of 200 m on a NMEA 2000 network
Allows you to exceed the cumulative drop length limit of 78 m on a NMEA 2000 network
Allows all NMEA 2000 networks to operate as if they werewere always on a single NMEA 2000 network
Priority-based message routing ensures that higher priority messages go through the bus extender first

Optically isolates network segments, thereby increasing the signature Final integrity and reliability of the network

The NBE100 (Network Bus Extender) from Maretron allows you to extend the maximum number of nodes, the length of the network trunk and the cumulative tap length of any NMEA 2000 network. NBE resolves bus errors and other electrical problems caused by exceeding any of these limits, and makes it easier to design large networks. The NMEA¢°¢°¢° network allows up to ¢µ¢° nodes on a single network, the maximum network trunk length is ¢°¢°m, and the maximum cumulative discharge length is ¢·¢¸m. If your network exceeds any of these specifications, simply disconnect the central network trunk ande connect both ends to the NBE via additional termination resistors. This will divide the network into two electrical parts. Each electrical part can contain up to 1/3 nodes, and the logic network can contain a total of 1/3 nodes. NBE¢°¢° will seamlessly route NMEA messages between the two network segments, making them a logical NMEA network. High-priority-based message routing ensures that high-priority messages always take priority over low-priority messages, thereby achieving predictable and reliable network operations.

Maretron NMEA 2000 Network Bus Extender Related ProductsMaretron Micro Tee
Maretron Micro Double Ended Cord - 0.5M
Maretron Micro Double Ended Cord - 1 Meter
Maretron Micro Double Ended Cord - 3M
Maretron Micro Double Ended Cord - 6 meters
Maretron Micro Double Ended Cord - 2 metersres
Maretron Micro Double Ended Cord - 4 meters
Maretron Micro Double Ended Cord 5 meters

Frequently Asked Questions (FAQ) about Network Bus Extension Maretron NMEA 2000 Who is the Maretron?
How to describe the Maretron NMEA 2000 network bus extender?
What is the product data interface?
Who is the Maretron ? Maretron products, from GPS receivers to transducers, are designed to withstand the harshest marine conditions. Maretron carefully protects all of our electronic devices, even equipment below deck, in waterproof enclosures to ensure years of reliable performance. Superior engineering, maximum precision, consistent reliability: three reasons why Maretron products are among the best in the world. How to describe the Maretron NMEA 2000 network bus extender? The NBE100 (Network Bus Extender) from Maretron allows you to extende the maximum number of nodes, network network length and cumulative tap length of any NMEA 2000 network. NBE resolves bus errors and other electrical problems caused by exceeding any of these limits, and facilitates the design of large networks. The NMEA¢°¢°¢° network allows up to ¢µ¢° nodes on a single network, the maximum network trunk length is ¢°¢°m, and the maximum cumulative discharge length is ¢·¢¸m. If your network exceeds any of these specifications, simply disconnect the intermediate network and connect both ends to the NBE via additional termination resistors. This will divide the network into two electrical parts. Each electrical part can contain up to 1/3 nodes, and the logic network can contain a total of 1/3 nodes. NBE¢°¢° will seamlessly route NMEA messages between the two network segments, making it a logical NMEA networkeu. High-priority-based message routing ensures that high-priority messages always take priority over low-priority messages, thereby achieving predictable and reliable network operations. What is the Product Data Interface? NMEA 2000

Save $48 when you purchase the Maretron NMEA 2000 Network Bus Extender for only $289 from NVN Marine! Same day dispatch before 3 p.m. Maretron NMEA 2000 Network Bus Extender Technical Specifications

Type:	Marine Navigation & Instruments \| NMEA Cables and Sensors
Seller:	Maretron
Weight:	0.7 lbs
Data interface:	NMEA 2000
Product Manual:	Download PDF

Prolonga user reviewsMaretron NMEA 2000 Network Bus ExtenderMaretron NMEA 2000 Network Bus Extender Shipping & Return

Shipping Weight:	0.7 lbs
Box sizes:	1.00 (h) x 4.00 (w) x 6.00 (w)
Cubic feet:	24.0
Returnable:	Yes
USPS First Class:	Yes
P65:	Yes

For For detailed shipping terms, please review our Shipping Policy and you can find our Return & Refund Policy here.