Maretron Pressure Transducer 0 to 3 PSI Marine Navigation & Instruments
Maretron Fluid Pressure Sensor Transducers work with the Maretron FMP100 which will adapt up to six pressure transducers to the NMEA 2000 networkMaretron PT03PSI01 Attributes
Pressure Transducer 0 to 3 PSI - for FPM100 Fluid Pressure Monitor
This product can expose you to chemicals including NICKEL (METALLIC), recognized by the State of California may cause cancer. For more information,
0 to 3 PSI Pressure Sensor - used for FPM100 Fluid Pressure Monitor Warning: This product can expose you to to chemical substances known in the country, in particular nickel (METALLIC)...
Compatible fluids/gases:
- Refrigerant
- Engine oil
- Diesel
- Hydraulic fluid
- Brake fluid
- Water
- Waste water
- Hydrogen
- Nitrogene
- Air
- -5° C to 60°C
- -25°C to 125° C
- 29 PSI (2 bar)
- 1.4305 (303 stainless steel), thick layer on Al2O3 ceramic sensor (96%), O-ring FKM 70 Sh
- IP67, PVC (PA6-3 cable gland)
- 4.9 feet (1.5 m)
- 4 g (10 – 2000 Hz)
- 50 g/8 ms
- EN 61000-6-3
- EN 61000-6-2
- 95% relative
- 110 g
PRODUCT ID: 40840
SKU: NVN-40840
CSKU: CWR-40840
REWRITE: 51951-maretron-pressure-transducer-0-to-3-psi
MPN: PT-0-3PSI -01
UPC: 873804002934
ASIN: B0108LB74I
WSKU: MARPT03PSI01
SSKU: MRTN-PT-0-3PSI-01
KSKU: MRTPT03PSI01
br>GSKU: PT-0-3PSI-01
MSKU:
LSKU:
NAME: Maretron pressure transducer 0 to 3 PSI
NAME_EX: MARETRON PRESSURE TRANSDUCER 0 TO 3 PSI
PTITLE: Maretron Pressure Transducer 0 to 3 PSI
TYPE: Navigation & Marine Instruments | NMEA Cables and Sensors
SELLER: Maretron
ELECTRONICS> MARINE ELECTRONICS> Marine Chartplotters and GPS
Sports
Maretron Pressure Transducer 0 to 3 PSI
Sports
Gtags:
GSpecs:
Maretron 0 to 3 PSI Pressure Transducer Product Description Maretron fluid pressure sensor transducers work with the Maretron FMP100 which will adapt up to six pressure transducers to the NMEA 2000 network
Maretron PT03PSI01 Attributes
0 to 3 PSI Pressure Transducer - for FPM100 Fluid Pressure Monitor
This product may expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information,
0 to 3 PSI Pressure Sensor - used for FPM100 Fluid Pressure Monitor Warning: This product can expose you to to chemical substances known in the country, in particular nickel (METALLIC)...
Compatible fluids/gases:
- Coolant
- Engine Oil
- Diesel
- Hydraulic fluidthat
- Brake fluid
- Water
- Wastewater
- Hydrogen
- Nitrogen
- Air
- -5° C at 60°C
- -25°C to 125°C
- 29 PSI (2 bar)
- 1.4305 (303 stainless steel), thick film on Al2O3 ceramic sensor (96%), FKM 70 Sh O-ring
- IP67, PVC (PA6-3 cable gland)
- 4.9 feet (1.5 m)
- 4g (10 – 2000 Hz)
- 50 g/8 ms
- EN 61000-6-3
- EN 61000-6-2
- 95% relative
- 110g
Frequently Asked Questions (FAQ) about the Maretron 0 to 3 PSI Pressure Transducer Who is the Maretron?
How to describe the Maretron 0 to 3 PSI Pressure Transducer?
What is the exterior color of the product?
br/> In which country is this product manufactured?
What are the dimensions and weight of the Maretron 0 to 3 PSI pressure transducer?
What is the connector type of the product?
What is the length of the cable?
What is the product communication method?
What are the manufacturer's notes on the Maretron 0 to 3 PSI pressure transducer?
Who is the Maretron? Maretron products, from GPS receivers to transducers, are designed to withstand the harshest marine conditions. Maretron carefully protects all ourelectronic devices, even equipment below deck, in waterproof enclosures to ensure years of reliable performance. Superior engineering, maximum precision, consistent reliability: three reasons why Maretron products are among the best in the world. How to describe the Maretron 0 to 3 PSI pressure transducer? The Maretron fluid pressure sensor transducers work with the Maretron FMP100 which will adapt up to six pressure transducers to the NMEA 2000 network. What is the exterior color of the product? Silver
- In which country is this product made? ChinaWhat are the dimensions and weight of the Maretron 0 to 3 PSI pressure transducer? 5 (l) X 1 (h) X 4 (w) inches and the weight is: 0.45 lbs. What is the connector type of the product? Bare wireHow long is the cable? 1 m (3.3')What is the product communication method? AnalogWhat are the manufacturer's notes cabout the Maretron 0 to 3 PSI pressure transducer? The Maretronfluid pressure sensor transducers work with the MaretronFMP100 which will adapt up to six pressure transducers to the NMEA 2000 network
Save $27when you purchase the Maretron 0 to 3 PSI Pressure Transducerfor only $132at NVN Marine! Same day dispatch before 3 p.m. Maretron 0 to 3 PSI Pressure Transducer Technical Specifications
| Type: | Marine Navigation & Instruments | NMEA Cables and Sensors |
|---|---|
| Supplier: | Maretron |
| Weight: | 0.1 lbs |
| Product manual: | Download PDF |
| Product installation: | Download PDF |
| Shipping Weight: | 0.1 lbs |
|---|---|
| Box sizes: | 1.00 (h) x 4.00 (w) x 4.00 (w) |
| Cubic feet: | 16.0 |
| Returnable: | Yes |
| USPS First Class: | Yes |
| P65: | Yes |
For shipping conditions detailed, please see our shipping policy and you can find our return and refund policy here.
