Maretron SIM100 Switch Indicator Module Marine Navigation & Instruments
Maretron's switch indicator module monitors switch closing devices, including but not limited to safety equipment (e.g. heat, smoke, carbon monoxide detectors , explosive vapors), safety systems (e.g. movement, vibration, broken glass, doors and ports). magnetic hole switches) and vessel monitoring equipment (e.g. closed/open valve, high water bilge). The SIM100 continuously monitors these switch closing devices and broadcasts information over the NMEA 2000 network about the status of the switch so that the crew can be alerted to potential conditions or problems that warrant further investigation .
Advanced features of the SIM100 include the ability to detect whether or not power has been disconnected from the monitored device or if signal wires have been disconnected due toe corrosion, tampering or any other reason (if the monitored device is equipped with one).
With the SIM100, you can be assured that critical sensors are powered, that the wires of signal are connected and that all safety, security and vessel functions are under constant monitoring. The SIM100 output information is then displayed with networked NMEA 2000 equipment such as Maretron's dedicated DSM250 or DSM410 displays or with NMEA 2000 compatible software such as Maretron's N2KView.
Better Again, the SIM100 is NMEA 2000. certified so you can view all switch indicator states anywhere on the vessel using a compatible NMEA 2000 display. The SIM100 is a key component of Maretron's N2KView vessel monitoring and control system.
*The SIM100 requires configuration if two or more DCR100s, RIM100s or SIM100s exist on a single network (Maretron DSM250 ,DSM410, USB100 or IPG100 required for configuration)
SIM100 Switch Indicator Module
Maretron Switch Indicator Module monitors switch closure devices, including but not limited to safety equipment (heat, smoke, carbon monoxide, explosive vapor detectors), safety systems (motion, vibration, glass breakage , door and hole magnetic switches) and ship monitoring equipment (closed/open valve, high water bilge). The SIM100 continuously monitors these switch closure devices and broadcasts information from the NMEA 2000 network about the status of the switch so that the crew can be alerted to potential conditions or issues that warrant further investigation. Advanced features of the SIM100 include the ability to detect if power has been removed from the monitored device or if signal wires have been deactivated.connected due to corrosion, tampering or any other reason (if the monitored device is equipped with one). . With the SIM100 you can be assured that the circular sensors are powered, the signal wires are connected and all safety, security and vessel functions are under constant monitoring.
Features :
Specifications:
- Heat detectors
- Smoke detectors
- Smoke detectorse carbon monoxide
- Gas detectors
- Bilge water detectors
- Magnetic switches
- Window break detectors
- br>
- Clogged fuel filter detection (excessive vacuum)
- Switches magnetic door, hatch and porthole
This product can expose you to chemicals known to the State of California. cause cancer, birth defects, or other reproductive harm. For more information,
Whether you're a professional or someone who enjoys cruising, you can get the most out of your boat and time on the water! Based on the principle of taking into account the highest standards of quality and reliability, each... -switching indicator module
MPN: SIM100-01
UPC: 873804000190
ASIN: B001J5ORK4
WSKU: MARSIM10001
SSKU: MRTN-SIM100-01
KSKU: MRTSIM10001
GSKU: SIM100-01
MSKU:
LSKU:
NAME: Maretron SIM100 Switch Indicator Module
EX_NAME: MARETRON SIM100 SWITCH INDICATOR MODULE
PTITLE: Maretron SIM100 Switch Indicator Module
TYPE: Navigation and maritime instruments | NMEA Cables and Sensors
SELLER: Maretron
ELECTRONICS> MARINE ELECTRONICS> Marine Chartplotters and GPS
Sports
Maretron Switch Indicator Module Maretron SIM100-01 Switch Indicator, NMEA 2000
Maretron SIM100 Switch Indicator Module
Sports
Gtags:
| Switch |
GSpecs:
Maretron SIM100 Switch Indicator Module Product Description
The Maretron Switch Indicator Module monitors switch closing devices, including but not limited to safety equipment (e.g. heat detectors, smoke, carbon monoxide, explosive vapors), safety systems (e.g. movement, vibration). , broken glass, magnetic door and window switches) and vessel monitoring equipment (e.g. valve closed/open, high water bilge). The SIM100 continuously monitors these switch closing devices and broadcasts information over the NMEA 2000 network about the status of the switch so that the crew can be alerted to potential conditions or problems that warrant further investigation .
Advanced features of the SIM100 include the ability to detect whether or not power has been disconnected from the monitoring devicedamaged or if the signal wires have been disconnected due to corrosion, tampering or any other reason (if the monitored device is equipped with one).
With the SIM100 you can be ensured that critical sense vessels are powered, signal cables are connected and all safety, security and vessel functions are under constant monitoring. The SIM100 output information is then displayed with networked NMEA 2000 equipment such as Maretron's dedicated DSM250 or DSM410 displays or with NMEA 2000 compatible software such as Maretron's N2KView.
Better Again, the SIM100 is NMEA 2000. certified so you can view all switch indicator states anywhere on the vessel using a compatible NMEA 2000 display. The SIM100 is a key component of Maretron's N2KView vessel monitoring and control system.
*The SIM100 requires configuration if two or more DCsR100, RIM100 or SIM100 exist on a single network (Maretron DSM250, DSM410, USB100 or IPG100 required for configuration)
SIM100 Switch Indicator Module
Maretron's Switch Indicator Module monitors switch closing devices, including but not limited to safety equipment (heat, smoke, carbon monoxide, vapor detectors explosives), security systems (magnetic switches for movement, vibration, glass breakage, door and porthole) and ship monitoring equipment (closed/open valve, high water hold). The SIM100 continuously monitors these switch closure devices and broadcasts information from the NMEA 2000 network about the status of the switch so that the crew can be alerted to potential conditions or issues that warrant further investigation. Advanced features of the SIM100 include the ability to detect whether alPower supply has been cut off from the monitored device or the signal wires have been disconnected due to corrosion, tampering, or any other reason (if the monitored device is so equipped). . With the SIM100 you can be assured that the circular sensors are powered, the signal wires are connected and all safety, security and vessel functions are under constant monitoring.
Features :
Specifications:
- Detecheat detectors
- Smoke detectors
- Carbon monoxide detectors
- Gas detectors
- Bilge water detectors
- Magnetic switches
- Glass break detectors
- Filter detection clogged fuel (excessive vacuum)
- Magnetic door, hatch and window Switches
This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,
Whether you're a professional or someone who enjoys cruising, you can get the most out of your boat and of your time on the water!Based on the principle of taking into account the highest standards of quality and reliability, every...
Maretron Switch Indicator ModuleSIM100 Related ProductsMaretron Micro Tee
Maretron Micro Double Ended Cord - 0.5M
Maretron Micro Double Ended Cord - 1 Meter
Maretron Micro Double Ended Cord - 3M
Micro Double Ended Cord Maretron Double Ended Micro Lead - 6 Meters
Maretron Double Ended Micro Lead - 2 Meters
Maretron Double Ended Micro Lead - 4 Meters
Maretron Double Ended Micro Lead 5 Meters
Monoxide Detector carbon Maretron f/SIM100-01
Maretron BHW100 High Bilge Water Detector
Frequently Asked Questions (FAQ) about Maretron SIM100 Switch Indicator Module Who is the Maretron?
How to describe the Maretron SIM100 switch indicator module?
What is the exterior color of the product?
In which country is this product manufactured?
What are the dimensions and weight of the Maretron SIM100?t switching indicator module?
What is the connector type of the product?
/> Whatst the product's communication method?
What are the manufacturer's notes on the Maretron SIM100 Switch Indicator Module?
Who is Maretron? Maretron products, from GPS receivers to transducers, are designed to withstand the harshest marine conditions. Maretron carefully protects all of our electronic devices, even equipment below deck, in waterproof enclosures to ensure years of reliable performance. Superior engineering, maximum precision, consistent reliability: three reasons why Maretron products are among the best in the world. How to describe the Maretron SIM100 Switch Indicator Module?
Maretron's Switch Indicator Module monitors switch closing devices, including but not limited to safety equipment (e.g., heat, smoke , carbon monoxide, explosive vapor detectorss), security systems (e.g. motion detectors, vibration, broken glass, magnetic door and porthole switches) and ship monitoring equipment (e.g. closed/open valve, high water bilge). The SIM100 continuously monitors these switch closing devices and broadcasts information over the NMEA 2000 network about the status of the switch so that the crew can be alerted to potential conditions or problems that warrant further investigation .
Advanced features of the SIM100 include the ability to detect whether or not power has been disconnected from the monitored device or if signal wires have been disconnected due to corrosion, tampering or any other reason (if the monitored device is so equipped).
With the SIM100, you can be assured that critical sensors are powered, signal wires are connected, and all safety functions,The safety and security of the ship are under constant surveillance. The SIM100 output information is then displayed with networked NMEA 2000 equipment such as Maretron's dedicated DSM250 or DSM410 displays or with NMEA 2000 compatible software such as Maretron's N2KView . .
Most importantly, the SIM100 is NMEA 2000 certified, allowing you to view all switching indicator states anywhere on the vessel using a compatible NMEA 2000 display . The SIM100 is a key component of Maretron's N2KView vessel monitoring and control system.
*The SIM100 requires configuration if two or more DCR100, RIM100 or SIM100 exist on a single network. (Maretron DSM250, DSM410, USB100 or IPG100 required for configuration)
What is the exterior color of the product? Black- In which country is this product made? United StatesWhat are the dimensions and weight of the indicator moduleMaretron SIM100 switching eur? 7 (l) X 4.5 (h) X 9.5 (w) inches and the weight is: 1.36 lbs. What is the connector type of the product? Bare wireWhat is the product communication method? NMEA 2000What are the manufacturer's ratings for the Maretron SIM100 Switch Indicator Module?
Maretron's Switch Indicator Module monitors switch closing devices, including but not limited to safety equipment (e.g. heat detectors , smoke, carbon monoxide, explosive vapors), safety systems (e.g. movement, vibration, broken glass, magnetic door and window switches) and ship monitoring equipment (e.g. valve closed/open, high water level). bilge). The SIM100 continuously monitors these switch closing devices and broadcasts information over the NMEA 2000 network about the status of the switchtor so that the crew can be alerted to potential conditions or issues that warrant further investigation.
Advanced features of the SIM100 include the ability to detect whether or not power has been disconnected from the monitored device or if the signal wires have been disconnected due to corrosion, tampering or any other reason (if the monitored device is equipped with one).
With the SIM100, you can be assured that critical sensors are powered, signal wires are connected and all safety, security and vessel functions are under constant monitoring. SIM100 output information is then displayed connected with networked NMEA 2000 equipment such as Maretron's dedicated DSM250 or DSM410 displays or with NMEA 2000 compatible software such as Maretron's N2KView .
Better yet, the SIM100 is NMEA 2000 certified, which gives you allows you to view allhe switch indicator states anywhere on the vessel using a compatible NMEA 2000 display. The SIM100 is a key component of Maretron's N2KView vessel monitoring and control system.
*The SIM100 requires configuration if two or more DCR100, RIM100 or SIM100 exist on a single network. (Maretron DSM250, DSM410, USB100 or IPG100 required for setup)
Save $49when you purchase the Maretron SIM100 Switch Indicator Modulefor only $295from NVN Marine! Same day dispatch before 3 p.m. Maretron SIM100 Switch Indicator Module Technical Specifications
| Type: | Marine Navigation & Instruments | NMEA Cables and Sensors |
|---|---|
| Seller: | Maretron |
| Weight: | 1.3 lbs |
| User Guide: | Downloade PDF |
| Product Manual: | Download PDF |
| Product brochure: | Download PDF |
| Product installation: | Download PDF |
| Shipping weight: | 1.3 lbs |
|---|---|
| Sizes of boxes: | 5.00 (h) x 7.00 (w) x 10.00 (w) |
| Cubic feet: | 350.0 |
| Returnable: | Yes |
| P65: | Yes |
For detailed shipping policy, please see our shipping policy and you can find our return and refund policy here.
- Maretron SAE 5-Bolt Focus Tube with Deadband Eliminator
- Maretron RIM100 operation indicator module
- Maretron rectangular magnetic switch for indoor use
- Maretron RAA100 Rudder Angle Adapter
- Maretron PX0852 Waterproof USB Cover for IPG100
- Maretron PTS-0-5-0PSI-01 - Submersible pressure transducer 0 to 5.0 Psi
- Maretron PT-V-0-1BAR-01 - Vacuum pressure transducer
