Mastervolt Mac Plus 12/24-30 + CZone Electrical

Mac Plus 12/24-30 + CZone

Improve the service battery

Too often, the batteries service are not working they are not getting the charge they need. This is a problem made worse by smart alternators and start/stop systems, which result in slow and insufficient charging. The Mac Plus DC-DC charger solves this problem by providing fast, safe and constant charging to the service battery. And, by knowing when the motor is running and providing load, users can be confident that the Mac Plus will never drain a starter battery.

Proven Mastervolt quality

Users have peace of mind knowing they have the best on board. Thanks to the proven Mastervolt 3-step+ charging algorithm, the Mac Plus provides fast and easy charging, even for completely discharged batteries.

A robust design withstands even the harshest conditions.s more difficult, with charging optimized according to battery temperature. and a high-quality aluminum housing to provide superior protection against dust and water ingress. The energy-efficient design also allows the Mac Plus to run quietly and fan-free.

Total power flexibility

With a wide operating range DC input, the Mac Plus supports all DC sources and can charge two batteries from a single alternator or charger. It supports a full range of battery chemistries and types, including lithium. It also works perfectly with modern alternators such as Euro 5 and 6, ensuring proper charging by providing consistent power, even when the alternator is idle.

A parallel configuration of up to ten units will provide more than 100 amps. Advanced high frequency technology withc modern microprocessors ensure minimal power loss when switching from 12V to 24V and vice versa.

Analog voltage sensing ports are also available to compensate for voltage drops and maintain a charge

Superior monitoring and control

Compatibility with CZone, NMEA 2000 and MasterBus provides truly superior monitoring and control and ensures that Mac Plus easily integrates into complete systems. Get the best possible performance through various high-quality controllers and MOSFETs. And easily configure the Mac Plus via MasterAdjust, the CZone configuration tool, or even via the built-in DIP switches.

Features:

Fast and safe charging, even on short journeys
Fanless design for quiet operation
Suitable for Flooded, Gel, AGM and Li-Ion (including LiFePO) batteries4)
Recharges even completely exhausted batteries
Engine running detection protects the starter battery
Adjustable current limits to meet Euro 5 requirements /6
Voltage stabilization protects sensitive equipment, lights and loads
Parallel operation to obtain load capacities well above 100 A
MasterBus, CZone and NMEA 2000 are compatible for intelligent system monitoring and automation
Temperature compensation and voltage sensing for optimal chargingg result
E-Mark/R10 certification for mobile applications
Power mode provides stable power for sensitive loads
Robust connections for easy installation and quick configuration via DIP switches

Specifications:

Battery temperature sensor: yes, included
Rechargeable voltageBattery Detection: Yes

General Specifications:

Status Indicator: Yes, 3 Color LED
Communication protocol: MasterBus, CZone and NMEA 2000
Output voltage: 20-30 V
Rated output voltage: 24 V
Stabilization of output voltage: 2% at extremes of temperature, load and input
Output voltage ripple (peak-peak): Max. 1%
Max. Output Power: 725W
Rated Output Power: 675W
Max. Output current: 30 A
Output load current (3-step mode): 30 A
Rated input voltage: 12 V
Range of Input Voltage: 10- 16VMax. Input current: 50 A
Galvanic isolation: No
Voltage limited: Yes
Efficiency:> 95% (at nominal input voltage, full charge) ; Peak 97
Parallel configuration: Yes
Alarm contact: Yes, via MasterBus
Power supplyMasterBus ion: No
Motor run signal input: Yes (active high/active low)
DIP switches: yes, for basic configuration
Dimensions, H x W x D: 255 x 165 x 66 mm (10.0 x 6.5 x 2.6 in)
Weight: 2 kg (4.4 lb)
Conformity: CE, E-Mark, SAE J1171 and ISO 8846 Protection against ignition

Technical specifications:

No load consumption: <2 mA
Charging characteristic: 3 traps+
Battery types: Flooded, Gel, AGM, spiral, Lithium Ion, traction, defined by user
3-stage charging option: Yes (DIP switch settings)
DC consumption: <5 mA
Connections: 3 M8 terminals for diameters of cable from 10 to 50 mm², (positive input, positive output, common negative connection) 8-pole screw connection for cable diameters from 0.75 to 1.5 mm² (remote on/off, temperature sensor, voltage measurement
Rangee temperature (room temp.): -25 degrees C to 60 degrees C; derating> 40
Cooling: natural cooling
Protection degree: IP23
Protections: Overload, overheating, DC short circuit, reverse polarity (fuse)
MasterBus Compatible: Yes

PRODUCT ID: 102659
SKU: NVN-102659
CSKU: CWR-102659
REWRITE: 113770-mastervolt-mac-plus-12-24-30 -czone
MPN: 81205105
UPC:
ASIN:
WSKU: MAS81205105
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: MASTERVOLT MAC PLUS 12/12-50 + CZONE
EX_NAME:
PTITLE: Mastervolt Mac Plus 12/24-30 + CZone
TYPE: Electric Battery Chargers
SELLER: Mastervolt
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Gtags:

GSpecs:

Mastervolt Mac Plus 12/24-30 + CZone Product description

Mac Plus 12/24-30 + CZone

Boost the service battery

Too often, service batteries do not receive the charge they need. This is a problem made worse by smart alternators and start/stop systems, which result in slow and insufficient charging. The Mac Plus DC-DC charger solves this problem by providing fast, safe and constant charging to the service battery. And, by knowing when the motor is running and providing load, users can be confident that the Mac Plus will never drain a starter battery.

Proven Mastervolt quality

Right designobuste resists even the harshest conditions, with charging optimized according to battery temperature. and a high-quality aluminum housing to provide superior protection against dust and water ingress. The energy-efficient design also allows the Mac Plus to run quietly and fan-free.

Total power flexibility

A parallel configuration of up to ten units will provide more than 100 amps. TechAdvanced high frequency technology with modern microprocessors ensures minimal power loss when switching from 12V to 24V and vice versa.

Analog voltage sensing ports are also available to compensate for voltage drops and maintain proper charging.

Superior monitoring and control

Compatibility with CZone, NMEA 2000 and MasterBus provide truly superior monitoring and control and ensure that Mac Plus integrates easily into complete systems. Get the best possible performance through various high-quality controllers and MOSFETs. And easily configure the Mac Plus via MasterAdjust, the CZone configuration tool, or even via the built-in DIP switches.

Features:

Fast and safe charging, even on short journeys
Fanless design for quiet operation
Suitable for batteries iundated, Gel, AGM and Li-Ion (including LiFePO4)
Recharges even completely exhausted batteries
Engine running detection protects the starter battery
Adjustable current limits to meet Euro 5/6 requirements
Voltage stabilization protects sensitive equipment, lights and loads
Parallel operation to achieve much higher load capacities at 100 A
MasterBus, CZone and NMEA 2000 are compatible for intelligent system monitoring and automation
TemperatureTemperature compensation and voltage detection for optimal charging result
E-Mark/R10 certification for mobile applications
Power mode provides stable power for sensitive loads
Heavy -Service connections for installation easy and quick configuration via DIP switches

Specifications:

Battery temperature sensor: Yes, included
Battery voltage detection: Yes

General specifications:

Status indicator: Yes, 3 LED colors
Communication protocol: MasterBus, CZone and NMEA 2000
Output voltage: 20-30 V
Rated output voltage: 24 V
Output voltage stabilization: 2% at extreme temperatures, loads and inputs
Recharge voltage ripple: output (peak-peak): Max. 1%
Max. Output Power: 725W
Rated Output Power: 675W
Max. Output current: 30 A
Output load current (3-step mode): 30 A
Rated input voltage: 12 V
Rank of input voltage: 10-16V
Max. Input current: 50 A
Galvanic isolation: no
Voltage limited: yes
Efficiency:> 95% (at nominal input voltage, full charge) ; Peak 97
Configurationparallel ion: Yes
Alarm contact: Yes, via MasterBus
MasterBus power supply: No
Motor running signal input: Yes (active high /active low)
DIP switches: yes, for basic configuration
Dimensions, H x W x D: 255 x 165 x 66 mm (10.0 x 6.5 x 2.6 inches)
Weight: 2 kg (4.4 lbs)
Compliance: CE, E-Mark, SAE J1171 and ISO 8846 Ignition protection

Technical specifications:

No-load consumption: <2 mA
Charging characteristic: 3 traps+
Battery Types: Flooded, Gel, AGM, Spiral, Lithium Ion, Traction, User Defined
3-stage charging option: Yes (DIP switch settings)
DC consumption: <5 mA
Connections: 3 M8 terminals for cable diameters from 10 to 50 mm², (positive input, positive output, negative joint connection) 8-pole screw connection for cable diameters from 0.75 to 1.5 mm² (remote on/off, temperature sensor, voltage measurement
Temperature range (ambient temperature): -25 degrees C to 60 degrees C; derating> 40
Cooling : natural cooling
Protection degree: IP23
Protections: overload, overheating, DC short circuit, reverse polarity (fuse)
MasterBus compatible: Yes

Save $295 when you purchase the Mastervolt Mac Plus 12/24-30 + CZone for only $422 from NVN Marine! Same day shipping before 3pm Mastervolt Mac Plus 12/24-30 + CZone Videos Mastervolt Mac Plus 12/24-.> Type:

Electric battery chargers

Supplier:

Mastervolt

Charger Input - Voltage:

12v

Charger output - Amps:

30a

S voltageCharger output:

20-30V

Product manual:

Download PDF

Mastervolt Mac Plus 12/24-30 + CZone User ReviewsMastervolt Mac Plus 12/24-30 + CZone Shipping and Returns