Mastervolt MacPlus 12/48-15 Electrical

Mac Plus 12/48-15

Boost your service battery

Too often, service batteries are not working getting the charge they need. This is a problem made worse by smart alternators and start/stop systems, which result in slow and insufficient charging. The 48V and 36V Mac Plus solve this problem. With all-new bi-directional technology, the Mac Plus can use either side as an input or output, providing reliable, consistent charging to the service and starter batteries.

Proven Mastervolt quality

The Mac Plus uses the proven Mastervolt 3-step+ charging algorithm, providing fast and easy charging, even for completely discharged batteries. By knowing when the engine is running and providing a charge, you can also be sure that the Mac Plus will never drain your battery from time to time.marring.

A robust design withstands even the harshest conditions, with optimized battery temperature. High quality aluminum charging and housing to provide superior protection against dust and water ingress. The energy-efficient design also allows the Mac Plus to run quietly and fan-free.

Total power flexibility

With a wide operating range DC input, the Mac Plus allows all DC sources and can charge two batteries from a single alternator or charger. It supports a full range of battery chemistries and types, including lithium. It also works perfectly with modern alternators such as Euro 5 and 6, ensuring proper charging by providing consistent power, even when the alternator is idle.

A parallel configuration of up to ten units will provide more than 100 amps. Et Advanced high frequency technology with modern microprocessors ensures minimal power loss when switching from 36/48 V to 12/24 V and vice versa.

Analog voltage sensing ports are also available to compensate for voltage drops and maintain proper charging. .

Superior monitoring and control

Compatibility with CZone, NMEA 2000 and MasterBus provides truly superior monitoring and control and ensures that Mac Plus s Easily integrated into complete systems. Get the best possible performance through various high-quality controllers and MOSFETs. And easily configure the Mac Plus via MasterAdjust, the CZone configuration tool, or even via the built-in DIP switches.

Features:

Bi-directional technology
Get 48V or 36V power from a single unit
Fast, safe charging, even pfor short journeys
Fanless design for quiet operation
Suitable for flooded, gel, AGM and Li-Ion (including LiFePO4) batteries
Recharges even completely exhausted batteries
Motor operation detection protects the battery starter
Adjustable current limits to meet Euro 5/6 requirements
The Voltage stabilization protects sensitive equipment, lights and loads
Parallel operation for load capacities well above 100 amps
MasterBus, CZone and NMEA 2000 compatible,with intelligent system monitoring and automation
Temperature compensation and voltage detection for optimal charging result
E-Mark/R10 certification for mobile applications
Power supply modes offer stable power for sensitive loads
Robust connections for easy installationEasy ation and quick configuration via DIP switches

General specifications:

Battery voltage detection: Yes
Status indicator: Yes, dual 3-color LED
Communication protocol: MasterBus, CZone and NMEA 2000
Output voltage: 30-60 V DC
Rated output voltage: 36/48 V
Output voltage stabilization: 2% at extreme temperatures, loads and inputs
Power ripple: output voltage (peak-peak): Max. 1%
Max. Output Power: 900W
Max. output current: 15A
Rated input voltage: 12V DC
Input voltage range: 8-16V
Max. input current: 60 A
Galvanic isolation: No
Efficiency:> 95% (at input nom. vvoltage, full load); 97% peak
Parallel configuration: Yes, up to 4
Alarm contact: Yes, via MasterBus, CZone, DIP switch or commremote controller
Motor runs signal input: Yes (active high/active low)
DIP switches: Yes, for basic configuration
Dimensions , HxWxD: 255x165x66 mm, 10.0 x 6.5 x 2.6 inches
Weight: 2kg, 4.4lbs
Conformity: CE, E-Mark, SAE J1171, ISO 8846, ignition protection, ABYC and UKCA

Technical specifications:

Battery types: Gel , AGM, Lithium Ion, user defined
Power consumption: <5 mA, <10 mA in CZone, <1 mA in MasterBus
Temperature range (ambient temp. ): - 25°C to 60°C; derating> 40°C/104°F
Cooling: natural cooling
Protection degree: IP23
Protections: overload, overheating, DC short circuit, reverse polarity (fuse)

PRODUCT ID: 102913
SKU: NVN-102913
CSKU: CWR-102913
REWRITE: 114024-mastervolt -mac-plus-12-48-15
MPN: 81203205
UPC : 816882023446
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: MASTERVOLT MAC PLUS 12/48-15 + CZONE
NAME_EX:
PTITLE: Mastervolt Mac Plus 12/48-15
TYPE: Electric | Battery Chargers
SELLER: Mastervolt
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES

Gtags:

GSpecs:

Mastervolt Mac Plus 12/48-15 Product description

Mac Plus 12/48-15

Boost your service battery

Too often, service batteries do not receive the charge they need. This is a problem made worse by smart alternators and start/stop systems, which result in slow and insufficient charging. The 48V and 36V Mac Plus solve this problem. With all-new bi-directional technology, the Mac Plus can use either side as an input or output, providing reliable, consistent charging to the service and starter batteries.

Proven Mastervolt quality

The Mac Plus uses the proven Mastervolt 3-step+ charging algorithm, providing fast and easy charging, even for completely discharged batteries. By knowing when the motor is running and providing a load, you can also be sure that the Mac Plus will never drain your starter battery.

A robust design withstands even the harshest conditions, with optimized battery temperature. load and high quality Aluminum housing to ensure superior protection against dust and water penetration. The energy-efficient design also allows the Mac Plus to run quietly and fan-free.

Total power flexibility

A parallel configuration of ten unitsmaximum will provide over 100 amps. And advanced high-frequency technology with modern microprocessors ensures minimal power loss when switching from 36/48 V to 12/24 V and vice versa.

Analog voltage sensing ports are also available to compensate for voltage drops and maintain proper charging. .

Superior monitoring and control

Compatibility with CZone, NMEA 2000 and MasterBus provides truly superior monitoring and control and ensures that Mac Plus easily integrates into complete systems. Get the best possible performance through various high-quality controllers and MOSFETs. And easily configure the Mac Plus via MasterAdjust, the CZone configuration tool, or even via the built-in DIP switches.

Features:

Bi-directional technology
Get 48V or 36V power from a single unity
Fast and safe charging, even during short journeys
Fanless design for quiet operation
Suitable for flooded, gel, AGM and Li batteries -Ion (including LiFePO4)
Recharges even completely depleted batteries
Motor operation detection protects battery starter
Adjustable current limits to respond meets Euro 5/6 requirements
Voltage stabilization protects sensitive equipment, lights and loads
Parallel operation to achieve much higher load capacities 100 As
MasterBus, CZone and NMEA 2000 compatible, with intelligent system monitoring and automation
Temperature compensation and voltage detection for optimal charging result
E-Mark /R10 certification for mobile applications
Power mode provides stable power for sensitive loads
ConnectRobust ions for easy installation and quick configuration via DIP switches

General specifications:

Voltage detection of the battery: Yes
Status indicator: Yes, dual 3-color LED
Communication protocol: MasterBus, CZone and NMEA 2000
Output voltage: 30 -60 V DC
Rated output voltage: 36/48 V
Output voltage stabilization: 2% at extreme temperatures, load and input.
Output voltage ripple (peak-peak): Max. 1%
Max. Output Power: 900W
Max. output current: 15A
Rated input voltage: 12V DC
Input voltage range: 8-16V
Max. Input current: 60 A
Galvanic isolation: No
Efficiency:> 95% (at nominal input voltage, full load); 97% peak
Parallel configuration: Yes, up to 4
Alarm contact: Yes, via MasterBus, CZone, DIP switch or remote switch
Motor runs signal input: Yes (active high/active low)
DIP switches: Yes, for basic configuration
Dimensions, HxWxD: 255x165x66 mm, 10.0 x 6.5 x 2.6 inches
Weight: 2 kg, 4.4 lbs
Compliance: CE, E-Mark, SAE J1171, ISO 8846, ignition protection, ABYC and UKCA

Technical specifications:

Battery types: Gel, AGM, Lithium Ion, user defined
Power consumption: <5 mA, <10 mA in CZone, <1 mA in MasterBus
Temperature range (ambient temp): - 25°C to 60°C; derating> 40°C/104°F
Cooling: natural cooling
Protection degree: IP23
Protections: overload, overheating, DC short circuit, reverse polarity (fuse)

Mastervolt Mac Plus12/48-15 Related productsT-screen monitoring and control panelactile Mastervolt EasyView 5
Mastervolt Battery Temperature Sensor - 6M

Save $126 when you buy the Mastervolt Mac Plus 12 /48-15for only $548 at NVN Marine! Same day dispatch before 3 p.m. Mastervolt Mac Plus 12/48-15 Videos Mastervolt Mac Plus 12/48-15 Technical specifications

Type:	Electric \| Battery chargers
Supplier:	Mastervolt
Weight:	5.6 lbs
Charger Input - Voltage:	12 VDC
Charger Output - Amps:	15 A
Charger output voltage:	36/48V
Charger Guide user:	Download PDF
Product manual:	Download PDF
Product brochure:	Downloadsave PDF

Mastervolt Mac Plus 12/48-15 User ReviewsMastervolt Mac Plus 12/48-15 Shipping and Returns

Shipping Weight:	5.6 lbs
Box Sizes:	4.00 (h) x 9.00 (w) x 15.00 (w)
Cubic feet:	540.0
Recordable:	Yes