Maxwell HRC10 Horizontal Rope Chain Windlass - 12V Capstan 3/8" Chain 5/8" Rope Anchoring & Docking

HRC 10 Rope/Chain Series Above Deck Horizontal Rope/Chain Windlass Maxwell's all-new HRC10 Horizontal Series represents yet another step forward in performance and excellence in anchor handling. These horizontal, fully automatic rope/chain windlasses have been designed to meet the demands for use on larger vessels up to 16 meters (52 feet), which require a fully above deck installation system. The HRC10 perfectly handles ropes up to 16mm (5/8") and chains up to 10mm (3/8"), including thick rope-to-chain splicing. The modern appearance of the HRC10 Series retains the classic aesthetic of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors. All HRC Series windlasses feature Maxwell's unique wavy design chain plate. This rope/chain wheel breVeted incorporates two unique chain wheels. design concepts that significantly improve the handling and control of spliced rope/chain riding. The outer ribs of the deck are angled slightly forward, ensuring that the rope and chain are guided smoothly into the wheel during anchor retrieval. As the rope pulls through the wheel, the opposing inner ribs grip the rope in an undulating manner, securing it more firmly in a "wave pattern." action which is far superior to the traditional way of holding the rope with a blocking cleat. Not only does this corrugated design hold the rope more securely, but it is also gentler on the rope, leading to increased longevity of your anchor.

Maxwell HRC101012V Attributes

Mounting Type: Horizontal, above deck, w/ capstan
Maximum draw: 1,870 pounds
Maximum line speed: Non-commsingle
Size: 14.6''L x 12.1''W x 7.9''H; Weight: 25 lbs
Chain/Rope Size: 5/16'' chain; 9/16''-5/8'' rope
Rated voltage: 12 VDC
Motor power: 1200 watts

Maxwell HRC101012V Features and advantages

2-way design with mylar tweeter and midrange; The two-piece housing consists of a marine grade die-cast HA. Rugged anodized alloy front section and a tough, easily removable composite engine cover rear section
This two-piece waterproof housing allows quick and easy routine maintenance on deck; Simple bolt-on installation ensures quick and effortless installation and placement on deck.
The stainless steel pressure arm always exerts maximum control pressure on the wire (rope, splice or chain).
The new and revolutionary patented Wave Design chainring is able to adaptto a wide range of chain pitch differences, within specified chain diameters
The unique Maxwell "wrap-around" horizontal chainring ensures that more than 90° of the wheel is used, allowing greatly improved handling of rope and chain compared to competing designs.
The HRC10 works just as effectively with chain rods for those who desire the added security and holding power of an all-chain rod ground. chain anchor system.
The integrated chain pipe and huge hawse pipe throat running through the deck ensures easy entry of the rope/chain in and out of the anchor locker.
The cone type clutch/brake mechanism allows for manual "free fall" anchoring and emergency crank recovery of the rope and anchor if necessary.
Sealed oil bath and hard anodized marine grade alloy gearbox provide aHigh efficiency output drive via precision worm and worm wheel.
3 year limited warranty

Chain windlass Horizontal Rope HRC10 - 12V Capstan, 3/8" Chain, 5/8" Rope

Maxwell's HRC10 represents yet another breakthrough in performance and excellence in handling of anchors. The horizontal and fully automatic rope/chain windlasses have been designed to meet the demands for use on larger vessels up to 16 meters (52'), which require a fully above deck installation system.

The HRC10 handles 5/8" rope and 3/8" chain, including thick rope to chain splice. The modern appearance of the HRC10 retains the classic aesthetic of the previous Maxwell.dlasses horizontal victory, while incorporating design features years ahead of its competitors.

The HRC10 windlass is equipped with theMaxwell's unique Wave Design deck. The rope/chain wheel incorporates two unique design concepts that significantly improve the handling and control of the rope/chain spliced wheel. The outer ribs of the deck are angled slightly forward, ensuring that the cable and chain are guided smoothly into the wheel when retrieving the anchor.

As the rope pulls into the wheel, the opposing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a "wave pattern" action that is far superior to the traditional "blocking cleat" way of holding the rope. Not only does this Wave Design hold the rope more securely, but it is also gentler on the rope, resulting in increased longevity of your anchor.

Features:

Aesthetic design above deck, derived from the philosophy that form follows formfunction, summarizes the motorcycle and ride in a two-piece waterproof housing, saving space under deck
The 2-piece housing consists of a cast hard anodized alloy front section marine grade pressurized engine and a robust, easily removable composite aft section cover
The 2-piece watertight housing allows for quick and easy routine maintenance on deck
Simple "bolt-on" installation ensures quick and effortless deck installation and setup
Stainless steel pressure arm always exerts controlling pressure maximum on the wire (rope, splice or chain)
Wave Design chainring is capable of accommodating a wide range of chain pitch differences, within specified chain size diameters, suitable for use with the HRC10
The unique Maxwell "wrap-around" horizontal tabletop ensures an anglee of more than 90°. of the wheel is used, allowing for greatly improved handling of the rope and chain compared to competing designs
Works just as effectively with chain rods for those who desire a high level of safety and power increased hold of an integral chain anchor system
Integrated chain pipe and huge hawse pipe throat running through the deck ensures easy entry of the mounted rope/chain in and out of the anchor well
The conical type clutch/brake mechanism allows for manual "free fall" anchoring and emergency crank recovery of the rod and anchor if necessary
Sealed oil bath and a marine grade hard anodized alloy gearbox provides high efficiency output drive via a worm gear and impeller precision worm gear

Horizontal rope chain windlass HRC10-12V winch 3/8 "c5/8" hain Maxwells HRC10 rope represents another breakthrough in performance and excellence in anchor handling. This...
PRODUCT ID: 41655
SKU: NVN-41655
CSKU: CWR-41655
REWRITE: 52766-maxwell-hrc10-horizontal-rope-chain-windlass
MPN: HRC101012V
UPC: 1000000002638
ASIN: B00GFVLRK0
WSKU:
SSKU :
KSKU: MXWHRC101012V
GSKU:
MSKU:
LSKU:
NAME: Maxwell HRC10 Horizontal Rope Chain Windlass - 12V 3/8" Capstan Chain, 5/8" Rope, Rope 5/8"
TYPE: Anchoring & Mooring | Windlasses
SELLER: Maxwell
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES> MOORING & ANCHORING> ANCHOR WINDLASSES
Sports
Maxwell HRC10 Horizontal Rope Chain Windlass
Maxwell HRC Series HRC10-10 Horizontal Windlass with Capstan
Sports
Gtags:

GSpecs:

Maxwell HRC10 Horizontal Rope/Chain Windlass - 12V Capstan, 3/8" Chain, 5/8" Rope Product Description

HRC 10 Rope/Chain Series Horizontal Above Deck Rope/Chain WindlassAll Maxwell's new horizontal HRC10 series represents yet another advancement in anchor handling performance and excellence. These horizontal, fully automatic cable/chain windlasses have been designed to meet the demands for use on larger vessels up to 16 meters (52 feet), which require a fully above deck installation system. The HRC10 perfectly handles ropes up to 16mm (5/8") and chains up to 10mm (3/8"), including thick rope-to-chain splicing. The modern appearance of the HRC10 Series retains the classic aesthetic of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors. All windlassHRC series are equipped with Maxwell's unique wavy design chainring. This patented rope/chain wheel incorporates two unique chain wheels. design concepts that significantly improve the handling and control of the rope/chain splice are fitted. The outer ribs of the deck are angled slightly forward, ensuring that the cable and chain are guided smoothly into the wheel when retrieving the anchor. As the rope pulls into the wheel, the opposing inner ribs grip the rope in an undulating manner, thereby securing the rope more firmly in a "wave pattern" action that is far superior to the traditional "blocking cleat" manner for hold the rope. Not only does this corrugated design hold the rope more securely, but it is also gentler on the rope, leading to increased longevity of your anchor.

Maxwell HRC101012V Attributes

Mounting type: Horizontal, above deck, with capstan
Maximum draw: 1,870 pounds
Maximum line speed: Not reported
Size: 14.6''L x 12.1''W x 7.9''H; Weight: 25 lbs
Chain/Rope Size: 5/16'' Chain;9/16''-5/8 Rope ''
Rated voltage: 12 VDC
Motor power: 1,200 watts

Maxwell HRC101012V Features and Benefits

2-way design with mylar tweeter and midrange; The two-piece housing consists of a marine-grade hard-anodized die-cast alloy front section and a rugged, easily removable composite motor cover.
This two-piece waterproof housing allows for quick and easy installation on deck. , routine maintenance; Simple installatione by bolting ensures quick and effortless installation and placement on deck.
The stainless steel pressure arm always exerts maximum control pressure on the wire (rope, splice or chain) .
The new and revolutionary patented Wave Design chainring is able to accommodate a wide range of chain pitch differences, within specified chain diameters
The unique horizontal chainring Maxwell "wraparound" ensures that more than 90° of the wheel is used, allowing greatly improved rope and chain handling compared to competing designs.
The HRC10 works just as effectively with rods chain anchor for those who want the added security and holding power of a chain anchor system.
The integrated chain pipe and huge throat of the hawse pipe passing through the deck ensure easy entry of the rope/chain in and out of the mooring boxuillage.
The cone type clutch/brake mechanism allows for manual operation, "free fall" anchoring and emergency recovery of the rod and anchor crank if necessary.
Sealed oil bath and marine grade hard anodized alloy gearbox provide high efficiency output drive via precision worm and worm wheel.
Sealed oil bath and marine grade hard anodized alloy gearbox provide high efficiency output drive via precision worm and worm wheel. li>
3 year limited warranty

HRC10 Horizontal Rope Chain Windlass - 12V Capstan, 3/8" Chain, 5/8" Rope

The HRC10 handles 5/8" rope and 3/8" chain, including thick rope to chain splice. The modern appearance of the HRC10 maintains the classic aesthetic of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors.

The HRC10 windlass features Maxwell's unique Wave Design deck . The rope/chain wheel incorporates two unique design concepts that significantly improve the handling and control of the rope/chain spliced wheel. The outer ribs of the deck are angled slightly forward, ensuring that the cable and chain are guided smoothly into the wheel when retrieving the anchor.

As the rope pulls into the wheel, opposing inner ribs grip the hornof in an undulating manner, securing the rope more firmly in a "wave pattern" action that is far superior to the traditional "blocking cleat" way of holding the rope.e rope. Not only does this Wave Design hold the rope more securely, but it is also gentler on the rope, resulting in increased longevity of your anchor.

Features:

Aesthetic above deck design, derived from the philosophy that form follows function, encapsulates the motor and drive in a two-piece watertight enclosure, saving space below deck
The 2-piece housing consists of a die-cast marine grade hard anodized alloy front section and a robust, easily removable composite engine cover
The 2-piece waterproof housing allows for quick and easy routine maintenance on deck.
Simple bolt-on installatione guarantees quick and effortless installation and placement on deck
The stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain)
The Wave Design chainring is capable of accommodating a wide range of chain pitch differences, within specified chain size diameters, suitable for use with the HRC10
The unique Maxwell "wraparound" horizontal deck ensures that over 90° of the wheel is used, allowing for greatly improved rope and chain handling compared to competitive designs
Works just as effectively with chain rods for those who want the added security and holding power of a chain anchor system
The integrated chain tube and Huge, through-deck hawse pipe throat ensures easy rope/chain entry in and out of the anchor well
Cone type clutch/brake mechanism allows for manual "free fall" anchoring and emergency retrieval of the rod and anchor crank if necessary
Sealed oil bath and marine grade hard anodized alloy gearbox provide high efficiency output drive via precision worm and worm wheel

HRC10 Horizontal Rope Chain Windlass - 12V Winch 3/8" Chain 5/8" Rope Maxwells HRC10 represents another step forward in performance and handling excellence anchors. This...

Maxwell HRC10 Horizontal Rope Chain Windlass - 12V Capstan, 3/8" Chain, 5/8" Rope Related ProductsMaxwell P19007 Covered Foot Switch (White)
Maxwell P19001 Footswitch (Chrome Bezel)
Maxwell P19006 Covered Footswitch (Black)
Maxwell Remote Up/Down Control
Maxwell AA560 Rope Chain or Countall chain chain tester - Black
Maxwell AA150 chain and rope counter
Maxwell Anchor SS swivel shackle - 10-12 mm - 1500 kg
Maxwell wireless remote control with Rode counter
Maxwell 8" Emergency Crank for RC and Freedom Series Windlass
Maxwell High/Low Foot Switch - Compact, White

Frequently Asked Questions (FAQ) about the horizontal rope chain windlass Maxwell HRC10 - 12V capstan, 3/8" chain, 5/8" rope Who is the Maxwell?
How to describe the Maxwell HRC10 horizontal rope chain windlass - 12V capstan, chain 3/8", rope 5/8"?
What is the diameter of the rope of the product?
What is the size?
What is the slackWhat is the type of product?
Does it have a free fall function?
What is the chain diameter of this product?
Is this product vertical or horizontal?
Who is the Maxwell? For three decades, the name Maxwell has been synonymous with the standards ofhighest performance anchoring solutions for superyachts, pleasure boats and commercial vessels. Our international reputation for excellence has evolved through continued R&D, innovative design, customer service and a commitment to style and quality unparalleled in the industry. How to describe the Maxwell HRC10 Horizontal Rope Chain Windlass - 12V Capstan Chain 3/8", 5/8" Rope? HRC10 Horizontal Rope Chain Windlass - 12V Winch 3/8" Chain 5/8" Rope Maxwell The HRC10 represents another step forward in performance and excellence in anchor handling. This...

HRC10 Horizontal Rope Chain Windlass - 12V Capstan, 3/8" Chain, 5/8" Rope
The Maxwell HRC10 represents yet another breakthrough in anchor handling performance and excellence. Fully automatic horizontal rope/chain windlasses have been designed to offthe ultimate in safety and efficiency for any application where a self-contained windlass is required.
The HRC10 features a patented horizontal chain drive system that provides unrivaled reduction in windlass friction and wear, while maintaining the same level of structural integrity as the traditional horizontal rope chain windlass HRC10 - 12V Capstan, 3/8", 5/8" chain The HRC10 from Rope
Maxwell represents a new advancement in performance and excellence in anchor handling. Fully automatic horizontal cable/chain windlasses have been designed to provide the ultimate in ease of use and reliability for all types of boats.
It features a drive motor Highly efficient gearless that starts quickly and runs smoothly. with minimal maintenance requirements. The HRC10 is also equipped with a powerful

HRC cast motor10 Rope Horizontal Chain Windlass - 12V Capstan, 3/8" Chain, 5/8" Rope
Maxwell's HRC10 represents yet another step forward in performance and excellence in anchor handling. Fully automatic horizontal rope/chain windlasses have been designed for use with small to medium sized anchors and offer an extremely high degree of reliability and strength.
Designed to be mounted on the mast 'a boat, this windlass is The unit is ideal for anchoring in shallow water or shallower areas where

What is the rope diameter of the product? 5/8"

HRC10 Horizontal Chain Windlass - 12V Capstan, 3/8" Chain, 5/8" Rope
Maxwell's HRC10 represents yet another step forward in performance and excellence in anchor handling The horizontal and fully automatic rope/chain windlasses have been designed to o.providing the ultimate in safety and efficiency for any application where a self-contained windlass is required.
The HRC10 features a patented horizontal chain drive system that provides unrivaled friction reduction and wear, while maintaining the same level of structural integrity as the HRC10 Horizontal Chain Windlass - 12V Capstan, 3/8" Chain, 5/8" Rope
Maxwell's HRC10 represents yet another advancement in performance and excellence in anchor handling. Fully automatic horizontal cable/chain windlasses have been designed to provide the ultimate in ease of use and reliability for all types of boats.
It features a drive motor Highly efficient gearless that starts quickly and runs smoothly. with minimal maintenance requirements. The HRC10 is also equipped with a powerful cast iron horizontal chain windlass
HRC10 - 12V capstan, 3/8" chain, 5/8" rope
Maxwell's HRC10 represents yet another advancement in the performance and excellence of anchor handling. The horizontal, fully automatic rope/chain windlasses have been designed for use with small to medium sized anchors and offer an extremely high degree of reliability and strength.
Designed to be mounted on the mast of a boat, this unit is ideal for anchoring in shallow water or shallower areas. where the

What is the size? 14.6''L x 12.1''W x 7.9''H; Weight: 25 lbsWhat is the mounting type of the product? Horizontal, above deck, with capstanDoes it have a free fall function? YesWhat is the chain diameter of this product? 3/8"Is this product vertical or horizontal? Horizontal

Save $791 on the purchase of the Maxwell HRC10 Horizontal Rope Chain Windlass - Capstan 12V, 3/8" Chain, 5/8" Ropefor only $3,167 from NVN Marine! Fast, free same-day delivery before 3 p.m. Maxwell HRC10 Horizontal Rope Chain Windlass - 12V Capstan 3/8" Chain, 5/ 8" Rope Technical Specifications

Type:	Anchoring and mooring \| Windlasses
Supplier:	Maxwell
Weight:	55.0 lbs
Chain - Diameter (inches):	3/8"
Free fall:	Yes
Rope Diameter (Inches):	5/8"
Vertical/Horizontal:	Horizontal
Product brochure:	Download PDF