Megaware SkegGuard 27081 Stainless Steel Replacement Skeg Boat Outfitting

Megaware SkegGuardMegaware SkegGuard offers the best of both worlds. It will protect and prevent damage to your engine fin and can also be used to repair and replace an already broken fin. The Megaware SkegGuard is constructed of high quality marine grade 316 stainless steel. Additionally, it features a reinforced wear tab on the bottom, where the fin is most vulnerable. The thick 3mm bottom plate will resist damage from rocks, debris and sliding on the ramp. The Skeg Guard conforms to your lower unit, ensuring no perceptible drag or compromise in performance. Additionally, a drainage hole prevents water from accumulating and stagnating. Secured with self-locking hardware, installation takes less than 10 minutes. If you are replacing an already broken fin, the Skeg Guard can be installed with as little as 2 inches of fin remaining. The Megaware SkegGuard can make youe save hundreds of dollars in potential repairs. This will be stronger and much more affordable than welding and replacing a lower fin. Megaware SkegGuard is available in models to fit virtually any fin. Engine models include Evinrude, Johnson, Honda, Mercury, Mariner, Nissan, OMC, Tohatsu, Suzuki, Volvo and Yamaha. Megaware guarantees your Megaware SkegGuard for a period of three years from the date of purchase. Please retain receipt as proof of date of purchase.

Megawear Keelguard 27081 Attributes Megawear Keelguard 27081 Features and Benefits

Mirror polished finish
Thickened bottom wear tab Protects against ramp slippage and is ideal for river operation.
Drainage hole prevents corrosion and freezing
Does not compromise the performance
Do-it-yourself Skeg protection installation in less than 10 minutes
Installs with as little as 2 to 3 inches of fin remaining

SkegGuard 27081 Stainless Steel Replacement Fin

Model Guide

Evinrude - 90-115-130 25" or 30" 2-stroke shaft 2006- present 105-150 1994-2001
Johnson- 90-115-130 Shaft 25" or 30" 2006-present 105-150 1994-2001 125 1994-1998 135 Shaft 20 " 2000-2006 150 Shaft 20" 2002-2006 175-200 1994-2001 225-250-300 1994-2001 175-200-20" Shaft 2 stroke 2006-present
Suzuki - 300 4 stroke 2009-present
OMC Cobra - V6 and V8 1986-1994

Inexpensive solution to a broken spoiler - Save hundreds of dollars on fender repairs and replacement.

Megaware SkegGuard offers the best of both worlds. It will protect and prevent damage to your engine fin and can also be. used to repair and replace an already broken fine.

Protect your fin with the best protector

The Megaware SkegGuard is constructed of high quality marine grade 316 stainless steel that incorporates a tab Extra reinforced wear pad on the bottom, where the wing is most vulnerable.

This 3mm thickened bottom plate withstand damage or abrasion caused by hidden rocks and debris or accidental sliding of the ramp. The Megaware SkegGuard conforms to your lower unit to ensure there is no perceptible drag or performance compromise. A drainage hole prevents water from pooling and remaining stagnant.

Secured with self-locking hardware, the Megaware SkegGuard can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.

When replacing an already broken fin, the Megaware SkegGuard can be installed on a lower unit with as little as 2 inches of fin remaining. It will be stronger and much more affordable than welding and replacing a lower fin.

Megaware SkegGuard is available in designs to fit virtually any fin.

Warranty

Megaware guarantees your Megaware SkegGuard for a period of three years from the date of purchase. Please retain receipt as proof of date of purchase.

Features:

Mirror polished marine grade 316 stainless steel
Thickened bottom wear tab protects against ramp slippage and is ideal for river running
Drain hole prevents corrosion and freezing
Will not compromise performance
Do-it-yourself installation in less than 10 minutes
Installation in just 2 minutes 3 inches of Skeg remaining

Megaware SkegGuard is made of high quality 316 marine grade stainless steel. At the bottom is the most sloped part, with an additional reinforcing wear plate at the bottom.
PRODUCT ID: 72243
SKU: NVN-72243
CSKU: CWR-72243
REWRITE: 83354-megaware -skegguard-27081-stainless-steel-replacement-skeg
MPN: 27081
UPC: 672057270813
ASIN: B005BI6852
WSKU:
SSKU: KEE-27081
KSKU: KEE27081
br>GSKU:
MSKU:
LSKU: 254-27081
NAME: Megaware SkegGuard 27081 Stainless Steel Replacement Skeg
NAME_EX: MEGAWARE SKEGGUARD 27081 EVINRUDE JOHNSON SUZUKI
PTITLE: Megaware SkegGuard 2Skeg Replacement Stainless Steel 7081
TYPE: Boat Equipment | Hull Protection
SELLER: Megaware
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Automotive Parts & Accessories
MEGAWARE KEELGUARD SkegGuard 27081 EVINRUDE 90- 115-130 Shaft 25â‚¬-30â‚¬ 2006-present / 150-175-200-20â‚¬ Shaft E-TEC 2006-present - No Lightning gear cases. See 27281 for G2.
Megaware Skegguard 27081 Stainless Steel Replacement Skeg by Hodges Marine
Automotive Parts & Accessories
Gtags:

Evinrude Johnson

GSpecs:

Megaware SkegGuard 27081 Stainless Steel Replacement Skeg Product Description

Megaware SkegGuardMegaware SkegGuard offers the best of both worlds. It will protect and prevent damage to your engine fin and can also be used to repair and replace an already broken fin. The Megaware SkegGuard is constructed of high quality marine grade 316 stainless steel. Additionally, it features a reinforced wear tab on the bottom, where the fin is most vulnerable. The thick 3mm bottom plate will resist damage from rocks, debris and sliding on the ramp. The Skeg Guard conforms to your lower unit, ensuring no perceptible drag or compromise in performance. Additionally, a drainage hole prevents water from accumulating and stagnating. Secured with self-locking hardware, installation takes less than 10 minutes. If you are replacing an already broken fin, the Skeg Guard can be iinstalled with as little as 2 inches of fin remaining. The Megaware SkegGuard can save you hundreds of dollars in potential repairs. This will be stronger and much more affordable than welding and replacing a lower fin. Megaware SkegGuard is available in models to fit virtually any fin. Engine models include Evinrude, Johnson, Honda, Mercury, Mariner, Nissan, OMC, Tohatsu, Suzuki, Volvo and Yamaha. Megaware guarantees your Megaware SkegGuard for a period of three years from the date of purchase. Please retain receipt as proof of date of purchase.

Megawear Keelguard 27081 Attributes Megawear Keelguard 27081 Features and Benefits

Mirror polished finish
Thickened bottom wear tab protects against ramp slippage and is ideal for river operation
Drain hole prevents corrosion and freezing
Don'tmwill not promise performance
Do-it-yourself Skeg Guard in less than 10 minutes
Installs with as little as 2 to 3 inches of Skeg remaining

SkegGuard 27081 Stainless Steel Replacement Skeg

Model Guide

Evinrude - 90-115-130 Shaft 25" or 30" 2-stroke 2006-present 105-150 1994-2001
Johnson- 90- 115-130 25" or 30" shaft 2-stroke 2006-present 105-150 1994-2001 125 1994-1998 135 20" shaft 2000-2006 150 20" shaft 2002-2006 175-200 1994-2001 225 -250-300 1994 -2001 175-200-20" Shaft 2 stroke 2006-present
Suzuki - 300 4 stroke 2009- Present
OMC Cobra - V6 and V8 1986-1994

Inexpensive solution to a broken spoiler - Save hundreds of dollars on repairs and replacement

Megaware SkegGuard offers the best of both worlds. It will protect and prevent damage to your engine's fin.r and can also be used to repair and replace an already broken fin.

Protect your fin with the best protector

The Megaware SkegGuard is built in high quality marine grade 316 stainless steel that incorporates a full length extra reinforced wear tab. at the bottom where the fender is most vulnerable.

This 3mm thickened bottom plate will resist damage or abrasion caused by hidden rocks and debris or accidental sliding of the ramp. The Megaware SkegGuard conforms to your lower unit to ensure there is no perceptible drag or performance compromise. A drainage hole prevents water from pooling and remaining stagnant.

Secured with self-locking hardware, the Megaware SkegGuard can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars en potential repairs.

When replacing an already broken fin, the Megaware SkegGuard can be installed on a lower unit with as little as 2 inches of fin remaining. It will be stronger and much more affordable than welding and replacing a lower fin.

Megaware SkegGuard is available in designs to fit virtually any fin.

Warranty

Megaware guarantees your Megaware SkegGuard for a period of three years from the date of purchase. Please retain receipt as proof of date of purchase.

Features:

Mirror polished marine grade 316 stainless steel
Thickened bottom wear tab protects against ramp slippage and is ideal for river operation.
Drain hole prevents corrosion and freezing
Does not compromise performance
Do it yourself Installs in less timeof 10 minutes
Installs with as little as 2 to 3 inches of Skeg remaining

Megaware SkegGuard is made from marine grade materials of high quality. 316 stainless steel. At the bottom is the most finned part, with an additional reinforcing wear plate at the bottom.

Frequently Asked Questions (FAQ) About Megaware SkegGuard 27081 Stainless Steel Replacement Stem Who is Megaware?
How to Describe Megaware SkegGuard 27081 Stainless Steel Replacement Stem ?
What is it? the weight of the product?
What is the color of the Megaware stainless steel replacement SkegGuard 27081 for example?
Who is the Megaware? Megaware developed the industry's first do-it-yourself keel protector in 1992 and has been providing boat owners with the highest quality protection, including hull protection, aileron protection and others. Thanks to hisCommitted to excellence in product development, quality standards, technology and customer support, Megaware KeelGuard has grown rapidly and is recognized as a global supplier of the smallest fishing boats to the largest Coast Guard fleets.How to describe Megaware SkegGuard 27081 Stainless Steel Replacement Skeg? Megaware SkegGuard is made from high quality marine grade 316 stainless steel. At the bottom is the most inclined part, with an additional reinforcing wear plate at the bottom. What is the weight of the product? 2What color is the Megaware SkegGuard 27081 Stainless Steel Replacement Stem? Stainless Steel

Save $19 when you purchase the Megaware SkegGuard 27081 Stainless Steel Replacement Fins for only 95 $from NVN Marine! Same day dispatch before 3 p.m. M Stainless Steel Replacement Fin Videosegaware SkegGuard 27081 Technical Specifications for Megaware SkegGuard 27081 Stainless Steel Replacement Fin

Type:	Boat Equipment \| Shell protection
Supplier:	Megaware
Weight:	1.4 lbs
Color:	Stainless steel
Product brochure:	Download PDF
Product Installation:	Download PDF

Megaware SkegGuard 27081 Stainless Steel Replacement Skeg Reviews Megaware SkegGuard 27081 Stainless Steel Replacement Skeg Shipping & Returns

Shipping Weight:	1.4 lbs
Box sizes:	1.00 (h) x 9.00 (w) x 19.00 (w)
Cubic feet:	171.0
Returnable:	Yes