Minn Kota Riptide SF 80 Saltwater Bow Mount Trolling Motor - 24V-80 lb-62" Boat Outfitting
Riptide SF
Saltwater Bow Support
Arm yourself with the ultimate weapon against saltwater. The brand new Riptide? SF features fewer moving parts, tighter tolerances, advanced corrosion protection and our revolutionary new single-arm. You get no-nonsense power, stealthy operation, and rugged, reliable performance - everything you need to put salt water where it belongs.
Single-arm design
Sometimes the simplest solution is the best. In this case, it's a revolution. Riptide SF's innovative single-arm design features an extruded and anodized aluminum structural beam that operates without metal-to-metal contact and with 75% less twisting. A single hinge point and rear pivot bearing with 20% more surface area provide less wear, longer life and quieter operation than mote mountsTraditional engines.
Counter Voltage Stabilizer (CTS)
CTS uses an integrated spring that applies force whether the motor is stowed or deployed. On the water, this translates to a play-free motor, no kinks, reduced steering torque and quiet operation.
Lift assist
The design of the assist Lifting Riptide SF cuts storage and deployment weight in half, making it as easy as lifting the tailgate of your SUV. It features a nitrogen-charged stainless steel gas spring to allow you to enter and exit the water with ease.
Removable 360° bow guard
Lifting the motor and bow guard from the mount is now even easier on Riptide SF - just remove a single cap screw. The Bowguard 360'™ also features a dual bearing system that eliminates noise and allows for better escapes from any angle.
AdjustQuick-Lock Cam Depth Adjuster
Change depths simply and safely with the Quick-Lock cam adjuster. It simplifies depth adjustment and locks securely to hold your motor where you want it.
Tilt/Extended Tiller
Get the best of both worlds on your motor manual control. with the new Tilt/Extend Tiller. It can both tilt (up to 45°) and extend (6") to fit the way you live.h.
Push-on battery gauge for tester - Riptide SF
Get an instant "state of charge" with this easy-to-read gauge.
Digital Maximizer
Digital Maximizer™ monitors and optimizes power to extend battery life and reduce harmful heat You'll stay on the water up to five times longer on a single charge.
Weedless Wedge 2 Accessory</. b>
Keep weeds awayand tackle the thick stuff without draining the battery. chop and hack. Weedless Wedge™ 2 features swept-back blades for relentless, reliable propeller performance.
Advanced corrosion protection
Riptide motors are impervious to corrosive effects salt water, thanks to marine grade alloys and aluminum upper arms. The metals undergo a rigid, multi-step cleaning process before being anodized or coated with special zinc dichromate shielding. All components are then finished with a durable 5 mil TGIC polyester powder paint. When it's all done, you're left with unmatched corrosion protection.
Fully Encapsulated Electronics
Marine grade urethane fully encapsulates Riptide control boards to protect electronic circuitry . Additionally, all electrical connections are sealed with li-proof heat shrink tubing.quides to form an impregnable barrier against salt water.
Sacrificial anode
Galvanic corrosion occurs when two dissimilar metals come into electrical contact. through salt water. Riptide counters with a sacrificial zinc anode, composite shaft, and properly balanced materials that are close in electrical potential. The result is a motor fully protected against the destructive forces of salt water.
Two-year warranty
This motor is backed by Minn Kota's two-year warranty
Specifications
- Control: Tiller tilt/extension
- Volts: 24r
- Maximum thrust: 80 lbs.r
- Shaft length: 62"r
- Speed control: Variable
- Maximum amp consumption: 56r
- Accessory:Weedless Wedge 2 (MKP-33)
This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), which is known to the State of California to cause cancer, birth defects or other reproductive problems For more information, go to P65Warnings.ca.gov.
The extruded aluminum arm of the Riptide Fortrex makes your bow stand out. eye-catching. It has 80 pounds of thrust and a single-arm design to help you accomplish any task. It is made of extruded anodized aluminum and has a solid one-piece structure that helps your traction motor run more quietly, s. wear less and last longer. The spring built into this bracket applies force whether the traction motor is retracted or extended. This means that the traction motor has no gaps for many years, no gaps, no gaps. reduced steering torque and a fosilent operation. The open arrow blade can be powered by a single object without the need to spend a lot of work on felling and battery felling, so Weedless Wedge 2 is one of the most reliable accessories in the field of fishing. Press the button on the drag motor head to get the real-time status of the remaining power. So when the salt water battle heats up, make sure the strongest person in the room is on your side.
PRODUCT ID: 35157
SKU: NVN-35157
CSKU: CWR-35157
REWRITE: 46268-minn-kota-riptide-sf-80-saltwater-bow-mount
MPN: 1363641
UPC: 029402032075
ASIN: B001M5TTCW
WSKU: MIN1363641
SSKU:
KSKU:
GSKU:
MSKU:
LSKU: 27-1363641
NAME: Minn Kota Riptide SF 80 Saltwater Bow Mount Trolling Motor - 24V-80lb-62"
EX_NAME: MINN KOTA RIPTIDE RT SF 80/B BG/HAND 24V 80LB 62"
PTITRE: Minn Kota Riptide SF 80 Saltwater Bow Mount Trolling Motor - 24V-80 lb-62"
TYPE: Boat Equipment| Trolling Motors
SELLER: Minn Kota
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> WATERCRAFT ENGINES & ENGINES
Minn Kota Riptide Fortrex Saltwater L-Mounted Trolling Motor 'bow with hand override (24V, 80 lbs)
Minn Kota Riptide SF 80 Bow Mounted Saltwater Trolling Motor - 24V-80 lbs-62" [1363641]
Gtags:
| Minn Kota | |
| Boat |
GSpecs:
Minn Kota Riptide SF 80 Saltwater Bow Mount Trolling Motor - 24V - 80 lbs - 62" Product Description
Riptide SF
Water Bow Mount saltwater
Arm yourself with the ultimate weapon against saltwater The all-new Riptide™ SF features fewer moving parts, tighter tolerances, advanced corrosion protection and our new single arm. You get no-frills power, stealth operation and rugged, reliable performance - everything you need to put salt water where it belongs.
Sometimes the simplest solution is the best. In this case, it's a revolution Riptide SF's innovative single-arm design features an extruded, anodized aluminum structural beam. no metal-to-metal contact and 75% less twisting Single hinge point and rear pivot bearing with 20% more surface area.They offer less wear, longer life and quieter operation than traditional engine mounts. .
Counter Voltage Stabilizer (CTS)
CTS uses a built-in spring that applies force whether the motor is stowed or deployed. On the water, this translates to a play-free, play-free motor with reduced steering torque and quiet operation.
Lift-Assist
The Lift design Riptide SF's -Assist cuts the stowage and deployment weight in half, making it as simple as lifting the tailgate of your SUV. It features a nitrogen-charged stainless steel gas spring to allow you to enter and exit the water with ease.
Removable 360° bow guard
Lifting the motor and bow guard from the mount is now even easier on Riptide SF - just remove a single cap screw. The Bowguard 360'™ also features a dual wheel systemment that eliminates noise and allows for better escapes from any angle.
Quick-lock cam depth adjuster
Change depths simply and safely with the Quick-Lock cam adjuster. It simplifies depth adjustment and locks securely to hold your motor where you want it.
Tilt/Extended Tiller
Get the best of both worlds on your motor manual control. wWith the new Tilt/Extend Tiller. It can both tilt (up to 45°) and extend (6") to suit the way you fish.
Push-to-Test Battery Gauge - Riptide SF
Get an instant "state of charge" with this easy-to-read gauge.
Digital Maximizer
Digital Maximizer™ monitors and optimizes the power to extend battery life and reduce harmful heat You'll stay on the water up to five times longer with it.a single charge.
Weedless Wedge 2 Accessory
Keep out weeds and tackle thick stuff without draining the battery. chop and hack. Weedless Wedge™ 2 features swept-back flared blades for relentless, reliable propeller performance.
Advanced Corrosion Protection
Riptide motors are impervious to corrosive effects salt water, thanks to premium marine alloys and aluminum upper arms, the metals are put through a rigid multi-stage cleaning process before being anodized or coated with special zinc dichromate shielding. All components are then finished with a durable coating.5 mil TGIC polyester, powder coat paint. When it's all finished, you're left with unmatched corrosion protection.
Fully Encapsulated Electronics
Marine grade urethane fully encapsulates Riptide control boards to protectmanage electronic circuits. Additionally, all electrical connections are sealed with liquid-tight heat shrink tubing to form an impregnable barrier against salt water.
Sacrificial anode
Galvanic corrosion occurs when two different metals come into electrical contact. through salt water. Riptide counters with a sacrificial zinc anode, composite shaft, and properly balanced materials that are close in electrical potential. The result is a motor fully protected against the destructive forces of salt water.
Two-year warranty
This motor is backed by Minn Kota's two-year warranty
Specifications
- Control:Tiller tilt/extension
- Volts: 24
- Maximum thrust: 80 lbs.
- Shaft Length: 62"
- Speed control: Variable
- Maximum amp consumption: 56
- Accessory: Weedless Wedge 2 (MKP-33)
This product can expose you to chemicals, including di(2-ethylhexyl phthalate (dehp), known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,
Aluminium. The Riptide Fortrex extrusion arm makes your bow particularly eye-catching. It has 80 pounds of thrust and a single arm design to help you accomplish any task. made from extruded anodized aluminum and has a solid one-piece construction that helps you The traction motor runs quieter, wears less and lasts longer. The spring built into this bracket applies force whether the traction motor is retracted or extended. This means that the traction motor has no space for many years, no space, no space.reduced steering torque. and quiet operation. The arrow open blade can be used.It is powered by any object without the need to spend a lot of felling and felling work on battery, that's why Weedless Wedge 2 is one of the most popular accessories more reliable in the field of fishing. Press the button on the drag motor head to get the real-time status of the remaining power. So when the salt water battle heats up, make sure the strongest person in the room is on your side.
Minn Kota Riptide SF 80 Saltwater Bow Mount Trolling Motor - 24V-80 lb-62" Related ProductsT-H Marine G-Force ELIMINATOR Trolling Motor Blue Prop Nut f/Minn Kota 80-101-112 Trolling Motor
Frequently Asked Questions (FAQ) for Minn Kota Riptide SF 80 Bow Mount Trolling Motor salt water - 24 V-80 lb-62" Whichis the Minn Kota?
How to describe the Minn Kota Riptide SF 80 Bow Mount Saltwater Trolling Motor - 24V-80 lb-62"?
Is this product suitable for fresh or salt water?
What is the input voltage range?
What is the series of the product?
What propeller included with the product?
What is the shaft length (inches) of the product? How to mount or what is the mounting style of the Minn Kota Riptide SF 80 Bow Mount Saltwater Trolling Motor - 24V- 80lb -62"?
What is the thrust (pounds) of the product?
What is the control type of the product?
Does this product have a built-in transducer?
Does this product have an autopilot function?
Who is Minn Kota? Minn Kota is the world's oldest electric fishing motor manufacturer with nearly 70 years of hard-earned experience in the lab and on the water. Their list of Minn Kota soutient this commitment to the development of trolling motors and the fishing community. Today, Minn Kota is the undisputed leader in the trolling motor industry. enjoying a dominant market share in bow and transom mount engines. How to describe the Minn Kota Riptide SF 80 Saltwater Bow Mount Trolling Motor - 24V-80 lb-62"? Aluminum extrusionRiptide Fortrex Ionic Arm makes your bow particularly eye-catching. It has 80 pounds of thrust and a single-arm design to help you accomplish any task It's made from extruded anodized aluminum and has a solid one-piece structure that helps your traction motor run quieter, wear less and. to last longer. The spring built into this bracket applies force whether the traction motor is retracted or extended. This means that the traction motor has no effect.space for many years, no gap, reduced steering torque and quiet operation. The swept open blade can be powered by any object without the need to spend a lot of work on battery harvesting and felling, so that Weedless Wedge 2 is one of the most popular fishing accessories more reliable. Press the button on the drag motor head to get the real-time status of the remaining power. So when the battle against salt water heats up, make sure the strongest person in the room is on your side.
- The RPTIDE SF is the ultimate weapon against salt water .
- Fewer moving parts for less maintenance, tighter tolerances for better performance, and advanced corrosion protection that keeps your equipment in tip-top shape.
- The mono -Revolutionary arm makes it easy to place your equipment in any location. positivedesired without having to worry about tangles or knots.
- The ultimate weapon against salt water corrosion.
- Fewer parts mobile for less maintenance.
- Advanced protection against corrosion.
- Revolutionary new single-arm for unrivaled stability and precision.
With the Minn Kota Riptide SF 80, you'll never have to worry about getting stuck in a difficult situation. This is a heavy-duty trolling motor with a lift assist system that will make deployment and storage easier. This trolling motor is perfect for fishing, hunting and kayaking.
Is this product suitable for fresh or salt water? Salt- The RPTIDE SF is the ultimate weapon against salt water.
- Fewer moving parts for less maintenance, tighter tolerances for better performance and advanced protection against the corrosion that keeps your equationequipment in perfect condition.
- The revolutionary Mono-Arm makes it easy to place your equipment in any position without having to worry about tangles or knots.
- The ultimate weapon against salt water corrosion.
- Fewer moving parts for less maintenance.
- Advanced corrosion protection.
- New single-arm revolutionary for unrivaled stability and precision.
- Gas spring makes storage and deployment easy. When you deploy, let go of Fortrex and Lift-Assist will gradually bring it back to the surface.
- The stainless steel shaft is corrosion resistant and keeps your engine running at peak performance for years to come. come.
- Minn Kota's patented SmartSteer technology keeps your boat on course with a little help from you.
- The motor automatically deploys when raised to the surface, leaving you with a worryi less.
- The stainless steel gas spring ensures the motor is always ready for action.
- A perfect choice for anglers looking for a motor which is easy to use and durable at the same time.
Buy the best price Minn Kota Riptide SF 80 Saltwater Trolling Motor - 24V-80 lb-62" for only 1,599 $fromNVN Marine! Fast, Free Same Day Delivery before 3 p.m.Riptide SF 80 Saltwater Trolling Motor - 24V-80 lb-62" Minn Kota Videos Riptide SF 80 Saltwater Trolling Motor - 24V- 80 lb-62" Technical specifications
| Type: | Boat outfitter | Trolling Motors |
|---|---|
| Supplier: | Minn Kota |
| Weight: | 68.0 lbs |
| Propeller included: | MKP-33 |
| Autopilot: | No |
| Control Type: | Tilt/Extend Tiller |
| Mounting Style: | Arc |
| Salt water/fresh water: | Salt |
| Shaft Length (inches): | 62" |
| Thrust ( pounds): | 80 lbs |
| Integrated transducer: | No |
| Tension - Input Range (Volts): | 24 V |
| Series: | Riptide |
| Product Manual: | Download PDF |
| Shipping Weight: | 68.0 lbs |
|---|---|
| Box sizes: | 7.00 (h) x 19.00 (w) x 75.00 (w) |
| Cubic feet: | 9975.0 |
| Returnable: | Yes |
| P65: | Yes |
For more shipping policy details, please see our shipping policy and you can find our return and refund policy here.
- Minn Kota Riptide SF 112/HC/BG Saltwater Trolling Motor – 36V 112 lbs 62 in
- Minn Kota Riptide SE 70 - Latch and Door - Manual Override - 24V-70lb-52"
- Minn Kota Riptide RT80/T Saltwater Transom Mount - 24V-80 lb-42"
- Minn Kota Riptide PowerDrive 70/CP BT Trolling Motor with CoPilot - 24V-70 lb-54" *Refurbished
- Minn Kota Riptide PowerDrive 70 Trolling Motor with Micro Remote - 24V - 70 LB - 54"
- Minn Kota Riptide PowerDrive 70 Trolling Motor with i-Pilot and Bluetooth - No Pedal Included - 24V-70 lbs-54" *Refurbished
- Minn Kota Riptide PowerDrive 55 Trolling Motor with Micro Remote - 12V - 55 LB - 54"
