MotorGuide anti-rebound kit Boat Outfitting

Featuring an impact-resistant plastic tube with a rubber foot, there is a model available to fit any Gator mount. It attaches using existing bracket hardware. The tube is cut to the required length for proper spacing between the bracket and the foredeck of the boat. The Bounce Buster pivots from the mount head into the stowed position to prevent downward momentum caused by the impact of rough water, keeping the mount and motor solid on the boat.

Attributes of the Bounce Buster MotorGuide MGA097B6

Used for: Trolling Motor Models X5 and Older
Type: Bolt-On
Color: Black

MotorGuide MGA097B6 Features and Benefits

Protects your Trolling Motor from damage when stored
Featuring an impact-resistant plastic tube with a rubber foot rubber
For use with X5 and older models
Made in the USA
No Supplier Warranty

Bounce Buster Kit

For use with X5 mounts and older

The MotorGuide Bounce Buster is designed to prevent damage to the trolling motor mount, motor and boat when operating in rough water. Featuring an impact-resistant plastic tube with a rubber foot, there is a model available to fit any Gator mount. It attaches using existing bracket hardware. The tube is cut to the required length for proper spacing between the bracket and the foredeck of the boat. The Bounce Buster pivots from the bracket head to the stowed position to prevent downward momentum caused by the impact of rough water, keeping the bracket and motor solid on the boat. In the fishing position, the Bounce Buster folds neatly.

Perfect for bass boat applications where the front deck of the boatis within 12 inches of the media head. Check out the Bounce Buster II fitted to the 2007 Triton Bassmaster classic bass boats.

Equipped with an impact-resistant plastic tube with rubber feet, this model can be used with no any Gator mount. It uses existing installed hardware to connect. Cut the tube into...
PRODUCT ID: 56548
SKU: NVN-56548
CSKU: CWR-56548
REWRITE: 67659-motorguide-bounce-buster-kit
MPN: MGA097B6
UPC: 089287028938
ASIN: B0000C6HIV
WSKU:
SSKU:
KSKU: MGDMGA097B6
GSKU:
MSKU: MOTMGA097B6
LSKU: 702-MGA097B6
NAME: MotorGuide Bounce Buster Kit
NAME_EX: MOTORGUIDE BOUNCE BUSTER KIT
PTITLE: MotorGuide Bounce Buster Kit
TYPE: Boat Equipment | Trolling Motor Accessories
SELLER: MotorGuide
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> ENGINES AND POWERWATER ENGINES
Sports
Motorguide Bounce Buster II Kit (fits a Gator Spring Mnt)
MotorGuide Bounce Buster Kit
Sports
Gtags:

Motor Guide

GSpecs:

MotorGuide Bounce Buster Kit Product Description

Featuring an impact-resistant plastic tube with a rubber foot, there is a model available to fit any Gator mount. It attaches using existing bracket hardware. The tube is cut to the required length for proper spacing between the bracket and the foredeck of the boat. The Bounce Buster pivots from the rack head into the stowed position to prevent downward momentum caused by the impact of rough water, keeping the rack and motor solid on the boat.

MotorGuide MGA097B6 Attributes MotorGuide MGA097B6 Attributes

Used for: X5 Trolling Motor Models and older
Type: Bolt-on
Color: Black

MotorGuide MGA097B6 Features and Benefits

Protects your trolling Motor cprotects against damage when stored
Features an impact-resistant plastic tube with a rubber foot
For use with X5 and older models
Made in the USA
No supplier warranty

Bounce Buster Kit

To use with X5 and older mounts

The MotorGuide Bounce Buster is designed to prevent damage to the trolling motor mount, motor and boat when operating in rough water. Featuring an impact-resistant plastic tube with a rubber foot, there is a model available to fit any Gator mount. It attaches using existing bracket hardware. The tube is cut to the required length for proper spacing between the bracket and the foredeck of the boat. The Bounce Buster pivots from the bracket head to the stowed position to prevent downward momentum caused by the impact of rough water, keeping the mount and engine strong on the boat. In the fishing position, the Bounce Buster folds neatly.

Perfect for bass boat applications where the front deck of the boat is within 12 inches of the rack head. Check out the Bounce Buster II fitted to 2007 Triton Bassmaster Classic Bass Boats.

Equipped with a high impact plastic tube with rubber feet, this model can be used with any what Gator support. It uses existing installed hardware to connect. Cut the tube into...

Frequently Asked Questions (FAQ) about the MotorGuide Bounce Buster Kit Who is the MotorGuide?
How do I describe the MotorGuide Bounce Buster Kit?
What is the MotorGuide Bounce Buster Kit? the type of product?
What is the weight of the product?
What is the color of the MotorGuide Bounce Buster kit?
Who is the MotorGuide? Even though trolling motor technology had been around for almost 30 years, no one had relied on thes basic concepts. Anglers everywhere were frustrated and looking for ways to make their trolling motor work for them. Better, faster, stronger... and MotorGuide was born. MotorGuide partners with Attwood Marine, also a subsidiary of Brunswick and Mercury Marine. How do I describe the MotorGuide Bounce Buster kit? Equipped with an impact-resistant plastic tube with rubber feet, this model can be used with any Gator stand. It uses existing installed hardware to connect. Cut the tube into...What is the type of product? Bolt-On

$12

MotorGuide Bounce Buster Kit

$37

Type:	Boat Equipment \| Trolling Motor Accessories
Seller:	MotorGuide
Weight:	0.6 lbs

Shipping Weight:	0.6 lbs
Box sizes:	2.00(h) x 8.00(w) x 10.00(l)
Cubic feet:	160.0
Returnable:	Yes
USPS First Class:	Yes
P65:	Yes