Navico StructureScan 3D Stainless Steel Thru-Through Probe - Single Marine Navigation & Instruments

StructureScan 3D gives freshwater and saltwater anglers a unique three-dimensional view of fish, structure and bottom contours, making it easier to understand fish location and structure in relation to to your boat. With StructureScan 3D, anglers spend less time searching for productive water and more time catching fish. StructureScan 3D is powered by multi-beam sonar technology that not only produces three-dimensional views of underwater structure and bottom contours, but also enhances the performance of two-dimensional Downscan and StructureScan HD imaging.

Lowrance Electronics 0013559001 Attributes

Mounting Location: Hull Mount
Depth: 600 feet side sweep/ 300 feet down sweep
Rated Power: 500 watts
Frequency Range: 455 kHz
Angle supported: 16 to 24 degrees Deadrise
LonCable Length: 30 Feet

Lowrance Electronics 0013559001 Features and Benefits

Scans up to 600 feet on either side of your boat
Get a true three-dimensional view fish, structure and bottom contour, making it easier to know where fish and structure are in relation to your boat
Stainless steel transducer supports remote mounting through the hull
Flat mounting or with the fairing block provided
One year limited warranty

StructureScan 3D Stainless Steel Through-Hull Transducer - Simple

Lowrance and Simrad Yachting announce the launch of a new StuctureScan 3D Stainless Steel Through-Hull Transducer for the D's product line StructureScan 3D sonar imaging, offering greater range and greater resolution.

Like the transom-mounted StructureScan 3D transducers, the veStainless steel through-hole rion provides extreme target detail, bottom discrimination as well as bait and game separation at depth. up to 300'(92M) and a wider range of 600'(183M) of left and right coverage.
These stainless steel StructureScan 3D transducers from Airmar are available only from Navico exclusively for StructureScan 3D systems. These rugged, stainless steel StructureScan 3D transducers resist the electrical forces of the environment in which they will be used.
Each features a low-profile design that minimizes drag; provide a proprietary 3-channel beam, port and starboard SideScan as well as DownScan Imaging™ and 3D Imaging technology; an optional high-performance shroud is available (000-13581-001) to give you better StructureScan performance at high speeds; and feature a 30' (9M) transducer cable.

Forboats with steep or varying hull angles, consumers should purchase the StructureScan 3D Stainless Steel Thru-Hull Pair (000-13560-001). StructureScan 3D stainless steel through-type transducer to Navico's StructureScan 3D module to get the best 3D underwater images on the left and right sides of your monitor.
PRODUCT ID: 63402
SKU: NVN-63402
br>CSKU: CWR-63402
REWRITE: 74513-navico-strucTurescan-3D stainless steel thru-hull transducer
MPN: 000-13559-001
UPC: 9420024157701
ASIN: B01M5JHP93
WSKU: LOW00013559001
SSKU: LOW-000- 13559-001
KSKU: LOW0013559001
GSKU:
MSKU:
LSKU:
NAME: Navico Stainless Steel Through-Hull Transducer StructureScan 3D - Simple
NAME_EX: NAVICO STRUCTURESCAN 3D STAINLESS STEEL THROUGH-HULL transducer
PTITLE: Navico StructureScan 3D stainless steel through-hull transducer - Simple
TYPE: Navigation and maritime instruments | Transducers
SELLER: Navico
ELECTRONICS> MARINE ELECTRONICS> FISH FOUNDERS

Lowrance Xdcr, StructureScan 3D SS Thru-Hull
Navico StructureScan 3D Stainless Steel Through-Through Transducer - Single

Gtags:

Lowrance

GSpecs:

Navico StructureScan 3D Stainless Steel Through-Hull Transducer - Unique Product Description

StructureScan 3D provides freshwater and saltwater anglers with a unique three-dimensional view of fish, structure and bottom contours, which makes it easier to understand fish location and structure. in relation to your boat. With StructureScan 3D, anglers spend less time searching for productive water and more time catching fish. StructureScan 3D is powered by multi-beam sonar technology that not only produces three-dimensional views of underwater structure and bottom contours, but also enhances the performance of two-dimensional Downscan and StructureScan HD imaging.

Lowrance Electronics 0013559001 Attributes

Mounting Location: Shell Mount
Depth: 600 ft side scan/Down scan300 feet
Rated power: 500 watts
Frequency range: 455 kHz
Supported angle: 16 to 24 degrees Deadrise
Cable Length: 30 feet

Lowrance Electronics 0013559001 Features and Benefits

Scans up to 600 feet on either side of your boat
Get a true three-dimensional view of the fish, structure and bottom contour, making it easier to know where the fish and structure are in relation to your boat.
Stainless steel transducer supports thru-hull mounting
Flat mount or with supplied fairing block
One year limited warranty

Thru-Hull Stainless Steel StructureScan 3D Transducer - Simple

Lowrance and Simrad Yachting announce the launch of'a new stainless steel StuctureScan 3D pass-through transducer for the StructureScan 3D sonar imaging product line, providing greater range and resolution.

As with StructureScan transducers 3D transom-mounted thru-hull stainless steel version provides extreme target detail, bottom discrimination, and bait and game separation at depths up to 300 ft (92 M) and a wider range of 600 ft (183M) of left and right coverage.
These stainless steel StructureScan 3D transducers from Airmar are available only from Navico exclusively for StructureScan 3D systems . These rugged, stainless steel StructureScan 3D transducers resist the electrical forces of the environment in which they will be used.
Each features a low-profile design that minimizes drag; provide an exclusive bundle3-channel, port and starboard SideScan as well as DownScan Imaging™ and 3D Imaging technology; an optional high-performance shroud is available (000-13581-001) to give you better StructureScan performance at high speeds; and feature a 30' (9M) transducer cable.
For boats with steep or varying hull angles, consumers should purchase the StructureScan 3D Stainless Steel Thru-Hull Pair (000-13560-001).

Pair the stainless steel StructureScan 3D through-type transducer with Navico's StructureScan 3D module to obtain the best 3D underwater images on the left and right sides of your monitor.

Navico StructureScan 3D stainless steel through-hull transducer - Single Related products10' extension cable for Navico dual transducer - 12 pin - f/StructureScan 3D
Sudbury elastomeric marine sealant - 10 oz Cartridge - White
Sudbury Elastomeric Marine Sealant - 10 oz Cartridge - Black
Sudbury Elastomeric Marine Sealant - 10 oz Cartridge - Clear
3 oz (89 ml) Sudbury Elastomeric Sealant Tube - White
Sudbury Elastomeric Sealant 3 oz (89 ml) Sealant Tube - Clear
Sudbury Elastomeric Sealant Tube 3 oz (89 ml) - Black
BoatLIFE Life-Calk Sealant Tube - Non-Shrink - 2, 8 FL. Oz - White
BoatLIFE Life-Calk Putty Tube - Non-Shrink - 2.8 FL. Oz - Black
BoatLIFE Life-Calk Putty Tube - Non-Shrink - 2.8 FL. Oz - Mahogany

Frequently Asked Questions (FAQ) About the Navico StructureScan 3D Stainless Steel Thru-Hull Transducer - Simple Who is the Navico?
How to describe the transducer Navico StructureScan 3D stainless steel thru-hull transducer - single?
What is the power rating of the product?
How to mount or what is the mounting style of the Na stainless steel thru-hull transducervico StructureScan 3D - Simple?
What is the cable length (feet)?
What is the cable length?
Who is Navico? Navico is the leader in marine electronics and is currently the largest marine electronics company in the world. Navico is the parent company of leading marine electronics brands: Lowrance, Simrad, B&G and C-MAP. Navico has approximately 1,500 employees worldwide and is distributed in more than 100 countries. Navico partners with a global network of talented suppliers to provide quality products to its customers. How to Describe the Navico StructureScan 3D Stainless Steel Thru-Hull Transducer - If there is a problem? Pair the StructureScan 3D stainless steel through-type transducer with the Navico StructureScan 3D module to get the best 3D underwater images on the left and right sides of your monitor.

The StructureScan 3D The transducerstainless steel through-hull transducer is a new through-hull transducer designed for the StructureScan 3D sonar imaging product line.
This through-hull transducer features a stainless steel dome and 'one piece elongated stainless steel. shaft.
It also has the ability to withstand harsh environments thanks to its polyurethane coating and waterproofing system.

The new shell stainless steel thru-hull StuctureScan 3D transducer is the first through-hull transducer that provides high-performance, high-resolution sonar imaging at depths up to 1,000 feet.
This industry-leading sonar transducer he industry is the result of the combined expertise of Lowrance and Simrad Yachting in the marine domain. underwater electronics and acoustics.

Navico StructureScan is the world's most advanced, accurate and affordable 3D scanning sonar. With its patented StructureScan 3D& 174; technology, StructureScan 3D transducers provide high-resolution images of underwater structures

What is the power rating of the product? 500 watts

The StructureScan 3D stainless steel through-hull transducer is a new through-hull transducer designed for the StructureScan 3D sonar imaging product line.
This transducer passes -shell features a stainless steel dome and an extended one-piece stainless steel shaft.
It also has the ability to withstand harsh environments thanks to its polyurethane coating and system watertightness.
The new StuctureScan 3D Stainless steel through-hull transducer is the first through-hull transducer that provides high-performance, high-resolution sonar imaging at depths up to 1,000 feet.
This industry-leading sonar transducer is the resultfrom the collaboration of Lowrance and Simrad Yachting. combined expertise in marine electronics and underwater acoustics.
Lowrance StructureScan 3D stainless steel thru-hull transducer Single model: 000-13559-001 UPC: 9420024157701
The new version stainless steel thru-hull provides extreme target detail with a single transducer.
With a depth range of 200 feet, StructureScan 3D is the most powerful and versatile sonar in the industry.
The best 3D imaging technology on the market.
Complete coverage of the bottom of your boat.
Stainless steel construction for durability.

How to mount or what is the mounting style of the Navico StructureScan 3D Stainless Steel Thru-Hull Transducer - Simple? Hull LoopWhat is the length of the cable (in feet)? 30'What is the length of the cable? 30 feet

Save $399 on achat of the Navico StructureScan 3D Stainless Steel Thru-Through Probe - Simple for only $1,149 b> from NVN Marine! Free same day delivery before 3 p.m. Navico StructureScan 3D Stainless Steel Through-Hull Transducer - Unique Technical Specifications

Type:	Navigation & Marine Instruments \| Transducers
Supplier:	Navico
Weight:	7.6 lbs
Mounting Style:	through the hull
Cable length (feet):	30'
Shipping Weight:	7.6 lbs
Box Sizes:	5.00 (h) x 12.00 (w) x 16.00(l)
Cubic feet:	960.0
Returnable:	Yes

For more shipping policy details, please view our shipping policy and you can find our return and refund policy here.