NavPod GP-1050-26 Pre-Cut SailPod f/Simrad GO12 XSE/B&G Vulcan 12R f/9.5″ Wide Guard Boat Outfitting

GP-1050-26 SailPre-cut pod for Simrad GO12 XSE/B & G Vulcan 12R for 9.5″ wide protection

SailPods are intended for mounting a single radar or chartplotter at the helm. Navigation at your fingertips… "Where and when you need it. » SailPods are the smart solution for mounting your radar or chart plotter at the helm, where you can easily operate it and clearly see every minute detail on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above on the straight section.

Features:

Structural rigidity – Gen3 improvements now include ABS material coated with thicker acrylic that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof Seal – All SailPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements includea thicker silicone outer seal with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The gasket will continue to do its job.
Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-proof nickel-chrome-plated stainless steel screws provide security combined with a little style!
Commitment to quality – We stand behind our commitment by offering a 10-year warranty on all new NavPod Gen3s.

GP-1050-26 fits Simrad GO12 radar or chartplotter on the helmet Navigate your...
PRODUCT ID: 80569
SKU: NVN-80569
CSKU: CWR-80569
REWRITE: 91680-navpod-gp- 1050-26-. sailpod-pre-cut-f-simrad-go12-xse-b-g
MPN: GP1050-26
UPC: 659988116618
ASIN: B07R8V6B32
WSKU: NAVGP105026
SSKU :
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod GP-1050-26 Pre-Cut SailPod f/Simrad GO12 XSE/B&G Vulcan 12R f/9.5″ Wide Guard
br>NAME_EX: NAVPOD PRE-CUT SAILPOD FOR SIMRAD GO12 Boat | Display Mounts
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

NavPod GP-1050-26 SailPod Pre-Cut f/Simrad GO12> Boat
GSpecs:

NavPod GP-1050-26 Pre-Cut SailPod for Simrad GO12 GO12 fingers… "Where and when you need it." SailPods are the smart solution for mounting your radar or chart plotter at the helm, where you can easily operate it and clearly see every detail on the screen. have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Chrome-plated, tamper-proof screws provide a little bling and a lot of security. Designed with a double-sealed waterproof seal, NavPods protect your devices. electronics for the most difficult and wet offshore sailing conditions A SailPod is better mo.nted on a Single Bend AngleGuard, or on the inclined section of a Double Bend Angle Guard with an InstrumentPod mounted above on the straight section.

Features:

Structural Rigidity – Gen3 improvements now include thicker gauge acrylic coated ABS material. which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof Seal – All SailPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SailPods are stupiddesigned to withstand the most difficult and wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell gAsket polyurethane is now 50% thicker and is not subject to "retentive compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The gasket will continue to do its job.
Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-proof nickel-chrome-plated stainless steel screws provide security combined with a little style!
Commitment toquality - We stand behind our commitment by offering a 10-year warranty on all new NavPod Gen3s.

GP-1050-26 fits Simrad GO12 XSE/B and SailPod precuts G Vulcan 12R, and fits 9.5" wide shield SailPods for mounting a single radar or chartplotter on the helmet. Navigate your...

Frequently asked questions (FAQ) about the NavPod GP-1050-26 SailPod Pre-Cut f/Simrad GO12 XSE/B&G Vulcan 12R f/9.5″ Wide Guard Who what is the NavPod?
How to describe the NavPod GP-1050-26 SailPod Pre-Cut f/Simrad GO12 XSE/B&G Vulcan 12R f/9.5″ Wide Guard?
Is it cut or uncut?
How to mount or what is the mounting style of the NavPod GP-1050-26 SailPod Pre-Cut f/Simrad GO12 way to mount your fishfinder, radar or GPS The unique waterproof seal, the manufacturing quality and the design.Attractive design makes the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod GP-1050-26 SailPod Pre-Cut f/Simrad GO12 XSE/B&G Vulcan 12R f/9.5″ wide guard? The GP-1050-26 fits the SailPod pre-cuts on the Simrad GO12 Navigate your... Is it cut or uncut?

Save $106 when you buy the NavPod GP-1050-26 SailPod Pre- Cut f/Simrad GO12 Cut f/Simrad GO12 XSE/B&G Vulcan 12R f/9.5″ WideGuard Technical. Specifications

Type:	Boat equipment \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cutted
Edit Style:	Pedestal

NavPod GP-1050-26 Pre-Cut SailPod for Simrad GO12 XSE/B&G Vulcan 12R f/9.5″ Wide Guard User ReviewsNavPod GP-1050 -26 Pre-Cut SailPod for Simrad GO12 refund here.