NavPod GP1040-09 Pre-cut SystemPod for Garmin echoMAP 92sv / 93sv / 94sv / 95sv and 1 instrument Boat Outfitting

GP1040-09 Pre-cut SystemPod for Garmin echoMAP™ 92sv / 93sv / 94sv / 95sv and 1 instrument

Instrument cutout: 3.6" hole

The NavPod GP1040 series for the 9.5" SystemPods Guard allows multiple electronics to be mounted in a single NavPod. This is a good way to reduce the height of a system. In addition to installing a radar or chartplotter, you may have space for an autopilot, instrument, stereo controller, or VHF mic. It is best to mount a SystemPod on single-bend AngleGuards.

High gloss material

NavPods are made with custom co-extruded ABS to acrylic cap. material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides bettere structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent waterproof seal between the front and back of the NavPod for protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod key for greater capacitymaintained during tightening than the previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming has been considered an art since every process came into play. It all starts with tooling design and development. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Commitment to quality
NavPod is committed to producing the best possible waterproof enclosure for marine electronics. With now two decades of experience under our belt, we are confident that you will benefit from years oftrouble-free service and a shiny, durable finish. We will honor our commitment by now offering a 10-year warranty on all new NavPod Gen3s.

SystemPods are used to install multiple electronic devices into one NavPod. This is a good way to reduce the height of the system. In addition to installing a radar or chartplotter,...
PRODUCT ID: 59260
SKU: NVN-59260
CSKU: CWR-59260
REWRITE: 70371-navpod-gp1040- 09-systempod-pre-cut-f-garmin-echomap-92sv
MPN: GP1040-09
UPC: 659988109979
ASIN: B00YAZFAQA
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod GP1040-09 SystemPod Pre-Cut f/Garmin echoMAP™ 92sv / 93sv / 94sv / 95sv & 1 Instrument
NAME_EX: NAVPOD GP1040 -09 SYSTEMPOD PRE-CUT FOR GARMIN ECHOMAP
PTITLE: NavPod GP1040-09 SystemPod Pre-Cut f/Garmin echoMAP™ 92sv / 93sv / 94sv / 95sv & 1 Instrument
TYPE: Boat fitting | Poster supportsge
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod GP1040-09 SystemPod Pre-Cut for Garmin echoMAP 92sv/93sv / 94sv/95sv and 1 instrument for 9.5" wide

Gtags:

GSpecs:

NavPod GP1040-09 Pre-cut SystemPod for Garmin echoMAP™ 92sv / 93sv / 94sv / 95sv and 1 instrument Product description GP1040-09 Pre-cut SystemPod for Garmin echoMAP™ 92sv / 93sv / 94sv / 95sv and 1 instrument

Instrument cutout:3.6 inch hole

NavPod GP1040 Series for 9.5 inch SystemPods Guard SystemPod allows multiple electronic parts to be mounted in one only NavPod. This is a good way to reduce the height of a system. In addition to installing a radar or chartplotter, you may have space for an autopilot, instrument, stereo controller, or VHF mic. It is best to mount a SystemPod on single-bend AngleGuards.

High gloss material

NavPods are made with custom co-extruded ABS to acrylic cap. material. We use the best UV resistant material that provides a high gloss white finish that matchesgel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel mounting hardware.e supplied with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3, we provide tamper-proof nickel-chrome-plated stainless steel screws for added security, combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with tooling design and development. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Commitment to quality
NavPod is committed to producing the best possible waterproof case pfor marine electronics. With now two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a long-lasting, glossy finish. We will honor our commitment by now offering a 10-year warranty on all new NavPod Gen3s.

SystemPods are used to install multiple electronic devices into one NavPod. This is a good way to reduce the height of the system. In addition to installing radar or chartplotter,...

Frequently asked questions (FAQ) about the NavPod GP1040-09 SystemPod Pre-Cut f/Garmin echoMAP™ 92sv / 93sv / 94sv / 95sv & 1 Instrument Who is the NavPod?
How to describe the NavPod GP1040-09 SystemPod Pre-Cut f/Garmin echoMAP™ 92sv / 93sv / 94sv / 95sv & 1 Instrument ?
Is it cut or Uncut?
How to mount or what is the mounting style of NavPod GP1040-09 SystemPod Pre-Cut f/Garmin echoMAP™ 92sv / 93sv / 94sv/ 95sv and 1 instrument?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod GP1040-09 SystemPod Pre-Cut f/Garmin echoMAP™ 92sv / 93sv / 94sv / 95sv and 1 instrument? SystemPods are used to install multiple electronic devices into a NavPod. This is a good way to reduce the height of the system. In addition to installing a radar or chartplotter,...Is it cut or not? Cut

$102

NavPod GP1040-09 Pre-Cut SystemPod for Garmin echoMAP™ 92sv / 93sv / 94sv / 95sv and 1 instrument

$357

Type:	Boat Outfitter \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cutted
Edit Style:	Pedestal

For detailed shipping policy, please consultlter our shipping policy and you can find our return and refund policy here.