NavPod GP1040-22 SystemPod pre-cut f/Raymarine ES97/ES98 and space on the left f/9.5 Wide Guard Boat Outfitting

GP1040-22 SystemPod pre-cut for Raymarine ES97/ES98 and space on the left for protection 9.5 inches wide

The NavPod GP1040 series for SystemPods protection of 9, 5" allows multiple electronic parts to be mounted in a NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller or VHF mic.

High gloss material
NavPods are made with custom co-extruded ABS material with acrylic cap We use the best UV resistant material that provides very high strength. Gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The waterproof seal
All The Na.vPod are manufactured with a double seal system providing an excellent seal between the front and back of the NavPo.d for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws
We use all steel mounting hardware stainless steel supplied with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3, we provide invi screwsolables in nickel-chrome-plated stainless steel for added safety combined with a little bling!

The manufacturing process
Large gauge thermoforming is considered an art since Many processes come into play. It all starts with tooling design and development. We are fortunate to have experienced in-house design engineers using CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality
We are committed to producing the best possible waterproof enclosure for marine electronics. With now two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a long-lasting, glossy finish. We will respect our commitment by now offeringThere is a 10-year warranty on all new NavPod Gen3s.

SystemPods are used to install multiple electronic devices into one NavPod. This is a good way to reduce the height of the system. In addition to installing a radar or chartplotter,...
PRODUCT ID: 59366
SKU: NVN-59366
CSKU: CWR-59366
REWRITE: 70477-navpod-gp1040- 22-systempod-pre -cut-f-raymarine-es97-es98
MPN: GP1040-22
UPC: 659988110685
ASIN: B07RB17X2X
WSKU: NAVGP104022
SSKU:
KSKU :
GSKU:
MSKU:
LSKU:
NAME: NavPod GP1040-22 SystemPod Pre-cut for Raymarine ES97/ES98 and space on the left f/9.5 Wide Guard
EX_NAME: NAVPOD TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod SystemPod GP1040-22 for 9.5" Wide Guard

Gtags:

GSpecs:

NavPod GP1040-22 SystemPod pre-cut for Raymarine ES97/ES98 and space on the left f/9.5 Wide Guard Product description GP1040-22 SystemPod pre-cut for Raymarine ES97/ES98 and space on the left for 9.5 Wide Guard

The NavPod GP1040 series for the 9.5" SystemPod Guard allows multiple electronics to be mounted in a single NavPod. This is a good way to reduce the height of a system. In addition When mounting a radar or chart plotter, you may have room for an autopilot, instrument, stereo controller, or VHF mic. It is best to mount a SystemPod on a single-curvature AngleGuards.

High Gloss Material
NavPods are made with custom co-extruded ABS material We use the best UV resistant material that provides a high gloss white finish that matches the. Gel-coated fiberglass Gen3 improvements now include thicker material.s which improves strength and resistance. provides better structural rigidity.

The waterproof seal
All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws
We use all steel mounting hardware stainless steel supplied with each NavPod. Large round head tamper-proof screws have deeper sockets forthe NavPod wrench for better holding capacity when tightening than previous screws. For Gen3 we provide tamper proof nickel chrome plated stainless steel screws for added security combined with a little bling!

The manufacturing process
Heavy gauge thermoforming is considered like an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality
We are committed to producing the best possible waterproof enclosure for marine electronics. With now two decades of experience under our belt, we are confident that you will benefitEnjoy years of trouble-free service and a durable, glossy finish. We will honor our commitment by now offering a 10-year warranty on all new NavPod Gen3s.

SystemPods are used to install multiple electronic devices into one NavPod. This is a good way to reduce the height of the system. In addition to installing a radar or chart plotter,...

Frequently Asked Questions (FAQ) AbNavPod GP1040-22 Pre-Cut SystemPod f/Raymarine ES97 /ES98 and space on the left f/9.5 Wide Guard Who is the NavPod?
How to describe the NavPod GP1040-22 SystemPod pre-cut f/Raymarine ES97/ ES98 and space on the left f/9.5 Wide Guard ?
Is it cut or uncut?
How to mount or what is the mounting style of NavPod GP1040-22 SystemPod Pre-Cut f/Raymarine ES97/ES98 & Space on the left f/9.5 Wide Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. Unique waterproof seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod GP1040-22 SystemPod pre-cut for Raymarine ES97/ES98 and space on the left for /9.5 Wide guard? SystemPods are used to install multiple electronic devices into oneNavPod. This is a good way to reduce the height of the system. In addition to installing a radar or chartplotter,...Is it cut or not? Cut

$108

NavPod GP1040-22 SystemPod pre-cut for Raymarine ES97/ES98 and space on the left f/9.5 Wide Guard

$351

Type:	Boat fittings \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cutted
Edit Style:	Pedestal

For detailed shipping policy, please see our shipping policy and you can find our return policytour and refund here.