Sale!
NavPod GP1040-23 Pre-Cut SystemPod for Garmin 7408/7408XSV/7608/7608XSV and Space on the Left f/9.5 Wide Guard
NavPod GP1040-23 Pre-Cut SystemPod for Garmin 7408/7408XSV/7608/7608XSV and Space on the Left f/9.5 Wide Guard

NavPod GP1040-23 Pre-Cut SystemPod for Garmin 7408/7408XSV/7608/7608XSV and Space on the Left f/9.5 Wide Guard

$80

SKU: NavPod GP1040-23 Pre-Cut SystemPod for Garmin 7408/7408XSV/7608/7608XSV and Space on the Left f/9.5 Wide Guard
Category:

NavPod GP1040-23 Pre-Cut SystemPod for Garmin 7408/7408XSV/7608/7608XSV and Space on the Left f/9.5 Wide Guard Boat Outfitting

GP1040-23 Pre-cut SystemPod for Garmin 7408/7408XSV/7608/7608XSV and space on the left for 9.5" wide protection

The NavPod GP1040 series for body guard system 9.5" allows you to mount many of the electronic parts in a NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you may have room for an autopilot, instrument, stereo controller, or VHF mic. mounted on uniquely curvature AngleGuards.

High gloss material
  • NavPods are made with custom co-extruded ABS material with acrylic cap that we use. the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.
The seal wasnche
  • All NavPods are manufactured with a double seal system providing excellent sea sealing between the front and back of the NavPod for protection of your electronics navy. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws
  • We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than pre-mounted screwscedents. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process
  • Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality
  • We are committed to producing the best possible waterproof enclosure for marine electronics. With now two decades of experience under our belt, we are confident that you will benefit from years of trouble-free service andhas a shiny, durable finish. We will deliver on our commitment by now offering a 10-year warranty on all new Gen3 NavPods.


SystemPods are used to install multiple electronic devices into one NavPod. This is a good way to reduce the height of the system. In addition to installing a radar or chartplotter,...
PRODUCT ID: 59338
SKU: NVN-59338
CSKU: CWR-59338
REWRITE: 70449-navpod-gp1040- 23-systempod-pre-cut-f-garmin-7408
MPN: GP1040-23
UPC: 659988110692
ASIN: B07XVCVLXC
WSKU: NAVGP104023
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod GP1040-23 Pre-Cut SystemPod for Garmin 7408/7408XSV/7608/7608XSV and left space for 9.5 Wide Guard
NAME_EX: NAVPOD GP1040- 23 SYSTEMPOD PRE-CUT FOR GARMIN 7408
PTITLE: NavPod GP1040-23 SystemPod Pre-Cut f/Garmin 7408 / 7408XSV / 7608 / 7608XSV and space left f/9.5 Wide guard
TYPE: Bat layoutwater | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NAVPOD GP1040-23 systempod pre-cut f/Garmin 7408 /7408xsv /7608/7608xsv

Gtags:
Boat
Automotive

GSpecs:

NavPod GP1040-23 Pre-Cut SystemPod for Garmin 7408/7408XSV/7608/7608XSV and Space on Left f/9.5 Wide Guard Product DescriptionGP1040-23 Pre-Cut SystemPod for Garmin 7408/7408XSV/7608/7608XSV and Space on the left for 9.5" wide protection

NavPod The GP1040 series for 9.5" protection SystemPods allow you to mount multiple electronic components in a single NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you may have room for an autopilot, instrument, stereo controller, or VHF mic. It is best to mount a SystemPod on a single curvature AngleGuards.

The Hi-Gloss. Material
  • NavPods are made with custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches fiberglasse gel coated. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

    • The waterproof seal
    • All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your Marine. Electronic. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

    Chrome-plated nickel screws
    • We use all stainless steel mounting hardware supplied with eachthan NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with small shielding.g!

    The manufacturing process
    • Large gauge thermoforming is considered an art since many processes come into play. It all starts with tooling design and development. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

    Our commitment to quality
    • We are committed to producing the best waterproof case possible formarine electronics. With now two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a long-lasting, glossy finish. We will deliver on our commitment by now offering a 10-year warranty on all new Gen3 NavPods.


    SystemPods are used to install multiple electronic devices into one NavPod. This is a good way to reduce the height of the system. In addition to installing radar or chartplotter,...

    Frequently asked questions (FAQ) about the NavPod GP1040-23 SystemPod Pre-Cut f/Garmin 7408 / 7408XSV / 7608 / 7608XSV & Space On The Left f/9.5 Wide Guard Who is the NavPod?
    How to describe the NavPod GP1040-23 SystemPod Pre-Cut f/Garmin 7408 / 7408XSV / 7608 / 7608XSV & Space On The Left f/9.5 Wide Guard?
    Is it cut or uncut?
    How to mount or what is the mounting style of the NavPod GP1040-23 SystePre-cut mPod for Garmin 7408/7408XSV/7608/7608XSV and space on the left for /9.5 Wide Guard?
    Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all NavPods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access.write NavPod GP1040-23 Pre-Cut SystemPod f/Garmin 7408/7408XSV/ 7608/7608XSV and space on the left f/9.5 Wide Guard? SystemPods are used to install multiple electronic devices into a NavPod. This is a good way to reduce the height of the system. In addition to installing a radar or chartplotter,...Is it cut or not? Cut How to mount or what is the mounting style of theNavPod GP1040-23 SystemPod Pre-Cut f/Garmin 7408 / 7408XSV / 7608 / 7608XSV & Space On The Left f/9.5 Wide Guard? Pedestal

    Save $108when you purchase the NavPod GP1040-23 Pre-Cut SystemPod for Garmin 7408/7408XSV/7608/7608XSV and Left Space for 9.5 Wide Guard for only $351from NVN Marine! Same day dispatch before 3 p.m. NavPod GP1040-23 Pre-Cut SystemPod for Garmin 7408/7408XSV/7608/7608XSV and Space on the Left f/9.5 Wide Guard Technical Specifications
    Type:

    Boat outfitter | Display Stands
    Seller:

    NavPod
    Cut/Uncut:

    Cut
    Edit Style:

    Pedestal
    NavPod GP1040-23 SystemPod pre-cut for Garmin 7408/7408XSV/7608/7608XSV and space on the left f/9.5 Wide Guard User reviewsNavPod GP1040-23 SystemPod Pre-Coupe f/Garmin 7408 / 7408XSV / 7608 / 7608XSV and space on the left f/9.5 Wide Guard Shipping & Return
Related products