Navpod GP1080-22 SystemPod for Simrad G09 and GO9-XSE Marine Navigation & Instruments

Navpod GP108022 SystemPod

Model: GP1080-22

Pre-cut SystemPod for Simrad GO9 & GO9 XSE / B&G Vulcan 9 & Vulcan 9R and 2 inst . (Simrad IS42 / B&G Triton2/AP44 square holes) for 9.5" wide protection

SystemPods allow radar or chart plotter and instruments to be mounted together on the bar Navigation at your fingertips. "Where you need it, when you need it". SystemPods are the smart solution for mounting your radar or chart plotter and instruments together on the helm where you can easily use them and. clearly see the smallest details of the screen.

This SystemPod for Power can be mounted on the dashboard using the SK135 bracket kit, or mounted high using the kit SK130 support bracket.

Structural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material that improves strength and provides abetter structural rigidity. This thicker material allows for greater sealing. The better the structural rigidity, the less flexing and more uniform pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal — All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important whene you will need to open the SystemPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large Round Head The tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-proof, nickel-chrome-plated stainless steel screws for added security and a bit of style!

Commitment to Quality We stand behind our commitment by offering a 10-year warranty on all the new NavPods Gen3.

Specifications

Clock
Height	11.625
Width	19.625
Depth	6.875
Usable face
Height	9.125
Width	17
Depth	5.75
Maximum cutout
Height	9.5
Width	17.5
Dimensions	19 x 14 x 8 in	td>

Navpod GP1080-22 SystemPod for Simrad G09 and GO9-XSE Product Description

Navpod GP108022 SystemPod

Model: GP1080-22

Pre-cut SystemPod for Simrad GO9 & GO9 XSE / B&G Vulcan 9 & Vulcan 9R and 2 inst. (Simrad IS42 / B&G Triton2/AP44 square holes) for 9.5" wide protection

This SystemPod for Power can be mounted on the dashboard using the SK135 bracket kit, or mounted high using the kit SK130 support bracket.

Structural Rigidity – Gen3 enhancements now include reco ABS materialMade from thicker gauge acrylic that improves strength and provides better structural rigidity. This thicker material allows for a larger seal. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal — All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and does notnot subject to "compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-proof, nickel-chrome-plated stainless steel screws for added security and a bit of style!

Commitment to Quality We stand behind our commitment by offering a 10-year warranty on all the new NavPods Gen3.

Specifications

Clock
Height	11,625
Width	19,625
Depth	6.875
Usable face
Height	9.125
Width	17
Depth	5.75
Maximum cutout
Height	9.5
Width	17.5
Dimensions	19 x 14 x 8 in

Save $330 when you purchase the Navpod GP1080-22 SystemPod for Simrad G09 and GO9-XSEfor only $199 from NVN Marine! Same day shipping before 3pm Navpod GP1080-22 SystemPod for Simrad G09 and GO9-XSE Technical specifications

Type:	Navigation and marine instruments \| Instruments
Supplier:	NavPod

Navpod GP1080-22 SystemPod for Simrad G09 and GO9-XSE User reviewsNavpod GP1080-22 SystemPod for Simrad G09 and GO9-XSE Shipping & Returns

For detailed shipping policy, please see our Shipping Policy and you can find our Returns & Refunds Policy here.