NavPod GP1500-32 Pre-Cut SystemPod f/Simrad NSS7 evo3/B&G Zeus3 7 & Space f/9.5″ Wide Guard Boat Outfitting

GP1500-32 Pre-cut SystemPod for Simrad NSS7 evo3/B & G Zeus3 7 and space for 9.5″ wide protection

SystemPods are intended for mounting a radar or chart plotter and Instruments assembled at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.

It is best to mount a SystemPod on a single-curvature AngleGuard.

Features:

Structural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material that improves strength and offers better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less ithere is flexion during tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic C-cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The seal will continue toe its job.
Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional S-series NavPod. For NavPods Gen3, we provide tamper-resistant nickel-chrome-plated stainless steel screws for added security combined with a bit of style!
Commitment to quality - We stand by our commitment by offering a 10-year warranty on all new NavPods Gen3.

Wide GuardSystemPods can install radar or chartplotter and instruments on the helm. Navigate at your fingertips, anytime, anywhere. ...
PRODUCT ID: 80580
SKU: NVN-80580
CSKU: CWR-80580
REWRITE: 91691-navpod-gp1500-32-systempod-pre-cut-f-simrad-nss7 -evo3-b-g
MPN: GP1500-32
UPC: 659988113839
ASIN: B07RB18P2J
WSKU: NAVGP150032
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod GP1500-32 SystemPod pre-cut f/Simrad NSS7 evo3/B&G Zeus3 7 & Space f/9.5″ Wide Guard
NAME_EX: NAVPOD GP1500-32 SYSTEMPOD PRE-CUT SIMRAD NSS7 EVO3 B&G ZEUS3 7
PTITLE: NavPod GP1500-32 Pre-cut SystemPod f/Simrad NSS7 evo3/B&G Zeus3 7 & Space f/9.5″ Wide Guard
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

NavPod GP1500-32 SystemPod Pre-Cut f/Simrad NSS7 evo3/BG Zeus3 7 Space f/9.5 Wide Guard

Gtags:

GSpecs:

NavPod GP1500-32 Pre-Cut SystemPod for Simrad NSS7 evo3/B&G Zeus3 7 and Space f/9.5″ Wide Guard Product Description

GP1500-32 Pre-Cut SystemPod for Simrad NSS7 evo3/B & G Zeus3 7 & Space for 9.5″ wide protection

SystemPods allow radar or chart plotter and instruments to be mounted together at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.

It is best to mount a SystemPod on a single-curvature AngleGuard.

Features:

Structural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material that improves strength and offers better rigiditystructural. This thicker material allows for greater sealing. The better the structural rigidity, the less flexing when tightening a joint and more uniform pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is importantnt when you need to open the SystemPod in the future to repair your electronic devices. The gasket will continue to do its job.
Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large Round Head Tamper Roof Screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our Traditional Series NavPod. For NavPods Gen3, we provide tamper-resistant nickel-chrome-plated stainless steel screws for added security combined with a bit of style!
Commitment to quality - We stand by our commitment by offering a 10-year warranty on all new NavPods Gen3.

Wide GuardSystemPods can install radar or chartplotter and instruments on the helm. Navigate at your fingertips, anytime, anywhere. ...

FoirAsk questions (FAQ) about the NavPod GP1500-32 SystemPod pre-cut for Simrad NSS7 evo3/B&G Zeus3 7 and Space f/9.5 ″ Wide Guard Who is the NavPod?
How to describe the NavPod GP1500-32 SystemPod Pre- Cut f/Simrad NSS7 evo3/B&G Zeus3 7 & Space f/9.5″ Wide Guard?
Is it cut or uncut?
How to mount or what is the mounting style of NavPod GP1500-32 SystemPod Pre-Cutf/Simrad NSS7 evo3/B&G Zeus3 7 & Space f/9.5″ Wide Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod GP1500-32 SystemPod Pre-Cut f/Simrad NSS7 evo3/B&G Zeus3 7 & Space f /9.5″ Wide guard? Wide GuardSystemPods can install radar or chart plotter and instruments on the helm. Navigate at your fingertips, anytime, anywhere. ...Is it cut or not? Cut

$89

NavPod GP1500-32 SystemPod Pre-Cut f/Simrad NSS7 evo3/B&G Zeus3 7 & Space f/9.5″ Wide Guard

$290

Type:	Layout boat \| Display Media
Supplier:	NavPod
Weight:	4.35 lbs
My Styletage:	Pedestal
Cut/Uncut:	Cut

Shipping Weight:	4.35 lbs
Box Sizes:	6.00 (h) x 8.00 (w) x 17.00 (w)
Cubic feet:	816.0
Returnable:	Yes