NavPod GP1504 SystemPod pre-cut f/Raymarine es75/es77/es78 and space on the left f/9.5" Wide Guard Boat Outfitting

GP1504 SystemPod Pre-cut for Raymarine es75/es77/es78 Space on left for 9.5" wide protection

Pre-cut on right side for chartplotter and space not cut out on left.

GP1500 Series for 9.5 inch guard, Sail SystemPods allow multiple electronics to be mounted in a single NavPod This is a good way to reduce the height of a system. In addition to mounting a radar or chart plotter, you may have room for an autopilot, instrument, stereo controller or VHF mic.
It is best to mount a SystemPod on a curvature AngleGuard. unique.

High Gloss Material

NavPods are made with custom co-extruded ABS material with acrylic cap. We use the best material. UV resistant that provides a high gloss white finish that matches gel coated fiberglass. Gen3 enhancements include.t now a thicker material that improves strength and provides better structural rigidity.

The waterproof seal

All NavPods are manufactured equipped with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large tamper-proof head screwsround have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Heavy-Gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now with two decWith hundreds of years of experience under our belt, we are confident you will benefit from years of trouble-free service and a long-lasting, glossy finish. We will deliver on our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

The GP1500 series is used in a 9.5-inch protective case, and The SystemPods used in Sail can install multiple electronic devices into one NavPod. This is a good way to reduce the height of the system.
PRODUCT RPID: 59271
SKU: NVN-59271
CSKU: CWR-59271
REWRITE: 70382-navpod-gp1504-systempod-pre-cut-f-raymarine-es75-es77-es78
br> MPN: GP1504
UPC: 659988110128
ASIN: B01DYWMQZW
WSKU: NAVGP1504
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod GP1504 SystemPod pre-cut f/Raymarine es75/es77/es78 and space on the left f/9.5" Wide Guard
NAME_EX: NAVPOD GP1504 SYSTEMPOD PRE-CUT FOR RAYMARINE ES75
PTITLE: NavPod GP1504 SystemPod pre-cut f/Raymarine es75/es77/es78 and space on the left f/9.5" Wide Guard
TYPE: Boat Equipment | Display Mounts
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod SystemPod GP1504 for 9.5" Wide Guard

Gtags:

GSpecs:

NavPod GP1504 SystemPod pre-cut for Raymarine es75/es77/es78 and space on the left f/9.5" wide Product Description GP1504 SystemPod pre-cut for Raymarine es75/es77/es78 space on the left for 9.5" wide Large Protection

Pre-cut on the right side for the chartplotter and uncut space on the left.

GP1500 Series for 9.5 inch protection, SystemPods for sailing allow you to mount several electronic elements in a single NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have space for an autopilot, instrument, stereo controller, or VHF mic. It is best to mount the SystemPod on a single curvature AngleGuard.

The glossy material

NavPods are made with co-extruded ABS material personalized acrylic hoodie. We use the best UV resistant material that offersa high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent watertight seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We useLet's read about all the stainless steel mounting hardware that comes with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel plated and chrome plated stainless steel pads. Heavy duty screws for added security combined with a bit of bling!

The manufacturing process

Large gauge thermoforming is considered an art since many of the processes come into play. It all starts with tooling design and development. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to qualityé

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will deliver on our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

The GP1500 series is used in a 9.5-inch protective case, and SystemPods used in sailing can install multiple electronic devices in one NavPod. This is a good way to reduce the height of the system.

Frequently asked questions (FAQ) about NavPod GP1504 SystemPod pre-cut for Raymarine es75/es77/es78 and space on the left f/9.5" Wide Guard Who is the NavPod?
How to describe the NavPod GP1504 SystemPod pre-cut f/Raymarine es75/es77/es78 and space on the left f/9.5" Wide Guard?
Is it cutor uncut?
How to mount or what is the mounting style of NavPod GP1504 SystemPod Pre-Cut f/Raymarine es75/es77/es78 & Space On The Left f/9.5" Wide Guard?
Who is The NavPod? Navpod is a better way to mount your fishfinder, radar or GPS The unique waterproof seal, build quality and attractive design make the best-built instrument case ever available to the marine industry. All NavPods include waterproof silicone seal and tamper-evident clips for added security and convenience, concealed wiring, and clean installation for easy access. Space On The Left f/9.5" Wide Guard? The GP1500 series is used in a 9.5-inch protective cover, and the SystemPod used in Sail can install multiple electronic devices in one NavPod. This is a good way to reduce the height of the system.Is it cut or uncut

89 $

NavPod GP1504 SystemPod pre-cut for Raymarine es75/es77/es78 and space on the left for 9.5" wide protection

$290

Type:	Boat Equipment\|Display Mounts
Supplier:	NavPod
Weight:	4.5 lbs
Cut/Uncut:	Coupe
Mounting style:	Pedestal

Shipping Weight:	4.5 lbs
Box Sizes:	6.00 (h) x 8.00 (w) x 16.00 (w) )
Cubic feet:	768.0
Returnable:	Yes

For detailed shipping terms, please see our Shipping policy and you canDiscover our return and refund policy here.