NavPod GP1600-10 Pre-cut SystemPod f/Simrad NSS7/B&G Zeus Touch 7 and 2 f/9.5" Wide Guard instruments Boat Outfitting

GP1600-10 Pre-cut SystemPod for Simrad NSS7/B&G Zeus Touch 7 and 2 instruments for 9.5" wide protection

Instrument cut-out size: 3.6" Hole

GP1600 series for 9.5" guard, SystemPods allow you to mount several electronic parts in a NavPod It is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you may have room for an autopilot, instrument, stereo controller or VHF mic.
It is best to mount a SystemPod on curvature AngleGuards. unique.

The glossy material

NavPods are made with custom co-extruded ABS material We use the best UV resistant material that provides a finish. high gloss white that matches gel coated fiberglass Gen3 improvements now include thicker gauge material which improves strength and provides m.better structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal. proof system providing an excellent waterproof seal between the front and back of the NavPod for protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod key for betterhad better holding capacity when tightening than the previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered unrt since many processes come into play. It all starts with tooling design and development. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident that you will benefitEnjoy years of trouble-free service and a durable, glossy finish. We will deliver on our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

SystemPods are used to install multiple electronic devices into one NavPod. This is a good way to reduce the height of the system. In addition to installing a radar or chartplotter,...
PRODUCT ID: 59302
SKU: NVN-59302
CSKU: CWR-59302
REWRITE: 70413-navpod-gp1600- 10-systempod-pre-cut-f-simrad-nss7-b-g-zeus
MPN: GP1600-10
UPC: 659988109856
ASIN: B00YAZJRZ0
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod GP1600-10 SystemPod Pre-Cut f/Simrad NSS7/ B&G Zeus Touch 7 & 2 Instruments f/9.5" Wide Guard
NAME_EX: NAVPOD GP1600-10 SYSTEMPOD PRE-CUT FOR SIMRAD NSS7 B&G
PTITLE: NavPod GP1600-10 SystemPod Pre-Cut f/Simrad NSS7/B&G Zeus Touch 7 & 2 Instruments f/9.5" Wide Guard
TYPE: Boat equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod GP1600-10 SystemPod Pre-Cut f/Simrad NSS7 /B&G Zeus Touch 7 & 2 Instruments f/9.5" Wide Guard

Gtags:

Boat

GSpecs:

NavPod GP1600-10 SystemPod pre-cut for Simrad NSS7/B&G Zeus Touch 7 and 2 instruments f/9.5" Wide Guard Product description GP1600-10 SystemPod pre-cut for Simrad NSS7/B&G Zeus Touch 7 and 2 instruments for Protection of 9.5" wide

Instrument cutout size: 3.6" hole

GP1600 series for protection of 9, 5", SystemPods are intended for mounting several electronic parts in a NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you may have room for an autopilot, instrument, stereo controller, or VHF mic.
It's best to mount a SystemPod on a single-curvature AngleGuards .

High Gloss Material

NavPods are made with a custom co-extruded ABS material with acrylic cap. We use the best UV resistant material which provides a high gloss white finishe which corresponds to gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all mounting hardware en stainless steel supplied with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for security.y combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the meThe best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will deliver on our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

SystemPods are used to install multiple electronic devices into one NavPod. This is a good way to reduce the height of the system. In addition to installing a radar or chartplotter,...

Frequently asked questions (FAQ) about the NavPod GP1600-10 SystemPod Pre-Cut f/Simrad NSS7/B&G Zeus Touch 7 & 2 Instruments f/9.5" Wide Guard Who is the NavPod?
How to describe the NavPod GP1600-10 SystemPod Pre-Cut f/Simrad NSS7/B&G Zeus Touch 7 & 2 Instruments f/9.5" Wide Guard?
Is it cut or uncut?
How to mount or what is the mounting style of NavPod GP1600-10 SystemPod Pre-Cut f/Simrad NSS7/B&G Zeus Touch 7 & 2 Instruments f/9.5" Wide Guard?
Who is NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, build quality and attractive design make the best-built instrument case ever available to the marine industry. All Navpods include a waterproof silicone seal, tamper-proof fasteners for added security and convenience. , concealed wiring and clean installation for easy access.How to describe the NavPod GP1600-10 SystemPod Pre-Cut f/Simrad NSS7/B&G Zeus Touch 7 & 2 Instruments f/9.5" Wide Guard? SystemPods are used to install multiple electronic devices into a NavPod. This is a good way to reduce the height of the system. In addition to installing a radar or chartplotter,...Is it cut or uncutHow to mount or what is the mounting style of the NavPod GP1600- 10 SystemPod prCutout f/Simrad NSS7/B&G Zeus Touch 7 & 2 Instruments f/9.5" Wide Guard? Pedestal

Save $104 when you purchase the NavPod GP1600-10 Pre-Cut SystemPod f/Simrad NSS7/B&G Zeus Touch 7 & 2 Instruments f/9.5" Wide Guardfor only $365 at NVN Marine! Same day dispatch before 3:00 p.m. NavPod GP1600-10 Pre-cut SystemPod for Simrad NSS7/B&G Zeus Touch 7 and 2 f/9.5" wide instruments. Guard Technical Specifications

Type :	Boat Equipment \| Display Mounts
Supplier:	NavPod
Cut/Uncut:	Cut
Mounting Style:	Pedestal

NavPod GP1600-10 Pre-Cut SystemPod for Simrad NSS7/B&G Zeus Touch 7 and 2 instruments f/9.5" Wide Guard User reviewsNavPod GP1600-10 SystemPod pre-cut for Simrad NSS7/B&G Zeus Touch 7 and 2 instruments f/9.5" Wide Guard Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our return & refund policy here.