NavPod GP2080-17 Pre-Cut SystemPod for Simrad NSS9 evo3/B&G Zeus3 9 and 2 Instruments (Simrad IS42/B&G Triton2/AP44 Square Hole) f/12" Wide Guard Boat Outfitting

GP2080-17 Pre-cut SystemPod for Simrad NSS9 evo3/B&G Zeus3 9 and 2 instruments (Simrad IS42/B&G Triton2/AP44 square hole) for 12" wide protection

SystemPods allow you to mount radar or chartplotter and instruments together at the helm. Navigation at your fingertips. SystemPods are the smart solution for. mount your radar or chart plotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.

It is best to mount a SystemPod on an AngleGuard to unique curvature.

Structural Rigidity – Gen3 improvements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the lessthe more flexing occurs when tightening, the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS.The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal – All SystemPods are made with a double seal system providing excellent sealing. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The joint will continue to doits job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. The large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our onelle series Traditi.NavPod. For NavPods Gen3, we provide tamper-resistant nickel-chrome-plated stainless steel screws for added security and a bit of style!

Commitment to quality
We stand behind our commitment by offering a 10-year warranty years on all new Gen3s. NavPods.

The pod is used to mount the radar or chartplotter and instrument to the helmet. Navigation at your fingertips. "Where it's needed…when it's needed." -Pods are smart...
PRODUCT ID: 73898
SKU: NVN-73898
CSKU: CWR-73898
REWRITE: 85009-navpod-gp2080-17-systempod-pre-cut- f-simrad-nss9-evo3-b-g
MPN: GP2080-17
UPC:
ASIN:
WSKU: NAVGP208017
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME : NavPod GP2080-17 Pre-cut SystemPod for Simrad NSS9 evo3/B&G Zeus3 9 and 2 instruments (Simrad IS42/B&G Triton2/AP44 Square Hole) f/12" Wide Guard
NAME_EX: NAVPOD SYSTEM POD PRE-CUT FOR SIMRAD NSS9 EVO3 B&G ZEUS3 9
PTITLE: NavPod GP2080-17 SystemPod Pre-Cut f/Simrad NSS9 evo3/B&G Zeus3 9 & 2 Ininstruments (Simrad IS42/B&G Triton2/AP44 Square Hole) f/12" Wide Guard
TYPE: Boat equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

NavPod GP2080-17 SystemPod Pre-Cut for Simrad NSS9 evo3 /B&G Instruments Zeus3 9 and 2 (Simrad IS42 square hole/B&G Triton2/AP44) for 12? Wide Guard

Gtags:

GSpecs:

NavPod GP2080-17 Pre-Cut SystemPod for Simrad NSS9 evo3/B&G Zeus3 9 and 2 instruments (Simrad IS42/B&G Triton2/AP44 square hole) f/12" Wide Guard Product Description

GP2080-17 SystemPod Pre-Cut -Cut out for Simrad NSS9 evo3/B&G Zeus3 9 & 2 instruments (Simrad IS42/B&G Triton2/AP44 square hole) for 12" wide protection

SystemPods are for mounting a radar or chartplotter and instruments together at the helm. Navigation at your fingertips. "Where you need it…when you need it." SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm where you can easily operate and clearly see the fine details of the screen.

It is best to mount a SystemPod on a single curvature AngleGuard.

Structural Rigidity – Gen3 enhancements now include higher gauge acrylic coated ABS materialpais which improves resistance and provides better structural rigidity. This thicker material allows for greater sealing. ThThe greater the structural rigidity, the less flexing when tightening and more uniform pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "defined compression"like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all hard 316 stainless steel hardware supplied with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant, nickel-chrome-plated stainless steel screws for added security and a bit of style!

Commitment to quality
We stand behind our commitment by offering a 10-year warranty years on all new Gen3s. NavPods.

The pod is used to mount the radar or chart plotter and instrument to the helmet. Navigation at your fingertips. "Where it's needed...when it's needednecessary". -Pods are smart...

Frequently asked questions (FAQ) about the NavPod GP2080-17 SystemPod Pre-Cut f/Simrad NSS9 evo3/B&G Zeus3 9 & 2 instruments (Simrad IS42/B&G Triton2/AP44 Square Hole) f/12" Wide Guard Who is the NavPod?
How to describe the NavPod GP2080-17 SystemPod Pre-Cut f/Simrad NSS9 evo3 /B&G Zeus3 9 & 2 instruments (Simrad IS42/B&G Triton2/AP44 Square Hole) f/12" Wide Guard?
Is it cut or uncut?
How to mount or what is the mounting style of the NavPod GP2080-17 SystemPod Pre -Cut f/Simrad NSS9 evo3/B&G Zeus3 9 & 2 Instruments (Simrad IS42/B&G Triton2/AP44 Square Hole) f/12" Wide Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods includeWaterproof silicone seal, tamper-proof fasteners for added security and convenience, concealed wiring and clean installation for easy access. How to describe NavPod GP2080-17 SystemPod Pre-Cut f/Simrad NSS9 evo3/B&G Zeus3 9 & 2 Instruments (Square Hole Simrad IS42/B&G Triton2/AP44) Wide Guard f/12"? The pod is used to mount radar or the chartplotter and instrument on the helmet. Navigationigation at your fingertips. "Where it's needed...when it's needed". -The pods are smart...Is it muted or not muted. CutHow to mount or what is the mounting style of NavPod GP2080-17 SystemPod Pre-Cut f/Simrad NSS9 evo3/B&G Zeus3 9 & 2 Instruments (Simrad IS42/B&G Triton2/AP44 Square Hole) f /12" wide guard? Pedestal

Save $125 when you purchase the NavPod GP2080-17 Pre-Cut SystemPod for Simrad NSS9 evo3/B&G Zeus3 9 and 2 instruments (Simrad IS42/B&G Triton2 /AP44 Square Hole) f/12" Wide Guard for only $404 from NVN Marine! Same day dispatch before 3 p.m. NavPod GP2080-17 Pre-Cut SystemPod for Simrad NSS9 evo3/B&G Zeus3 9 and 2 Instruments (Simrad IS42/B&G Triton2/AP44 Square Hole) f/12" Wide Guard Technical Specifications

Type:	Boat Equipment \| Display Mounts
Supplier:	NavPod
Cut/Uncut:	Cut
Mounting Style:	Stand

NavPod GP2080-17 Pre-Cut SystemPod f/Simrad NSS9 evo3/ B&G Instruments Zeus3 9 and 2 (Simrad IS42/B&G Triton2/AP44 Square Hole) f/12" Wide Guard User ReviewsNavPod GP2080-17 SystemPod pre-cut for Simrad NSS9 evo3/B&G Zeus3 9 and 2 instruments (Simrad IS42/B&G Triton2/AP44 Square Hole) f/12" Wide Guard Shipping & Return

For detailed shipping policy, please see our shipping policydition and you can find our returns and refund policy here.