NavPod GP2500-33 Pre-Cut SystemPod for Raymarine AXIOM 7 and 1 Instrument f/12" Wide Guard *Requires Raymarine Front Mount Kit #A80498 for AXIOM 7 and Right Angle with NMEA 2000 Connector) - Pre-Cut for Front Mount Boat Outfitting

GP2500-33 SystemPod pre-cut for Raymarine AXIOM 7 and 1 instrument for 12" wide protection * Requires Raymarine front mounting kit #A80498 for AXIOM 7 and right angle with NMEA 2000 connector) - Pre-cut for l 'front Mount

SystemPods allow you to mount radar or chart plotter and instruments together at the helm "Where you need it…when you need it." . to mount your radar or chart plotter and instruments together on the bar where you can easily operate and clearly see the fine details of the screen.

It is best to mount a SystemPod on an AngleGuard to unique curvature.

p> Structural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for a tight seal. the larger, the greater the structural rigidityt good, less bending when tightening and more uniform. pressure on the joint. The excellent UV resistance. The ability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The joint will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench to bet Better holding ability when tightening than the screws used on our Traditional Series NavPod. For NavPods Gen3, we provide tamper-proof nickel-chrome-plated stainless steel screws for added security combined with a little style!

Commitment to quality
We stand behind our commitment by offering a 10 Year Warranty on all new NavPods Gen3.

Navigation at your fingertips. "Where it's needed…when it's needed." SystemPods is an intelligent solution that integrates radar or chartplotter and instruments.
PRODUCT ID: 76939
SKU: NVN-76939
CSKU: CWR-76939
REWRITE: 88050-navpod- gp2500-33-systempod -pre-cutpé-f-raymarine-axiom-7
MPN: GP2500-33
UPC: 659988114669
ASIN: B07R8V137C
WSKU: NAVGP250033
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod GP2500-33 Pre-Cut SystemPod for Raymarine AXIOM 7 & 1 Instrument f/12" Wide Guard *Requires Raymarine Front Mount Kit #A80498 for / AXIOM 7 & Angle straight with NMEA 2000 connector) - Pre-cut for front mounting
NAME_EX: NAVPOD GP2500-33 SYSTEMPOD PRE-CUT F/AXIOM 7 ET 1 INST.
PTITLE: NavPod GP2500-33 SystemPod Pre-Cut f/Raymarine AXIOM 7 & 1 Instrument f/12" Wide Guard *Requires Raymarine #A80498 Front Mount Kit for AXIOM 7 and Right Angle with NMEA 2000 Connector) - Pre-Cut for Front Mount
TYPE: Boat Equipment Display Mounts
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS
GPS or Navigation System

NavPod GP2500-33 Pre-Cut SystemPod for Raymarine AXIOM 7 1 Instrument f/12" Wide Guard *Requires Raymarine #A80498 Front Mount Kit for AXIOM 7 Right
GPS or Navigation System
Gtags:

GSpecs:

NavPod GP2500-33 SystemPod Pre-Cut for Raymarine AXIOM 7 and 1 Instrument f/12" Wide Guard *Requires Raymarine Front Mount Kit #A80498 for AXIOM 7 and Right Angle with NMEA 2000 Connector) - Pre-Cut for Front Product Description of

GP2500-33 SystemPod pre-cut support for Raymarine AXIOM 7 and 1 instrument for 12" wide protection *Requires Raymarine front mounting kit #A80498 for AXIOM 7 and right angle with NMEA 2000 connector) - Pre- Cut for front mounting

SystemPods allow radar or chartplotter and instruments to be mounted together on the helm. Navigation at your fingertips. "Where you need it…when you need it." SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.

It is best to set up a systemmPod on a single-curvature AngleGuard.

Structural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker external silicone sealis with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-proof nickel-chrome-plated stainless steel screws for added security combined with a little style!

Commitment to quality
We stand behind our commitment by offering a 10 year warranty on all new NavPods Gen3.

Navigation at your fingertips. "Where it's needed…when it's needed." SystemPods is a smart solution that integrates radar or chartplotter and instruments.

Frequently Asked Questions (FAQ) About NavPod GP2500-33 Pre-Cut SystemPod for Raymarine AXIOM 7 & 1 Instrument f/12" Wide Guard * Requires Raymarine # A80498 Front Mount Kit for AXIOM 7 and Up (Right Angle with NMEA 2000 Connector) - Pre-Cut for Front Mount Who is the NavPod? How to Describe the Pre-Cut NavPod GP2500-33 SystemPod for Raymarine AXIOM 7 & 1 Instrument f/ 12" Wide Guard *Requires Raymarine Front Mount Kit #A80498 for AXIOM 7 and Right Angle with NMEA 2000 Connector) - Pre-cut for Front Mount?
Is it cut or uncut?
How ride or what is it? the mounting style of the NavPod GP2500-33 SystemPod pre-cut for Raymarine AXIOM 7 and 1 instrument for protection12" wide * Requires Raymarine Front Mount Kit #A80498 for AXIOM 7 and Right Angle with NMEA 2000 Connector) - Pre-Cut for Front Mount?
What is the NavPod? Navpod is a better way to mount your sonar, radar or GPS The unique waterproof seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal,. Tamper-resistant fasteners for added security and convenience, concealed wiring and clEasy installation for easy access How to Describe the NavPod GP2500-33 SystemPod pre-cut for Raymarine AXIOM 7 and 1 instrument for 12" wide protection *Requires mounting kit. Raymarine front #A80498 for AXIOM 7 and right angle with NMEA 2000. Connector) - Pre-cut for front mounting? Navigation at your fingertips. "Where it's needed…when it's needed." SystemPodsis an intelligent solution that integrates radar or chartplotter and instruments. How to mount or what is the mounting style of the NavPod GP2500-33 Pre-Cut SystemPod for Raymarine AXIOM 7 & 1 f/12" Wide Guard Instrument *Requires Raymarine Front Mount Kit #A80498 for AXIOM 7 & 1 right angle with NMEA 2000 connector) - Pre-cut for front mounting ? Pedestal

Save $89 on the purchase of the NavPod GP2500-33 Pre-cut SystemPod for Raymarine AXIOM 7 & 1 Instrument f/12" Wide Guard *Requires Raymarine #A80498 Front Mount Kit for AXIOM 7 and Right Angle with NMEA 2000 Connector) - Pre-Cut/Front Mount for only $290 at NVN Marine! Same day dispatch before 3 p.m. NavPod GP2500-33 SystemPod pre-cut for Raymarine AXIOM 7 and 1 instrument f/12" Wide Guard * Requires Raymarine front mounting kit #A80498 for AXIOM 7 and right angle with NMEA 2000 connector) - Pre-cut for the frontSupport Technical Specifications

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cut
Edit Style:	Pedestal

NavPod GP2500 -33 pre-cut SystemPods for Raymarine AXIOM 7 and 1 f/12" Wide Guard instrument * Requires Raymarine front mounting kit # A80498 for AXIOM 7 and Right Angle with NMEA 2000 Connector) - Pre-Cut for Front Mount User AvisNavPod GP2500-33 SystemPod Pre-Cut f/Raymarine AXIOM 7 & 1 Instrument f/12&qpas; Raymarine #A80498 for AXIOM 7 and Right Angle with NMEA 2000 Connector) - Pre-Cut for Front Mount Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our policyreturns and refunds here.