NavPod GP2600-16 SystemPod pre-cut for Garmin GPSMAP 742xs 742 722xs 722 and 2 instruments (3.6 inch holes) for 12 inch wide protection Boat Outfitting

GP2600-16 Pre-cut SystemPod for Garmin GPSMAP 742xs, 742, 722xs, 722 and 2 instruments (3.6" holes) for 12" wide protection

SystemPods are for mounting radar or chart plotter and instruments together at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.

It is best to mount a SystemPod on a single-curvature AngleGuard.

Structural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less there ise flexion during tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The protective acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The seal will continue to do its jobwork.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For Gen3 NavPods, we provide tamper-proof nickel-plated stainless steel screws for added security and a bit of style!

Commitment to quality

NavPod backs its commitment by offering a 10-year warranty on all new NavPods Gen3.

SystemPod Model NAVGP260016: Used for Garmin GPSMAP 742xs / 742 / 722xs / 722 and pre-cut SystemPod GP2600-16 of 2 inches. (3.6 hole?) Used for the protective cover of 12" wide SystemPods, used to install radar or...: 92171-navpod-gp2600-16-systempod-pre-cut-f-garmin- gpsmap-742xs
MPN: GP2600-16
UPC:
ASIN:
WSKU: NAVGP260016
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod GP2600-16 Pre-cut SystemPod for Garmin GPSMAP 742xs, 742, 722xs, 722 and 2 instruments (3.6″ holes) f/12" Wide Guard
NAME_EX: NAVPOD SYSTEM POD PRE-CUT FOR GARMIN GPSMAP 742XS/742/722XS
PTITLE : NavPod GP2600-16 SystemPod Pre-Cut f/Garmin GPSMAP 742xs, 742, 722xs, 722 & 2 Instruments (3.6" Holes) f/12" Wide Guard
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

NavPod GP2600-16 SystemPod Pre-Cut f/Garmin GPSMAP 742xs, 742, 722xs, 722 and 2 instruments (3.6 ? Holes) f/12 Wide Guard - GP2600-16

Gtags:

GSpecs:

NavPod GP2600-16 Pre-Cut SystemPod for Garmin GPSMAP 742xs, 742, 722xs, 722 and 2 Instruments (3.6-inch holes) for 12-inch wide protection Product Description

GP2600-16 Pre-Cut SystemPod for Garmin GPSMAP 742xs, 742, 722xs, 722 and 2 instruments (3.6 inch holes) for 12 inch wide protection

SystemPods allow mounting of a radar or plotter maps and instruments together on the bar. Navigation at your fingertips… "Where you need it, when you need it. » SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.

It is best to mount a SystemPod on a single-curvature AngleGuard.

Structural Rigidity – Gen3 improvements now include thicker gauge acrylic coated ABS material thani improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The better the structural rigidity, the less flexibility when tightening and more uniform pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "defined compression" asmany rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large roet tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPod Gen3, we provide tamper-proof nickel-chrome-plated stainless steel screws for added security combined with a bit of style!

Commitment to quality

NavPod backs its commitment by offering a 10-year warranty on all new NavPods Gen3.

SystemPod Model NAVGP260016: used for Garmin GPSMAP 742xs / 742 / 722xs / 722 and pre-cut SystemPod GP2600- 16 by 2 inches. (3.6 ? Hole) Used forr the protective cover for 12-inch wide SystemPods, used to install radar or...

Frequently Asked Questions (FAQ) About NavPod GP2600 -16 pre-cut SystemPods f/Garmin GPSMAP 742xs, 742, 722xs, 722 and 2 instruments (3.6″ holes) f/12" Wide Guard Who is the NavPod?
How to describe the NavPod GP2600-16 SystemPod Pre-Cut for Garmin GPSMAP 742xs, 742, 722xs, 722 & 2 instruments (3.6″ holes) f/12" Wide Guard?
Is it cut or uncut?
How mount or what is the mounting style of the NavPod GP2600-16 SystemPod Pre-Cut f/Garmin GPSMAP 742xs, 742, 722xs, 722 and 2 instruments (3.6" holes) f/12" Wide Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS The unique waterproof seal, build quality and attractive design make the best-built instrument case ever available to the marine industry. The characteristics of alls Navpods include waterproof silicone seal, tamper-proof clips for security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod GP2600-16 SystemPod Pre-Cut f/Garmin GPSMAP 742xs, 742, 722xs, 722 & 2 instruments (3.6" holes) f/12" wide protection? SystemPod Model NAVGP260016: Used for Garmin GPSMAP 742xs / 742 / 722xs / 722 and pre-cut 2 inch SystemPod GP2600-16. (3.6? Hole) Used for 12 inch wide SystemPods protective cover, used to install radar or...Is it cut or uncut? Cut How to mount or what is the mounting style of the NavPod GP2600-16 SystemPod Pre-Cut f/Garmin GPSMAP 742xs, 742, 722xs, 722 and 2 instruments (3.6″ holes) f/ 12" Wide Guard? Pedestal

Save $110 when you purchase the NavPod GP2600-16 Pre-Cut SystemPod for Garmin GPSMAP 742xs, 742, 722xs, 722 and 2 instruments (3.6″ Holes) f/12" Wide Guardfor only $359 from NVN Marine! Same day dispatch before 3 p.m. NavPod GP2600-16 SystemPod pre-cut for Garmin GPSMAP 742xs, 742, 722xs, 722 and 2 instruments (3.6 inch holes) for 12 inch wide protection Technical specifications

Type:	Boat fitting out \| Display Media
Supplier:	NavPod
Mounting Style:	Base
Cut/Uncut:	Cut

Pre-cut NavPod GP2600-16 SystemPod for Garmin GPSMAP 742xs, 742, 722xs, 722 and 2 instruments (3.6 inch holes) f/12" Wide Guard User ReviewsNavPod GP2600-16 SystemPod pre-cut for Garmin GPSMAP 742xs, 742, 722xs, 722 and 2 instruments (3.6" holes) f/12" Wide Guard Shipping & Returns

For one detailed shipping policy, please view our shipping policy and you canfind our return and refund policy here.