NAVPOD GP2920-10 SailPod for Simrad NSO evo2 Marine Navigation & Instruments

NAVGP292010 SailPod

Model: GP2920-10

Pre-cut SailPod for Simrad NSO evo2 NSO evo3 16? / B&G Zeus Zeus 16 glass helmet? (MO16P-MO16T-ZM16T) for 12? corner protection

SailPods are intended for mounting a single radar or chartplotter at the helm. Navigation at your fingertips. "Where do you need it? When you need it." Sail Pods are the smart solution for mounting your radar or chartplotter to the helm where you can easily operate it and clearly see small details on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Nickel-chrome plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. It is preferable to mount aSailPod on a single-bend AngleGuard or use a double-bend AngleGuard to install an InstrumentPod on the top vertical section and a SailPod below on the corners.

Structural rigidity — Gen3 improvements include now a thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal — All SailPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SailPods soundt designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poran Microcell polyurethane seal is now 50% thicker and is not subject to "compression" like many rubber products. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant nickel-chrome-plated stainless steel screws for added security and a bit of stylethe!

Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.

NAVPOD GP2920-10 SailPod for Simrad NSO evo2 Product Description

NAVGP292010 SailPod

Model: GP2920-10

Pre-cut SailPod for Simrad NSO evo2 ONS evo3 16? / B&G Zeus Zeus 16 glass helmet? (MO16P-MO16T-ZM16T) for 12? corner protection

SailPods are intended for mounting a single radar or chartplotter at the helm. Navigation at your fingertips. "Where do you need it? When you need it." Sail Pods are the smart solution for mounting your radar or chartplotter to the helm where you can easily operate it and clearly see small details on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Nickel-chrome plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double-sealed waterproof seal, NavPods protect your electronic devices from harsh boating conditions.most difficult and wet shores. It is best to mount a SailPod on a single curvature AngleGuard or use a double curvature AngleGuard to mount an InstrumentPod on the top vertical section and SailPod below on the inclined section.

Stiffness Structural — Gen3 enhancements now include thicker gauge acrylic-coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal — All SailPods are manufactured with a double seal system providing an excellent seal. This joint offersBetter protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poran Microcell polyurethane seal is now 50% thicker and is not subject to "retentive compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-proof screwsmade from nickel-chrome-plated stainless steel for added safety and a bit of style!

Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.

Save $336 when you purchase the NAVPOD GP2920-10 SailPod for Simrad NSO evo2 for only $203 NVN Marine! Same day dispatch before 3 p.m. NAVPOD GP2920-10 SailPod for Simrad NSO evo2 Technical Specificationsns

Type:	Marine Navigation & Instruments \| Instruments
Supplier:	NavPod

NAVPOD GP2920-10 SailPod for Simrad NSO evo2 User ReviewsNAVPOD GP2920-10 SailPod for Simrad NSO evo2 Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our policy returns and refunds here.