NavPod PowerPod with Pre-Cut RAM Holder for Lowrance HDS-7 Gen2 Touch HDS-7 Gen3 and HDS Carbon 7 - Carbon Black Boat Outfitting

PowerPod with Pre-Cut RAM Stand for Lowrance HDS-7 Gen2 Touch, HDS-7 Gen3 and HDS Carbon 7 - Carbon Black

The Pod Pedestal with RAM Stands is specially designed for mount the depth sounder near the bow of Bass Boats. Built on the popular NavPods line of waterproof cases for marine electronics, PedestalPods position your fishfinder/chartplotter within an easy-access distance of 20 inches from the deck. This allows the user to easily access the screen to change the range, zoom or even control the trolling motor. There is a big difference between reaching down to a height of 20" from the deck to control your fishfinder and reaching up to the deck when only mounted on a stand.

PedestalPods are made with A Double Seal System which provides excellent waterproofing This offers protection to your fishfinder/chartplotter against humid navigation conditions.of the most difficult. This protection ensures the reliability and longevity of your marine electronics.

The PedestalPod with RAM Mounts uses the proven RAM mounting system with the large 2.25" "D" size rubber ball and solution security RAM Pin-Lock. RAM mounts are designed with a patented rubber ball and socket system that allows a nearly infinite number of ways to position the fishfinder angle for that precise viewing position.

When towing or storing boat, the screen can fold flat on the deck with only 10" of clearance. This will allow most boat covers to fit the PedestalPod when not in use.

Your fishfinder mounts easily flush into the pre-cut face of the NavPod. There are pre-cut models available for 7", 9" and 12" LCDs from all major marine electronics manufacturers.

PedestalPods – Protection, convenience, security.

The PowerPod with RAM Base combines the looks and waterproof protection of the NavPod with the installation flexibility of the RAM Base. PowerPods are manufactured with a double seal system that provides excellent sealing to protect your fish finder or chartplotter from the harshest wet environments on the boat. The protection function can ensure the reliability and service life of your marine electronic equipment. Part of the PowerPod RAM series, the mature RAM installation system uses a large 2.25" rubber "D" ball, two cable manager base platforms, a RAM-D-201U-C arm and a Pin-Lock safety button. Unique stainless steel NavPods steel protection Altered fasteners, including Torq key RAM holder adopts patented rubber ball and socket system design, almost countless ways to position; the angle of the detectorfish or chart plotter to obtain an adjustable and precise position. Combined with RAM Pin-Lock security system allows you. to safely place your electronic equipment on the vessel. It can be installed at any surface angle and protect electronic equipment in all directions. The production lines of two very dedicated companies ensure the election of your ship.electronic equipment Install solution.
PRODUCT ID: 69372
SKU: NVN-69372
CSKU: CWR-69372
REWRITE: 80483-navpod-powerpod-w-ram-mount-pre-cut-f-lowrance-hds- 7
MPN: PPRS4403-C
UPC: 659988115765
ASIN: B07TZ57V86
WSKU: NAVPPRS4403C
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PowerPod with Pre-Cut RAM Mount for Lowrance HDS-7 Gen2 Touch, HDS-7 Gen3 and HDS Carbon 7 - Carbon Black
NAME_EX: NAVPOD POWER POD WITH PRE-CUT RAM MOUNT FOR LOWRANCE
PTITLE : NavPodPowerPod with Pre-Cut RAM Holder for Lowrance HDS-7 Gen2 Touch, HDS-7 Gen3 and HDS Carbon 7 - Carbon Black
TYPE: Boat Equipment | Display Mounts
SUPPLIER: NavPod
ELECTRONICS> MARINE ELECTRONICS
GPS or Navigation System

NavPod PowerPod with Pre-Cut RAM Holderf/ Lowrance HDS-7 Gen2 Touch, HDS-7 Gen3 HDS Carbon 7 - Carbon Black
GPS or navigation system
Gtags:

GSpecs:

NavPod PowerPod with Pre-Cut RAM Holder for Lowrance HDS-7 Gen2 Touch, HDS-7 Gen3 and HDS Carbon 7 - Carbon Black Product Description

PowerPod with Pre-Cut RAM Holder for Lowrance HDS-7 Gen2 Touch, HDS-7 Gen3 and HDS Carbon 7 - Carbon Black

The PedestalPod with RAM mounts is specially designed to mount the fishfinder near the bow of Bass Boats. Built on the popular NavPods line of waterproof cases for marine electronics, PedestalPods position your fishfinder/chartplotter within an easy-access distance of 20 inches from the deck. This allows the user to easily access the screen to change the range, zoom or even control the trolling motor. There is a big difference between reaching down to a height of 20" from the deck to control your fishfinder and reaching up to the deck when only mounted on a stand.

PedestalPods are made with a double joi systemnt which offers excellent sealing. This provides protection for your fishfinder/chartplotter in the harshest wet boating conditions. This protection ensures the reliability and longevity of your marine electronics.

The PedestalPod with RAM Mounts uses the proven RAM mounting system with the large 2.25 inch "D" size rubber ball and the RAM Pin-Lock security solution. RAM mounts are designed with a patented rubber ball and socket system that allows a nearly infinite number of ways to position the fishfinder angle for that precise viewing position.

When towing or storing boat, the screen can fold flat on the deck with only 10" of clearance. This will allow most boat covers to fit the PedestalPod when not in use.

Your fishfinder mounts easily flush into the pre-cut face of the NavPod There are mods.Pre-cut panels available for 7", 9" and 12" LCD displays from all major marine electronics manufacturers.

PedestalPods – Protection, convenience, security.

PowerPod Combo with RAM Base combines the look and waterproof protection of the NavPod with the installation flexibility of the RAM Base. PowerPods are manufactured with a double seal system, which provides excellent waterproofing to protect your fish finder or plotter. maps the harshest wet environments on the boat The protection function can ensure the reliability and service life of your marine electronic equipment. Part of the PowerPod RAM series, the mature RAM installation system uses a large rubber ball. 2.25" "D", two cable manager base platforms, RAM-D-201U-C arm and Pin-Lock safety button. NavPods unique stainless steel protection Weathered fasteners including Torq wrench; the supRAM port adopts patented rubber ball and socket system design, almost countless ways to position the angle of the fish finder or chartplotter to achieve an adjustable and precise position. Combined with RAM Pin-Lock security system allows you. to safely place your electronic equipment on the vessel. It can be installed at any surface angle.d protect electronic equipment in all directions. The production lines of two very dedicated companies supply the electronic equipment for your vessel. Install the solution.

Frequently Asked Questions (FAQ) about NavPod PowerPod with Pre-Cut RAM Holder for Lowrance HDS-7 Gen2 Touch, HDS-7 Gen3 and HDS Carbon 7 - Carbon Black Who is the NavPod? How to describe the NavPod PowerPod with Pre-Cut RAM Holder for Lowrance HDS-7 Gen2 Touch, HDS-7 Gen3 and HDS Carbon 7 - Carbon Black?
Is it cut or uncut?
How to mount or what is the mounting style of the NavPod PowerPod with pre-cut RAM holder f/Lowrance HDS-7 Gen2 Touch, HDS-7 Gen3 and HDS Carbon 7 – Carbon Black?
What is the product control interface?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, build quality and attractive design make the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PowerPod with Pre-Cut RAM Holder for Lowrance HDS-7 Gen2 Touch, HDS-7 Gen3 and HDS Carbon 7 - Carbon Black? The PowerPod with RAM Base combines the look and waterproof protection of the NavPod with the flexibility of installationlation of the RAM base. PowerPods are manufactured with a double seal system, which provides an excellent seal to protect your fish finder or chartplotter from the harshest wet environments on the boat. The protection function can ensure the reliability and service life of your marine electronic equipment. Part of the PowerPod RAM series, the mature RAM installation system uses a large 2.25" rubber "D" ball, two cable manager base platforms, a RAM-D-201U-C arm and a Pin-Lock security button. Unique stainless steel protection of the NavPod Altered fasteners, including for rq key. RAM holder adopts patented rubber ball and socket system design, almost countless ways to position the angle of the fish finder or chartplotter to achieve an adjustable and precise position Combined with RAM Pin-Lock safety system allows you to me.Safely transport your electronic equipment on the vessel. It can be installed at any surface angle and protect electronic equipment in all directions. The production lines of two very dedicated companies ensure the electronic equipment of your ship. Install the solution. Is it cut or uncut? Cut How to mount or what is the mounting style of the NavPod PowerPod with Pre-Cut RAM Holder for Lowrance HDS-7 Gen2 Touch, HDS-7 Gen3 and HDS Carbon 7 - Carbon Black? DashWhat is the product control interface? SATA 6.0 Gb/s

Save $145 when you purchase the NavPod PowerPod with Pre-Cut RAM Holder for Lowrance HDS-7 Gen2 Touch, HDS-7 Gen3 and HDS Carbon 7 - Carbon Blackfor only $454 at NVN Marine! Same shipping possible before 3 p.m. NavPod PowerPod with Pre-Cut RAM Holder for Lowrance HDS-7 Gen2 Touch, HDS-7 Gen3 and HDS Carbon 7 - Carbon Black Specificationtechnical tions

Type:	Boat outfitter \| Display Media
Supplier:	NavPod
Edit Style:	Dash
Cut/Uncut:	Cut

NavPod PowerPod with Pre-Cut RAM Holder for Lowrance HDS-7 Gen2 Touch, HDS-7 Gen3 and HDS Carbon 7 - Carbon Black User ReviewsNavPod PowerPod with Pre-Cut RAM Holder for Lowrance HDS-7 Gen2 Touch, HDS-7 Gen3 and HDS Carbon 7 - Carbon Black Shipping & Return

For detailed shipping policy, please see our shipping policy and you will find our returns and Refunds Policy here.