NavPod PP4409 Pre-Cut PowerPod f/Garmin STRIKER 7" 7sv/7dv (requires part Garmin flush mount kit) Boat Outfitting

PP4409 Pre-Cut PowerPod for Garmin STRIKER™ 7sv/7dv 7" CHIRP Fishfinder (requires flush mount kit, Garmin part)

PP4400 series, PowerPods for power are a better option as the stand PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion stand that comes with most PowerPods does not have the benefit of protecting the The back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. also expect you to mount it flush-mounted in the console or in a NavPod protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

Sail PowerPods are intended to be mounted on a flat surface, perhaps under the cubbyhole or at the back of the tablefrom the cockpit, especially on twin-wheel boats. .

All powerPods include:

ABS plastic with acrylic cap
Tamper-proof chrome-plated stainless steel closures
br>
Double seal for waterproof integrity
Models are available pre-cut for popular electronic devices
Swivel base with large passage for cable harness

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest industry...
PRODUCT ID: 63913
SKU: NVN-63913
CSKU: CWR-63913
REWRITE: 75024-navpod-pp4409-powerpod-pre-cut-f-garmin- striker-7
MPN: PP4409
UPC: 659988111699
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4409 Pre-cut PowerPod forGarmin STRIKER™ 7" 7sv/7dv (requires flush mount kit, Garmin part)
EX_NAME: PRE-CUT NAVPOD POWERPOD FOR GARMIN STRIKER 7SV/7DV 7 INCHES
PTITLE: NavPod PP4409 Pre-Cut PowerPod for Garmin STRIKER™ 7" 7sv/7dv (requires flush mount kit, Garmin part)
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod PP4409 PowerPod Pre-Cut f/Garmin STRIKER 7" 7sv/ 7dv (requires flush mount kit, Garmin part)

Gtags:

GSpecs:

NavPod PP4409 Pre-Cut PowerPod for Garmin STRIKER™ 7" 7sv/7dv (Requires Flush Mount Kit, Garmin Part) Product Description PP4409 Pre-Cut PowerPod for Garmin STRIKER™ 7sv/7dv 7" CHIRP Fishfinder (Requires Flush Mount Kit Garmin Part)

PP4400 Series, PowerPods for Power are a better option than stand mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects connectors and wires en plastic from deterioration caused by prolonged UV exposure.

PowerPods for Sail are intended to be mounted on a flat surface. Perhaps under the cubby or aft of the cockpit table, especially on twin wheel boats.

All PowerPods include:

Acrylic capped ABS plastic
Chrome-plated stainless steel tamper-resistant fasteners
Double seal for waterproof integrity
Templates are available pre-cut for popular electronic devices
br>
Swivel base with large wiring harness pass-through

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest technology in the industry...

NavPod PP4409 Pre-cut PowerPod for Garmin STRIKER™ 7" 7sv/7dv (requires flush mount kit, Garmin part) Related ProductsGarmin flush mount kit for STRIKER™ 7dv/7sv

Frequently Asked Questions (FAQ) About NavPod PP4409 Pre-Cut PowerPod for Garmin STRIKER™ 7" 7sv/7dv (Requires Flush Mount Kit (Garmin Part) Who is the NavPod? How to Describe NavPod PP4409 Pre-Cut PowerPod f/Garmin STRIKER™ 7 " 7sv/7dv (requires flush mount kit, Garmin part)?
Is it cut? or uncut?
How to mount or what is the mounting style of NavPod PP4409 PowerPod precut f/Garmin STRIKER™ 7" 7sv/7dv (requires Garmin part flush mount kit)?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, quality build and attractive design make the best-built instrument case ever available to the marine industry Features of all Navpods incl.Features waterproof silicone gasket, tamper-resistant clips for added security and convenience, concealed wiring and clean installation for easy access. How to Describe NavPod PP4409 Pre-Cut PowerPod f/Garmin STRIKER™ 7" 7sv/7dv (Requires Flush Mount Kit Garmin Part) Compared to rack installation, PowerPods for Power are a better choice. You get the advantage of a rotating base, which can provide a clean appearance for built-in installation The latest industry... Is it cut or uncut How to mount or what is the mounting style of the NavPod. PP4409 Pre-Cut PowerPod f/Garmin STRIKER™ 7" 7sv/7dv (requires flush mount kit, Garmin part)? Dash

Save $82 when you purchase the NavPod PP4409 Pre-Cut PowerPod for Garmin STRIKER™ 7" 7sv/7dv (requires flush mount kit, Garmin part )for only $287 from NVN Marine Same day shipping before 1!5am. NavPod PP4409 Pre-Cut PowerPod f/Garmin STRIKER™ 7" 7sv/7dv (Requires Part Garmin Flush Mount Kit) Technical Specifications

Type:	Boat Equipment \| Display Stands
Seller:	NavPod
Cut/Uncut:	Cutted
Editing Style:	Dash

NavPod PP4409 Pre-Cut PowerPod for Garmin STRIKER™ 7" 7sv/7dv (Requires Garmin Part Flush Mount Kit) Reviews UsersNavPod PP4409 Pre-Cut PowerPod f/Garmin STRIKER™ 7" 7sv/7dv (Requires Garmin Part Flush Mount Kit) Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our Return Policy and Refund Policy here.