Sale!

NavPod PP4811 Pre-Cut PowerPod for Garmin GPSMAP 8008 and 8208 - Carbon Black

$82

SKU: NavPod PP4811 Pre-Cut PowerPod for Garmin GPSMAP 8008 and 8208 - Carbon Black
Category:

NavPod PP4811 Pre-Cut PowerPod for Garmin GPSMAP 8008 and 8208 - Carbon Black Boat Outfitting

Pre-cut PowerPod PP4811 for Garmin GPSMAP 8008 and 8208 - Carbon Black


PP4800 series, PowerPods for power supply are a better option than bracket mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by long-term UV exposure.

PowerPods for Sail are intended to be mounted on a flat surface. Maybeou the dodger or behind the cockpit table, especially on twin wheel boats.

All PowerPods include:

  • Acrylic-coated ABS plastic
  • Chrome-plated stainless steel tamper-resistant fasteners
  • Double seal for waterproof integrity
  • Models are available pre-cut for popular electronics
  • Swivel base with large passage for cable harness

High gloss material

The waterproof seal

All NavPods are manufactured with a double seal system offeringt excellent sealing between the front and back of the NavPod to protect your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws

We We use all stainless steel mounting hardware provided with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3, we provide Nickel-Chrome Plated Stainless Steel Tamper Proof Screws for pmore safety combined with a little bling!

The manufacturing process

Large caliber thermoforming is considered an art since Many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible marine waterproof case. Electronic. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will honor our commitment by now offering a 10-year warrantyon all new NavPods Gen3.



Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.
PRODUCT ID: 63944
SKU: NVN-63944
CSKU: CWR-63944
REWRITE: 75055-navpod-pp4811-powerpod-pre-cut-f-garmin-gpsmap-8008
MPN: PP4811-C
UPC: 659988112436
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME : NavPod PP4811 Pre-Cut PowerPod for Garmin GPSMAP 8008 and 8208 - Carbon Black
NOM_EX: NAVPOD PRE-CUT POWERPOD FOR GARMIN 8008/8208
PTITLE: NavPod PP4811 Pre-Cut PowerPod for Garmin GPSMAP 8008 and 8208 - Carbon Black
TYPE: Boat fittings | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NAVPOD Pp4811 powerpodpre-cut f/garmin 8008/8208 - carbon black

Gtags:

GSpecs:

NavPod PP4811 Pre-Cut PowerPod for Garmin GPSMAP 8008 and 8208 - Carbon Black Product Description

PP4811 Pre-Cut PowerPod for Garmin GPSMAP 8008 and 8208 - Carbon Black


PP4800 Series, PowerPods for power are a better option than rack mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by long-term exposure.g term to UV.

The PowerPods for Sail are intended to be mounted on a flat surface. Perhaps under the dodger or aft of the cockpit table, especially on twin wheel boats.

All PowerPods include:

  • ABS plastic with acrylic cap
  • Chrome-plated stainless steel tamper-resistant fasteners
  • Double seal for waterproof integrity
  • The Models are available pre-cut for popular electronic devices
  • Swivel base with large passage for wiring harness

High gloss material

NavPods are made with a custom co-extruded material ABS material coated with acrylic. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides bettertheir structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and the back of the NavPod for protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws

We We use all stainless steel mounting hardware provided with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod key for greater hand holdabilityhold when tightening as the previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large caliber thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have an experienced in-house design engineer who uses CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will enjoy years of trouble-free service anda shiny, durable finish. We will honor our commitment by now offering a 10-year warranty on all new NavPods Gen3.



Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.

Frequently Asked Questions (FAQ) about NavPod PP4811 Pre-Cut PowerPod for Garmin GPSMAP 8008 and 8208 - Carbon Black Who is NavPod?
How to describe the NavPod PP4811 PowerPod Pre-Cutf/Garmin GPSMAP 8008 & 8208 - Carbon Black?
Is it cut or uncut?
How to mount or what is the mounting style of the NavPod PP4811 PowerPod pre-cut f/Garmin GPSMAP 8008 & 8208 - Carbon Black?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, build quality and attractive design makeof the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP4811 PowerPod Pre-Cut f/Garmin GPSMAP 8008 & 8208 - Carbon Black? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a clean appearance for built-in installation. Is it cut or uncut? CutHow to mount or what is the mounting style of NavPod PP4811 Pre-Cut PowerPod f/Garmin GPSMAP 8008 & 8208 - Carbon Black? Dash

Save $108 when you purchase the NavPod PP4811 Pre-Cut PowerPod for Garmin GPSMAP 8008 and 8208 - Carbon Black for only $381from NVN Marine! Same day shippingeven before 3 p.m. NavPod PP4811 Pre-Cut PowerPod for Garmin GPSMAP 8008 and 8208 - Carbon Black Technical Specifications
Type:

Boat Equipment | Display Media

Supplier:

NavPod

Cut/Uncut:

Cutted

Edit Style:

Dash

NavPod PP4811 Pre-Cut PowerPod for Garmin GPSMAP 8008 and 8208 - Carbon Black User ReviewsNavPod PP4811 Pre-Cut PowerPod for Garmin GPSMAP 8008 and 8208 - Shipping and Return Carbon Black

For detailed shipping policy please see our shipping policy and you can find our return and refund policy here.