NavPod PP5200 Uncut PowerPod (Usable Face = 15.18"L x 9.85"H) (39.6cm W x 24.9cm H) - Carbon Black Boat Outfitting

Uncut PowerPod PP5200 (Usable Face = 15.18" Width x 9.85" Height) (39.6 cm Width x 24.9 cm Height) - Carbon Black

PowerPods are designed for serious boaters who cruise offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

The PowerPods for Sail are intended to be mounted on a flat surface Perhaps under the cubby or aft end.re of the cockpit table, especially on twin wheel boats.

Structural Rigidity

Gen3 improvements now include a thicker gauge acrylic coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially harmful effects on plastic. These NavPods are really strong!

Waterproof seal

All NavPods are made with a double seal system providing an excellent seal between the front and back of the NavPod. This seal offers the best protection for your marine electronics. NavPods are designed to withstand the cmost difficult and wet offshore navigation conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel

The NavPod uses all 316 stainless steel hardware provided with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-proof nickel-chrome-plated stainless steel screws for added security combined with a little bling!

Commitment to quality

We are committed to producing high quality waterproof enclosures for marine electronics. We stand behind our commitment by offering a 10-year warranty on all new NavPod Gen3s. We want you to be a NavPod customer for life and are ready to earn your trust and loyalty.

The sail-pod is used to mount a single radar or chartplotter on the helmet. Navigation at your fingertips. "In case of need...in case of need." Sail Pods are the smartest people...
PRODUCT ID: 63976
SKU: NVN-63976
CSKU: CWR-63976
REWRITE: 75087-navpod-pp5200-powerpod-uncut-usable -face
MPN: PP5200-C
UPC: 659988112733
ASIN: B082B7K5KY
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP5200 Uncut PowerPod (Usable Face = 15.18" L x 9.85" H) (39.6 cm W x 24.9 cm H) - Carbon Black
NAME_EX: NAVPOD POWUNCUT ERPOD (USABLE FACE = 15.18"L .6 cm W x 9.8 cm H) - Carbon Black
TYPE: Boat Equipment | Display Mounts
SUPPLIER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod SailPod GP1064 for 9.5" Wide Guard

Tags:

Boat
Automotive

GSpecs :

NavPod PP5200 PowerPod Uncut (Usable Face = 15.18" L x 9.85" H) (39.6 cm W x 24.9 cm H) - Carbon Black Product Description

PP5200 PowerPod Uncut cut (usable face = 15.18" W x 9.85" H) (39.6 cm wide x 24.9 cm high) - Carbon Black

PowerPods are designed for serious boaters who go offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

ThePowerPods for Sail are intended to be mounted on a flat surface. Perhaps under the cubbyhole or aft end of the cockpit table particularly on twin wheel boats.

StructuralRigidity

Gen3 improvements now include thicker gauge acrylic-coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially harmful effects on plastic. These NavPods are really strong!

Waterproof seal

All NavPods are made with a double seal system providing an excellent seal between the front and back of the NavPod. This jOinted offers the best protection for your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poran Microcell polyurethane seal is now 50% thicker and is not subject to "retentive compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel

The NavPod uses all 316 stainless steel hardware provided with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we fourWe offer nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

Commitment to quality

The sail-The pod is used to mount a single radar or chartplotter on the helmet . Navigation at your fingertips. "In case of need...in case of need." Sail Pods are the smartest people...

Frequently asked questions (FAQ) about the NavPod PP5200 Uncut PowerPod (usable face = 15.18 " width x 9.85" height) (39.6 cm wide x 24.9 cm high) - Carbon Black Who is the NavPod?
How to describe the NavPod PP5200 PowerPod not coupé (usable face = 15.18" wide x 9.85" high) (15.6" wide x 9.75" high) - Carbon Black?
Is it cut or uncut ?
How to mount or what is the mounting style of the Uncut NavPod PP5200 PowerPod (Usable Face = 15.18" W x 9.85" H) (39.6 cm W x 24.9 cm H) - Carbon Black?
How big is the usable surface area of the product?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring, and clean installation for easy access. How to describe the Uncut NavPod PP5200 PowerPod (Usable Face = 15.18" L x 9.85" H) (39.6 cm W x 24.9 cm H) - Carbon Black? THEsail-pod is used to mount a single radar or chartplotter on the helmet. Navigation at your fingertips. "In case of need...in case of need." Sail Pods are the smartest people... Is this cut or not? Uncut How to mount or what is the mounting style of the Uncut NavPod PP5200 PowerPod (usable face = 15.18" width x 9.85" height) (39.6 cm width x 9.8" tall) - Carbon Black? DashWhat is the size of the usable surface area of the product? 15.18"L x 9.85"H

Save $115 when you purchase the NavPod PP5200 Uncut PowerPod (Usable Face = 15.18"L x 9.85"H) (39.6cm W x 24.9cm H) - Carbon Blackfor only $404 at NVN Marine! Same day dispatch before 3 p.m. NavPod PP5200 Uncut PowerPod (Usable Face = 15.18"L x 9.85"H) (39.6cm W x 24.9cm H) - Carbon Black Technical Specifications

Type:	Bay Outfitterwater \| Display Media
Supplier:	NavPod
Cut/Uncut:	Uncut
Edit Style:	Pulled
Usable side:	15.18"W x 9.85"H

NavPod PP5200 Uncut PowerPod (usable face = 15.18" W x 9.85" H) (39.6 cm W x 24.9 cm H) - Carbon Black User ReviewsNavPod PP5200 Uncut PowerPod (Usable Face = 15.18" W x 9.85" H) (15.6" W x 9.8" H) - Carbon Black Shipping & Returns

For detailed shipping policy, please see our shipping policy and you can find our return and refund policy here.