NavPod PP5213 Pre-Cut PowerPod for Raymarine GS125 - Carbon Black Boat Outfitting

PP5213 Pre-Cut PowerPod for Raymarine GS125 - Carbon Black

PowerPods are designed for serious offshore boaters. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

PowerPods for Sail are intended to be mounted on a flat surface Perhaps under the cubbyhole or aft end of the cockpit table, particularly on twin wheel boats.

High gloss material

NavPods are made with a custom co-extruded ABS material with acrylic cap. We use the best UV resistant material.a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The tight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "defined compression" like many compoundsof rubber. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPoClé d for better holding capacity when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used pto interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will honor our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.
PRODUCT ID: 63983
SKU: NVN-63983
CSKU: CWR-63983
REWRITE: 75094-navpod-pp5213-powerpod-pre-cut-f-raymarine-gs125
MPN: PP5213-C
UPC: 659988112818
ASIN: B082B9M6Z7
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP5213 Pre-Cut PowerPod for Raymarine GS125 - Carbon Black
NAME_EX: NAVPOD PRE-CUT POWERPOD FOR RAYMARINE GS125 (CARBON BLACK)
PTITLE: NavPod PP5213 Pre-Cut PowerPod for Raymarine GS125 - Carbon Black
TYPE: Boat fittings | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NAVPOD Powerpod pre-cut f/raymarine gs125 - carbon black

Gtags:

GSpecs:

NavPod PP5213 Pre-Cut PowerPod for Raymarine GS125 - Carbon Black Product Description

PP5213 Pre-Cut PowerPod for Raymarine GS125 - Carbon Black

PowerPods are designed for serious boaters who sail offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

The PowerPods for Sail are intended to be mounted on a flat surface Perhaps under the storage room.u the aft end of the cockpit table, especially on twin wheel boats.

The high gloss material

NavPods are made with a custom co-extruded acrylic capped ABS material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The tight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is defunctrbut 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of tooling. We are fortunate to have experienced in-house design engineers.tees that use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we're confident you'll enjoy years of trouble-free service and long-lasting shine. That's it. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.

Frequently asked questions (FAQ) about the NavPod PP5213 PowPre-Cut erPod for Raymarine GS125 - Carbon Black Who is the NavPod?
How to describe it NavPod PP5213 Pre-Cut PowerPod for Raymarine GS125 - Carbon Black?
Is it cut or uncut?
How to assemble or what is the mounting style of the NavPod PP5213 Pre-Cut PowerPod for Raymarine GS125 - Carbon Black?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof sili cone seal, tamper-resistant fasteners for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP5213 PowerPod Pre-Cut f/Raymarine GS125 - Carbon Black? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the availabilityntage of having a rotating base, which can provide a clean appearance for built-in installation. Is it cut or uncut? Cut How to mount or what is the mounting style of the NavPod PP5213 PowerPod Pre-Cut f/Raymarine GS125 - Carbon Black? Dash

Save $119 when you purchase the NavPod PP5213 Pre-Cut PowerPod for Raymarine GS125 - Carbon Black for only $420 b> b> from NVN Marine! Same day dispatch before 3 p.m. NavPod PP5213 Pre-Cut PowerPod f/Raymarine GS125 - Carbon Black Technical Specifications

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cut
Edit Style:	Dash

NavPod PP5213 Pre-Cut PowerPod for Raymarine GS125 - Carbon Black User ReviewsNavPod PP5213 Pre-Cut PowerPodfor Raymarine GS125 - Carbon Black Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our return & refund policy here.