Newmar 2-3-70 Battery Isolator Bestsellers
2-3-70 Battery Isolator
This heavy-duty isolator allows multiple batteries to be automatically charged from one or two alternators and prevents discharge or "dumping » of a battery. in another. Each battery is charged as needed without overcharging and is designed for 12, 24 or 36 volt negative ground DC systems.
Features:
- Conservative quality diodes and rust-proof anodized aluminum heatsink housing.
- Rugged construction
- Rated for systems up to 48V DC, negative ground
- Rust-resistant anodized aluminum housing
- Stainless steel mounting hardware is provided
- Protective covers are provided for the terminals
Specifications:
- Alternator sources: 2
- Battery bank: 3
- Max. Amperage Input Capacity: 70
- G-Terminal Sizestud: 6 mm
- Dimensions (L x W x H): 6.5 x 4.5 x 3.1 inches
- Weight: 4 lbs.
- Operating Temperature: -40 to +80 degrees
- Duty Cycle: Continuous rating up to 50 degrees C. Linear derating to 70% at 80 degrees C.
- Temp. Rise: 5 degrees C at full current rating (vertical mounting for optimal cooling)
- Voltage drop: 0.7V at 50% load, 0.9V at full load
*Note:These battery isolators are not compatible with self-exciting alternators. The alternator must have an external excitation wire. Please consult your alternator manufacturer if you are unsure of your configuration
This product cannot be returned to the original point of purchase. Please contact the manufacturer directly with any problems or concerns.PRODUCT ID: 102299
SKU: NVN-102299
CSKU: CWR-102299
REWRITE : 113410 -newmar-2-3-70-battery-isolator
MPN: 2-3-70
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NEWMAR 2-3-70 BATTERY ISOLATOR
NAME_EX:
PTITLE: Newmar 2-3-70 Battery Isolator
TYPE: Electric | Battery Isolators
SELLER: Newmar Power
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Gtags:
GSpecs:
Newmar 2-3-70 Battery Isolator Product Description
2-3-70 Battery Isolator
This heavy-duty isolator allows multiple batteries to be automatically charged from one or two alternators and prevents the discharge or "spill" of one battery into another. Each battery is charged as needed without overcharging and is designed for 12, 24 or 36 volt negative ground DC systems.
Features:
- Conservative quality diodes and rust-proof anodized aluminum heatsink housing.
- Rugged construction
- Rated for systems up to 48V DC, negative ground
- Rust-resistant anodized aluminum housing
- Stainless steel mounting hardware is provided
- Protective covers are provided for the terminals
Specifications:
- Alternator sources: 2
- Battery bank: 3
- Max. CAmperage Input Capacity: 70
- Stud Terminal Size: 6mm
- Dimensions (L x W x H): 6.5 x 4.5 x 3 .1 inch
- Weight: 4 lbs
- Operating temperature: -40 to +80 degrees
- Duty cycle: Continuous temperature rating up to 50 degrees C Linear derating to 70% @ 80 degrees C.
- Temp. Rise: 5 degrees C at full current rating (vertical mounting for optimal cooling)
- Voltage drop: 0.7V at 50% load, 0.9V at full load
*Note:These battery isolators are not compatible with self-exciting alternators. The alternator must have an external excitation wire. Please consult your alternator manufacturer if you are unsure of your configuration
This product cannot be returned to the original point of purchase. Please contact the manufacturer directly if you have any problems or concerns.Savez $80 when you purchase the Newmar 2-3- 70 Battery Isolator for only $229 from NVN Marine! Same day dispatch before 3 p.m. Newmar 2-3-70 Battery Isolator Technical Specifications
| Type: | Electric | Battery Isolators |
|---|---|
| Supplier: | Newmar Power |
