Newmar 32-12-15 DC Converter Bestsellers
32-12-15 DC Converter
Convert 20-50 VDC input to 12 VDC negative ground output to power communications and navigation equipment on negative mass systems. (See isolated series for positive ground applications.)
Features:
- Excellent regulation: output voltage maintained at 1% under all lines and charges. rated conditions
- Heat generated by the semiconductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and long component life
- li>
- Conformal polyurethane coating on PC boards and corrosion-resistant anodized aluminum cases with rugged shock-mounts ensure survival in hostile environments
De numerous converter and ch protection circuitsarge:
- Current limitation
- Automatic thermal shutdown
- Short circuit resistant
- Reversal of polarity
- Overvoltage protection
- Carries CE marking
Specifications:
- Input voltage: 20-50
- Output voltage: 13.6
- Output amps (intermittent): 15
- Output amplifiers (continuous): 15
- Case size (H x W x D): 4.5 x 5.9 x 11.0 inches (11.4 x 15.0 x 27.9 centimeters)
- Weight: 2.3 kg (5 lb)
- Output: 13.6 VDC (internally adjustable from 12.6 to 14.5) or 24.5 VDC (or specify)
- Ripple: 150 mV P-P maximum
- Regulation: 1% line/load
- Switching frequency: 40 kHz
- Efficiency : 85% – Typical.
- Isolation: Output /Chassis; Input/Chassis: 250 VDC
Duty Cycle Ratings*:
- Intermittent: 20 minutes of maximum operation, 20 % service. current limit set at approx. 105% of intermittent rate.
- Continuous: 24 hours, 100% service *24-12-3: 2 minutes max. on time
- Standing current: less than 100 mA (including power indicator "ON")
Operating temperature specifications:
- 0-50 degrees C, linear derating from 100% at 40 degrees C to 50% at 50 degrees C.
- Thermal shutdown at 70 degrees C Temperature housing
- Model 24-12-3: Full outlet -25 degrees to +30 degrees C; Linear derating from 100% at +30 degrees C to 45% at +50 degrees C
Mechanical specifications:
- Powder -Coated aluminum heatsink enclosure
- Front panel terminal block
- Heavy duty mounting flange
- Compliant coated PC board
Options:
- Operation as battery charger or redundant parallel operation* – derating to continuous service (contact factory)
- Mounting with extreme vibration kit. (Information below)
Option: Extreme Vibration Mounting Kit
Extreme Vibration Mounting Kit is available to protect NEWMAR power converters for extreme conditions. shock and vibration stresses when fitted to high vibration vehicles. The kit replaces the standard vibration kit supplied with the unit and fits into the unit's bracket flange to act as a "super shock absorber" for electronics in high vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT L for units weighing 2 to 15 lbs. and Kit H for units weighing between 16 and 7 lbs.
This product cannot be returned to the original point of purchase. Please contact the manufacturer directly if you have any problems or concerns.upation.PRODUCT ID: 102303
SKU: NVN-102303
CSKU: CWR-102303
REWRITE: 113414 -newmar-32-12-15- dc-converter
MPN: 32-12-15
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NEWMAR DC CONVERTER 32-12-15
NAME_EX:
PTITLE: Newmar DC Converter 32-12-15
TYPE: Electric | DC to DC Converters
SELLER: Newmar Power
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Gtags:
GSpecs:
Newmar 32-12-15 DC Converter Product Description
32-12-15 DC Converter
Convert 20-50 VDC input to 12 VDC negative ground output to power communications and navigation equipment on negative ground systems. (See isolated series for positive ground applications.)
Features:
- Excellent regulation: output voltage maintained at 1% under all lines and charges. rated conditions
- Heat generated by the semiconductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and long component life
- li>
- Conformal polyurethane coating on PC boards and corrosion-resistant anodized aluminum cases with rugged shock-mounts ensure survival in hostile environments
De many cConverter and load protection circuits:
- Current limiting
- Automatic thermal shutdown
- Short circuit resistant
- li>
- Reverse polarity
- Overvoltage protection
- Carries CE marking
Specifications:
- Input voltage: 20-50
- Output voltage: 13.6
- Output amps (intermittent): 15
- Output amps (continuous): 15
- Case size (H x W x D): 4.5 x 5.9 x 11.0 inches (11.4 x 15.0 x 27 .9 centimeters)
- Weight: 5 lb (2.3 kg)
- Output: 13.6 V DC (internally adjustable 12.6 - 14.5) or 24. 5 VDC (or specify)
- Ripple: 150 mV P-P maximum
- Regulation: 1% line/load
- Switching frequency: 40 kHz
- Efficiency: 85% – Typical.
- Isolation: Output/Chassis; Input/Chassis: 250 VDC
Duty Cycle Ratings*:
- Intermittent: 20 minutes ofmaximum operation, 20% duty . current limit set at approx. 105% of intermittent rate.
- Continuous: 24 hours, 100% service *24-12-3: 2 minutes max. on time
- Standing current: less than 100 mA (including power indicator "ON")
Operating temperature specifications:
- 0-50°C, linear derating from 100% at 40°C to 50% at 50°C.
- Thermal shutdown at one case temperature 70°C
- Model 24-12-3: Full outlet -25 degrees to +30 degrees C; Linear derating from 100% at +30 degrees C to 45% at +50 degrees C
Mechanical specifications:
- Powder -Coated aluminum heatsink enclosure
- Front panel terminal block
- Heavy duty mounting flange
- Compliant coated PC board
Options:
- Operation as battery charger or redundant operation in parallelallele* – downgrade to continuous service (contact factory)
- Mounting with extreme vibration kit. (Information below)
Option: Extreme Vibration Mounting Kit
Extreme Vibration Mounting Kit is available to protect NEWMAR power converters for extreme conditions. shock and vibration stresses when fitted to high vibration vehicles. The kit replaces the standard vibration kit supplied with the unit and fits into the unit's mounting flange to act as a "super shock absorber" for the electronics in high vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT L for units weighing 2 to 15 lbs. and Kit H for units weighing between 16 and 7 lbs.
This product cannot be returned to the original point of purchase. Please contact the manufacturer directly if you have any problems or problems.e concern.Save $170 when you purchase the Newmar 32-12- 15 DC for only $479 from NVN Marine! Same day dispatch before 3 p.m. Newmar 32-12-15 DC Converter Technical Specifications
Type: | Electric | DC to DC Converters |
---|---|
Supplier: | Newmar Power |
For detailed shipping policy, please view our shipping policy and you can find our return and refund policy here.
- Newmar 32-12-10 DC-DC Converter 20-50VDC to 13.6 Vdc @ 10A
- Newmar 32-12-10 DC Converter
- Newmar 30 A single pole circuit breaker with black jet
- Newmar 30 A double pole circuit breaker with black jet
- Newmar 25 A single pole circuit breaker with black jet
- Newmar 24-12-3 DC Converter
- Newmar 20 A single pole circuit breaker with black jet