Newmar PT80 12v 80AMP Charger Input 115/230V Electrical
Phase Three Series 80A Battery ChargerThe "smart" charger for almost any applicationPhase Three's "Smart" battery charging technology lets you select the size, features and flexibility you need for virtually any applications from small pleasure craft to large pleasure boats. on board, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-stage charging process that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life. A selector switch adjusts the output voltage to accommodate gel cell/flooded lead acid/AGM battery types. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All modsThey are housed in a rugged stainless steel housing with a choice of natural or durable white powder-coated finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.
NewMar PT80 Attributes- Number of Banks: 1
- Application: AGM/Flooded/Gel Batteries
- Output Voltage: 12 Volts
- Input Voltage: 90 at 264 volts
- Rated current: 80 charging amps
- Universality: completely universal
- Length (IN): 14.8 inches
- Width (IN): 9.6 inches
- Height (IN): 5.6 inches
- Intelligent circuitry enables three-stage charging: bulk, absorption, float.
- Multiple isolated output banks; Ammeter indicates total output current.
- Optional sensor adjusts output voltage based on battery temperature.
- LiCurrent mitation - prevents damage from overcharging.
- Charger status is clearly displayed with optional LED, ammeter or remote panel.
- Use as a power supply; can power loads without an in-line battery.
- Drip guard and optional marinized internal circuits.
- Numerous safety and EMC compliance standards
- Guaranteed two years on parts and labor.nty
Three stage "smart" chargers
Stage three "smart" battery charging technology is now available in a wide range of power levels, allowing you to select the right size. , features and flexibility you need for virtually any application, from small pleasure craft to large cruise ships, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the processOptimal three-stage charging system that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life.
A selector switch adjusts the output voltage to suit the gel-cell/flooded lead-acid/AGM battery types. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and internal circuitry is polyurethane coated for maximum corrosion resistance.
Features
-
The "smart" circuit allows charging in three stages: bulk, absorption, floating.
-
A wide range of models covers power levels Battery system rating from 14 to 950 amp hours
-
The switch typeGel cell/Flooded lead acid/AGM battery pack selects optimal charge/float voltages.
-
Multiple isolated output banks; The ammeter indicates the total output current. (except PT-7)
-
Optional sensor adjusts output voltage based on battery temperature. (except PT-7)
-
Current limitation to prevent damage due to overload.
-
The status of the charger is clearly displayed with an LED. and/or optional audible indicators or remote panel.
-
Use as power supply; can power loads without a battery online.
-
Built to last? Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry.
-
Extensive safety and EMC complianceDouble years of parts and labor warranty
Templates
| 12 Volts | 24 Volts | 32 Volts |
| PT -7 | PT-24-8W | PT-32 -25W |
| PT-14W | PT-24-13W | |
| PT-25W | PT-24-20U | |
| PT-40U | PT-24-45U | |
| PT-80 | " nowrap> PT-24-60W | |
| PT-24-95U | ||
| Detailed specifications below. | ||
Specifications
| 12 volt models | PT-7 | PT-14W | PT-25W | PT-40W | PT-80 |
| VAC input (50-60 Hz.) | 88-132 or | 85-264 | 90-132 or | 85-135 or | 90-264 |
| Full Load Input Amps | |||||
| @ 115 VAC | 2 | 2.8 | 6.5 | 8.5 | 12 |
| @ 230 VAC | 1 | 1.4 | 4 | 4.3 | 7 |
| Note P.F. | >.65 | .93@230V | .7 | .7 | .95@230V |
| Maximum output amplifiers | 7 | 14 | 25 | 40 | 80 |
| Output banks | 2 | 3 | 3 | 3 | 3 |
| Battery capacity (amp-hours) | 14- 70 | 28-140 | 50-250 | 80-400 | 160-800 |
| Temp. of operation. | T-1 | T -2 | T-4 | T-5 | T- 7 |
| Ref. Housing size. | A-1 | A-2 | A-2 | A-3 | A-5 |
| Weight; Lbs./Kg. | 3.2/1.5 | 8/4 | 8.2/4 | 12/6 | 15.2/7 |
| Optional temperature. Model of sensor | N/A | TCS-12/24 | TCS-12/24 | TCS-12/24 | TCS-12/24 |
| Remote panel template | N/A | RP | RP | RP | RP |
| Equalizer option | No | Yes | Yes | Yes | Yes |
| Ref. output indicator | M-1 | M-3 | M-3 | M- 3 | M-3 |
| Compliance Ref. | CG, CE | CG, CE | CG | CG, CE | CE |
p>
| 24 volt models | PT-24-8W | PT- 24-13W | PT-24-20U | PT-24- 45U | PT-24-60W | PT-24-95U |
| VAC input (50-60 Hz.) | 85-264 | 90-132 or | 85-135 or | 90-264 | 207-253 | 90-264 |
| Full Load Input Amps | ||||||
| @ 115 VAC | 2.8 | 6.5 | 8.5 | 12 | NA | 26 |
| @ 230 VAC | 1.4 | 4 | 4.3 | 7 | 13 | 14 |
| P.F. Note | .93@230V | .7 | .7 | .95@230V | .7 | .95@230V |
| Maximum Output Amps | 8 | 13 | 20 | 45 | 60 | 95 |
| Output banks | 3 | 3 | 3 | 3 | 3 | 3 |
| Battery capacity (amp-hours) | 16-80 | 26-130 | 40-200 | 90-450 | 120-600 | 180-950 |
| Temp. of operation. | T-2 | T-3 | T-5 | T-8 | T-6 | T-8 |
| Ref. Housing size. | A-2 | A-2 | A-3 | A-5 | A-6 | A- 6 |
| Weight; Lbs./Kg. | 8/4 | 8.2/ 4 | 12/6 | 12.2/6 | 24.1/11 | 24.5/11 |
| Modeloptional temperature sensor | TCS-12/24 | TCS -12/24 | TCS-12/24 | TCS-12 /24 | TP | TCS-12/24 |
| Remote panel template | RP | RP | RP | RP | N/A | RP |
| Equalizer option | Yes | Yes | Yes | Yes | No | Yes |
| Ref. output indicator | M-3 | M-3 | M-3 | M-3 | M-2 | M-3 |
| Conformity Ref. | CG, CE | CG | CG, CE | EN, CE | EN, CE | EN, CE |
| 32 volt model | PT-32-25W |
| VAC input (50-60 Hz.) | 104-126 |
| Full load input currents | |
| @115 VAC | 15 |
| @ 230 VAC | N/A |
| P.F. Note | .7 |
| Maximum output Amps | 25 |
| Output Banks | 3 |
| Battery Capacity (amps -hours) | 50-250 |
| Temp. of operation. | T-6 |
| Ref. case size | A-4 |
| Weight; Lbs./Kg. | 12.2/6 |
| Optional temperature sensor model | TP |
| Remote panel template | N/A |
| Eg optionalization | No |
| Ref. output indicator. | M-2 |
| Conformity Ref. | EN, CE |
Case Size
| Inches | Centimeters | |||||
| Ref | H | W | D | H | W | D |
| A-1 | 10.5 | 5.0 | 2.8 | 26.7 | 12.7 | 7.1 |
| A-2 | 12.5 | 7.7 | 4.3 | 31.8 | 19.6 | 10.9 |
| A-3 | 13.85 * | 9.5 | 4.8* | 35.2* | 24.1 | 12.2* |
| A-4 | 13.8A | 9.8 | 5A | 35A | 24.9 | 12.7A |
| A-5 | 14.8B | 9.6 | 5.6B | 37,6B | 24.4 | 14.2B |
| A-6 | 17.5C | 12 | 7.2C | 44.5C | 30.5 | 18.3C |
| * Add 0.75" (1.9 cm) to the height and 1.35" ( 3.4 cm) to the depth | ||||||
Temperature Evaluation references:
| T-1 | -10°C to +45°C; linear derating from 100% at 0°C to 80% at -10°C |
| T- 2 | -10°C to +60°C;re from 100% at 40°C to 60% at 60°C |
| T-3 | -10°C to +60°C 100% linear derating at 50°C to 60; % @ 60°C |
| T-4 | -10°C to +60 °C; Linear derating from 100% at 40°C to 60% at 60°C |
| T-5 | -40°C to +60°C; Linear derating from 100% at 50°C to 75% at 60°C |
| T-6 | -20°C to +50°C; Full output |
| T-7 | -20°C to +70°C; Linear derating from 100% at 45°C to 50% at 70°C |
| T-8 | -20°C to +70°C; Linear derating from 100% at 50°C to 50% at 70°C |
Output Indicator References
| M-1 | Total output ammeter |
| M-2 | Charge/L.E.D. Float |
| M-3 | Total output ammeter and charger status LEDs/alarms |
Conformity references*
See matrix for applicable models
CG USCG CFR 183.410 (Protected against ignition)
EN EN 60335-1, EN 60335-2 -29
CE marked CE
* Many other safety and EMC compliances may also apply. Contact factory for additional compliance
iInformation is required.
Rated output voltages at freeze/flood switch settings
(Without temperature compensation option installed or at 22.2 °C (72 °F) with the temperature compensation option
installed.)
| | 24 Volt models | 32 Volt model | ||||
| Load | Float | Load | Float | Load | Float | |
| Parameter | @ 50% load | @ 0.5 amp load | @ 50% load | @ 0.5 amp load | @ 50% load | @ 0.5 amp load |
| Gel-Cell | 14.0 VDC | 13, 6 VDC | 28.0 VDC | 27.2 VDC | 37.3 VDC | 36.2 VDC |
| Flooded/AGM | 14.2 VDC | 13.4 VDC | 28.4 VDC | 26.8 VDC | 37.8 VDC | 35.7 VDC |
Now the third stage's "smart" battery charging technology can be used at different power levels, allowing you to choose the right size, function and flexibility you need. need...
PRODUCT ID: 1001200
SKU: NVN-1001200
CSKU: CWR-1001200
REWRITE: 1012311-newmar-pt80-12v-80amp-charger- 115-230 V input
MPN: PT80
UPC:
ASIN: B002HSHNVM
WSKU: NEWPT80
SSKU:
KSKU: NMRPT80
GSKU:
MSKU:
LSKU:
NAME: Newmar PT80 12v 80AMP Charger 115/230V Input
NAME_EX:
PTITLE: Newmar PT80 12v 80AMP Charger 115/230V Input
TYPE: Electric | Battery Chargers
SELLER: NewMar
Photography
Newmar Pt80 Newmar Pt80 Charger 12 V 80 A Input 115/230 V
Photography
Gtags:
GSpecs:
Newmar PT80 12V 80A Charger 115/230V Input Product Description
80A Phase Three Battery Charger SeriesThe "smart" charger for almost any applicationPhase three "smart" battery charging technology lets you select the right size, features and flexibility you need for virtually any application, from small pleasure craft to large cruise ships, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-stage charging process that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life. A selector switch adjusts the output voltage to accommodate gel cell/flooded lead acid/AGM battery types. An optional temperature compensation sensor also adjusts the output for ideal voltage in function of ambient temperature changes of the batteries. All models are housed in a rugged stainless steel housing with a choice of natural or durable white powder-coated finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.
NewMar PT80 Attributes- Number of banks: 1
- Application: AGM/Flooded/Gel Batteries
- Output Voltage:12 Volt
- Operating Voltage input: 90 to 264 volts
- Ampere rating: 80 A load
- Universality: Fully universal
- Length (IN): 14.8 inches
- Width (IN): 9.6 inches
- Height (IN): 5.6 inches
- Intelligent circuits allow three-stage charging: bulk, absorption, float.
- Multiple isolated output banks; Ammeter indicates total output current.
- Optional sensor adjusts output voltage based on battery temperature.
- Current limiting - prevents overload damage .
- Charger status is clearly displayed with an optional LED, ammeter or remote panel.
- Use as a power supply; can power loads without an in-line battery.
- Drip guard and optional marinized internal circuits.
- Numerous safety and EMC compliance standards
- Guaranteed two years parts and labor
Three-stage "smart" chargers
Stage three "smart" battery charging technology is now widely available range of power levels, allowing you to select the size ands appropriate features. and the flexibility you need for virtually any application, from small pleasure craft to large cruise ships, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-stage charging process that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life.
A selector adjusts output voltage to accommodate gel-cell/flooded lead-acid/AGM battery types. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.rosion.
Features
-
The "smart" circuit allows charging in three stages: bulk, absorption, floating.
-
A wide range of models covers battery system ratings from 14 to 950 amp-hours
-
The gel/lead cell battery type switch -acid flooded/AGM selects optimal charge/float voltages.
-
Multiple isolated output banks; The ammeter indicates the total output current. (except PT-7)
-
Optional sensor adjusts output voltage based on battery temperature. (except PT-7)
-
Current limitation to prevent damage due to overload.
-
The status of the charger is clearly displayed with an LED. and/or optional audible indicators or remote control panel.
-
Use as power supply; can power loads without a battery online.
-
Built to last? Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry.
-
Extensive safety and ECE compliance two years parts and labor
Models
| 12 Volts | 24 Volts | 32 Volts |
| PT-7 | PT-24-8W | PT-32-25W |
| PT- 14W | PT-24-13W | |
| PT-25W | PT-24-20U | |
| PT-40U | PT-24-45U | |
| PT-80 | PT-24-60W | |
| PT-24-95U | ||
| Detailed specifications below. | ||
Specifications
| 12 volt models | PT- 7 | PT-14W | PT-25W | PT-40W | PT-80 |
| VAC input (50-60 Hz.) | 88-132 or | 85-264 | 90-132 or | 85-135 or | 90-264 |
| Intensities 'full load input | |||||
| @ 115 VCA | 2 | 2.8 | 6.5 | 8.5 | 12 |
| @ 230 VAC | 1 | 1.4 | 4 | 4.3 | 7 |
| P.F. Note | >.65 | .93@230V | .7 | .7 | .95@230V |
| Maximum Output Amps | 7 | 14 | 25 | 40 | 80 |
| Output banks | 2 | 3 | 3 | 3 | 3 |
| Battery capacity (amp-hours) | 14-70 | 28-140 | 50-250 | 80-400 | 160-800 |
| Temp. of operation. | T-1 | T -2 | T-4 | T-5 | T-7 |
| Ref. Housing size. | A-1 | A-2 | A-2 | A-3 | A-5 |
| Weight; /Kg. | 3.2/1.5 | 8/ 4 | 8.2/4 | 12/6 | 15.2/7 |
| Optional temperature sensor model | N/A | TCS-12/24 | TCS-12/24 | TCS-12/24 | TCS-12/24 |
| Remote Panel Model | N/A | RP | RP | RP | RP |
| Equalizer option | No | Yes | |||
