OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Light - Ultra White Lighting

Pro Series Their exceptionally low profile head offers virtually unlimited hull mounting options, including retrofitting into most existing underwater light hole cutouts, providing the immediate benefits of no startup surge, low heat, minimal maintenance and improved light output.

With 7,000 lumens of brightness, the 2010XFM HD Gen2 is 67%
brighter than its predecessor by exploiting the new generation of high definition LEDs from Cree.

Suitable for all types of hull. up to 65' (20 m) and more using 2 to 6 lights with
3 to 5' (1 to 1.5 m) spacing - for metal hulls add the sleeve accessory Delrin insulation
. Deut quick connectorssch plug-and-play make this light a quick fit. Maintenance is easy; simply wipe marine growth from its scratch-resistant Tritonium glass lens. Three super bright LED colors options.

For even brighter light, choose 3010XFM HD Gen2. For a light with a smaller hole cutout, better suited to transom mounting applications, choose 2010TH. For a light with color changing capabilities, choose from our color models.

12/24V DC (AC upgrade available)
40,000+ hour lifespan
Tritonium Protection against marine growth
Plug & Play
Aluminum Bronze AB2
Factory Sealed
Protected against reverse polarity

Recommendations mounting:
Boat size:up to 65' (20M)
Transom spacing:3-5' (1.0-1.5M)
Sleeper Quantity: 2-6
Hull Spacing: 3-6 ft (1.0-1.5M) .8 M)
Installation depth (to top of fixture): 8 to 10" (200 to 250 mm)

Technical
Equivalent light output: 250W metal halide HID
Fixture lumens (total light output of a finished luminaire): 7,000
Current Consumption/Amp (DC) (AC upgrade available): 12 V DC 5.8 A / 24 V DC 2.9 A
Current Consumption/Amp (AC): 110 VAC 50/60 Hz 0.76 / 240 VAC 50/60 Hz 0.35 A

Pro Series XFM HD Gen2 models or Xchangeables built-in brackets cannot be swapped out when repairs are needed, without dragging Its extremely low head offers almost unlimited hull installation options, including modification of most existing underwater light holes, resulting in immediate benefits, namely. the absence of flowctuations of starting power, low heat generation, maintenance and improved light. The yield is low. Using Cree's next-generation high-definition LEDs, the 2010XFM HD Gen2 model has a brightness of 7,000 pixels, 67% more than its predecessor. Use 266 metal hull lights with an interval of 35 (), suitable for all hulls over 65 (20 m), and add Delrin insulation sleeve accessories. The Deutsch plug-and-play quick connector makes installing this light quick. Maintenance is easy, simply wipe the marine life off the scratch-resistant Tritonium glass lens. Three super bright LED color choices. For brighter light, please choose 3010XFM HD Gen2. For lamps with smaller openings, which are more suitable for backplate installation, please choose 2010TH.
PRODUCT ID: 49704
SKU: NVN-49704
CSKU: CWR-49704
REWRITE: 60815-oceanled-2010xfm-pro-series-hd-gen2-led
MPN: 001- 500744
UPC: 5051803005568
ASIN: B00EVIMY56
WSKU: OLE001500744
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Light - Ultra White
NOM_EX : OCEAN LED ULTRA WHITE 2010XFM HD GEN2 UNDERWATER LIGHT
TITLE: OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Light - Ultra White
TYPE: Lighting | Underwater Lighting
SELLER: OceanLED
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Automotive Parts & Accessories
Ocean LED Pro Series 2010XFM HD Gen2 br>Gtags:

Underwater

GSpecs :

OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Light - Ultra White Product Description Pro Series XFM HD Gen2

XFM models, or Xchangeable Flush Mounts, are just that - they are
exchangeable without transport if maintenance is necessary. Their exceptionally low profile head offers virtually unlimited hull mounting options, including retrofitting into most existing underwater light hole cutouts, providing the immediate benefits of no startup surge, low heat, minimal maintenance and improved light output.

With 7,000 lumens of brightness, the 2010XFM HD Gen2 is 67%
brighter than its predecessor by exploiting the new generation of high definition LEDs from Cree.

Suitable for all types of hull. up to 65' (20 m) and more using 2 to 6 lights with spacing of 3 to 5' (1 to 1.5 m) - for hullsFor metal applications, add the Delrin
insulation sleeve accessory. Deutsch plug-and-play quick connectors make this light a quick fit. Maintenance is easy; simply wipe me arine growth thanks to its scratch-resistant Tritonium glass lens. Three super bright LED color options.

For even brighter light, choose 3010XFM HD Gen2. For a light with a smaller hole cutout, better suited to transom mounting applications, choose 2010TH. For a light with color changing capabilities, choose from our color models.

12/24V DC (AC upgrade available)
40,000+ hour lifespan
Tritonium Protection against marine growth
Plug & Play
Aluminum Bronze AB2
Factory Sealed
Protected against reverse polarity

Recommendations of monage:
Boat size:up to 65' (20M)
Transom spacing:3-5' (1.0 -1.5M)
Quantity of transoms: 2-6
Hull spacing: 3 to 6 ft (1.0 to 1.8 M )
Installation depth (to top of fixture): 8 to 10" (200 to 250 mm)

Technical
Equivalent light output: 250W metal halide HID
Fixture lumens (total light output of a finite frame): 7,000
Current Consumption/Ampere (DC) (AC upgrade available): 12 VDC 5.8 A / 24 VDC 2.9 A
Current Consumption/Ampere (AC): 110VAC 50/60HZ 0.76 / 240VAC 50/60HZ 0.35A

Pro Series Extremely low profile offers almost unlimited hull installation options, including modification of most bolt holes.existing underwater lighting, resulting in immediate benefits of no start-up power fluctuations, low heat generation, low maintenance and improved light. The yield is low. Using Cree's next-generation high-definition LEDs, the 2010XFM HD Gen2 model has a brightness of 7,000 pixels, 67% more than its predecessor. Use 266 metal hull lights with an interval of 35 (), suitable for all hulls over 65 (20 m), and add Delrin insulation sleeve accessories. The Deutsch plug-and-play quick connector makes installing this light quick. Maintenance is easy, just wipe the marine life off the scratch-resistant Tritonium glass lens. Three super bright LED color options. For brighter light, please choose 3010XFM HD Gen2. For lamps with smaller openings, which are more suitable for mounting on the platerear, please choose 2010TH.

OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Light - Ultra White Related ProductsOceanLED Gen II 3010 HD Series Driver 12/24 VDC
OceanLED 4-Way Standard Junction Box
OceanLED Plug & Play Connection Cable - 6M
Sika Sikaflex 291 Fast Curing Adhesive and Sealant 10.3 oz (300 ml) Cartridge - White
Sika Sikaflex 291 Fast Curing Adhesive and Sealant 10.3 oz (300 ml) Cartridge - Black
Sika Sikaflex 291 LOT Slow Cure Adhesive and Sealant 10.3 oz (300 ml) Cartridge - White
Sika Sikaflex 291 LOT Adhesive and Slow Cure Sealant 10.3 oz (300 ml) Cartridge - Black
Sika Sikaflex 291 LOT Slow Cure Adhesive and Sealant 10.3 oz (300 ml) Cartridge - Black
Sika Sikaflex 291 LOT Slow 10.3 oz (300 ml) Curing Adhesive and Sealant Cartridge - Mahogany
Sika Sikaflex 221 Multi-Purpose Polyurethane Sealant/Adhesive - Cartouche 10.3 oz (300 ml) - White
Sika Sikaflex 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3 oz (300 ml) Cartridge - Black

Frequently Asked Questions (FAQ) about OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Lighting – Ultra White Who is OceanLED?
How to describe OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Lighting – Ultra White?
br/> What is the material of the OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Light – Ultra White?
What is the color of the OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Light – Ultra White? ?
How to mount or what is the mounting style of the OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Light - Ultra White?
Who is OceanLED? OceanLED is the leading manufacturer of the world's most widely distributed brand of underwater LED lighting. Specializing in the development and production of the highest quality marine LED lighting and accessories suitable for everyonestyles of boats, yachts and superyachts. OceanLED guarantees the selection of high quality LEDs, essential to the quality and consistency that OceanLED prides itself on and that the consumer expects. How to describe the OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Lighting – Ultra White? XFM HD Gen2 Pro Series models or Xchangeable integrated mounts can only be swapped out when repairs are needed, without hanging around. Its extremely low head provides almost unlimited hull installation options, including modification of most existing underwater light holes, resulting in immediate benefits of no start-up power fluctuations, low heat generation, maintenance and improved light. The yield is low. Using Cree's next-generation high-definition LEDs, the 2010XFM HD Gen2 model has a brightness of 7,000 pixels, 67% more than itspredecessor. Use a 266-light metal shell with an iInterval of 35 (), suitable for all shells over 65 (20m), and add Delrin insulation sleeve accessories. The Deutsch plug-and-play quick connector makes installing this light quick. Maintenance is easy, simply wipe the marine life off the scratch-resistant Tritonium glass lens. Three super bright LED color options. For brighter light, please choose 3010XFM HD Gen2. For lamps with smaller openings, which are more suitable for backplate installation, please choose 2010TH. What is the material of the OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Light - Ultra White? AB2 Aluminum Bronze

$2,709

OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Light - Ultra White

$2,089

Type:	Lighting \| Underwater lighting
Supplier:	OceanLED
Weight:	14.5 lbs
Mounting Style:	through the hull
Color:	White
Material:	AB2 Aluminum Bronze
User Guide:	Download PDF
Product brochure:	Tdownload PDF
Product installation:	Download PDF

Shipping Weight:	14.5 lbs
Box Sizes:	10.00 (h) x 11.00 (w) x 12.00 (w)
Cubic feet:	1320.0
Returnable:	Yes