Octopus 12" linear drive mounted on 38mm stroke 12V - up to 60' or 33000 lbs Marine Navigation & Instruments

Linear Actuators
OCTAF1212LAM12

An Octopus hydraulic linear actuator is a simple and effective way to drive the rudder on a boat equipped with a mechanical steering system. The linear actuator is an assembly of an Octopus reversing pump and a marine hydraulic cylinder. This assembly is mounted on the tiller or rudder quadrant. When the autopilot is not used, the ram rotates freely with the rudder. When the autopilot is used, a solenoid valve on the actuator closes and locks the cylinder. Steering signals from the pilot are now transmitted to the DC motor, which drives the pump to move the cylinder back and forth. When powered off, the solenoid valve immediately disconnects the autopilot from the rudder. The actuator has a small translucent oil reservoir, making it easy to check fluid levels. These actuators only have five piecess mobile. Mechanical simplicity gives our product reliability and ease of maintenance compared to complicated gear and screw actuators, making our units a favorite for offshore sailors. These actuators are shipped from our factory fully filled with oil and require no additional plumbing.

Features

Average current 4-6 amps

Maximum current: 19 amps

12 vDC

Cylinder bore: 38 mm

Variable flow: 600 cc- 1.2 liters/min

Stroke: 305 mm/12 in

Charging time (suggested): 14-16 sec

Max Rudder Torque: 1,200 Nm/10,600 lbs

Max Thrust: 400 Kg/882lbs

Octopus 12" Linear Drive Mounted on 38mm Stroke 12V - Up to 60' or 33,000 lb Product Description Linear Actuators
OCTAF1212LAM12

An Octopus hydraulic linear actuator is a simple and effective way to operate the rudder on a boat equipped with a mechanical steering system The linear actuator is an assembly of a. Octopus reversing pump and a marine hydraulic cylinder This assembly is mounted on the helm arm or rudder quadrant. The cylinder rotates freely with the rudder. When the autopilot is used, a solenoid valve on the actuator. closes and locks the ram Steering signals from the pilot are now transmitted to the DC motor, which drives the pump to reverse the ram. When powered off, the solenoid valve immediately disconnects the ram. Rudder autopilot The actuator has a small translucent oil reservoir, making it easy to control fluid levels.of. These actuators have only five moving parts. Improves our product reliability and ease of maintenance compared to complex gear and screw actuators, making our units preferred by offshore sailors. These actuators are shipped from our factory fully filled with oil and require no additional plumbing.

Features

Average current 4-6 amps

Maximum current: 19 amps

12 vDC

Cylinder bore: 38 mm

Variable flow: 600 cc- 1.2 liters/min

Stroke: 305 mm/12 in

Charging time (suggested): 14-16 sec

Max Rudder Torque: 1,200 Nm/10,600 lbs

Max Thrust: 400 Kg/882lbs

Length maximum boat speed: 18 m/60'

OCTAF1212LAM12 linear actuator. The Octopus hydraulic linear actuator is a simple and effective method of driving the rudder of a vessel equipped witha mechanical steering system. Linear actuator is a component of Octopus reversing pump and marine hydraulic cylinder. The component is installed on the tiller or quadrant. When the autopilot is not used, the hydraulic cylinder rotates freely with the rudder. When using the autopilot, the actuator solenoid valve closes and locks the cylinder. The steering signal from the pilot is now transmitted to the DC motor, which drives the pump to move the cylinder back and forth. After power failure, the solenoid valve immediately disconnects the automatic rudder control device. The actuator has a small translucent oil reservoir, making it easy to check the fluid level. These actuators have only five moving parts. Compared to complex gears and screw actuators, the simplicity of the machines makes our products reliable and easy to maintainenir. These actuators ship from our factory and are fully oil filled and require no additional piping. With an average current of 4 to 6 amps. Maximum current is 19 amps and 12V. DC bore: 38mm. Variable flow: 600cc. 1.2 L/min Stroke: 305 mm / 12". Recommended cure time: 14-16 seconds. Maximum Rudder Torque: 1,200 Nm / 10,600 lbs. Maximum Thrust: 400Kg / 882lbs. Maximum Vessel Length: 18 m / 60'.

Frequently asked questions (FAQ) on the Octopus 12" linear drive mounted on 38 mm stroke 12 V - up to 60' or 33,000 lb. Who is the Octopus Autopilot?
How to describe the Octopus 12" Stroke 38mm 12V Mounted Linear Drive - Up to 60' or 33,000 lbs?
What is the product type?
br/>Who is Octopus Autopilot Drives? Octopus is a division of Canada Metal (Pacific) Ltd. and has been designing, manufacturing and marketing autopilot drives since.over 20 years old. CMT manufactures and markets the Octopus range of marine autopilot drive systems. The synergies of the product lines as well as the expertise of their engineering and machining divisions allowed this acquisition to further strengthen our company's capabilities to meet the ever-growing needs of our customers. How to describe the Octopus 12" Linear Drive Mounted on 38mm Stroke 12V - Up To 60' or 33,000 lbs? OCTAF1212LAM12 Linear Actuator. The Octopus Hydraulic Linear Actuator is a simple and effective method of driving a ship's rudder Equipped with mechanical steering system. Linear actuator is a component of Octopus reversing pump and marine hydraulic cylinder. The component is installed on the tiller or quadrant. , the hydraulic cylinder rotates freely with the rudder When using the autopilot, the.actuator solenoid valve closes and locks the cylinder. The steering signal from the pilot is now transmitted to the DC motor, which drives the pump to move the cylinder back and forth. After power failure, the solenoid valve immediately disconnects the automatic rudder control device. The actuator has a small translucent oil reservoir, making it easy to check the fluid level. These actuators have only five moving parts. Compared with complex gears and lead screw actuators, the simplicity of machines makes our product reliable and easy to maintain. These actuators ship from our factory and are fully oil filled and require no additional piping. With an average current of 4 to 6 amps. Maximum current is 19 amps and 12V. DC bore: 38mm. Variable flow: 600cc. 1.2 L/min stroke: 305 mm / 12". Recommended curing time: 14-16 seconds. Maximum rudder torque: 1,200 Nm / 10,600 lbin. Maximum thrust: 400 Kg / 882 lbs. Maximum vessel length: 18 m / 60'.

The Octopus inverter pump is a high pressure, high flow, fully submersible pump that can be installed in any position.
The Octopus hydraulic linear actuator is designed to drive the rudder of a boat equipped with a mechanical system. steering system.

Simple and effective way to operate the rudder on a boat equipped with a mechanical steering system.
The linear actuator is an assembly of an Octopus reversing pump and marine hydraulic cylinder.
The linear actuator is activated by the reversing pump which pumps hydraulic fluid in sequence to each of the cylinder ports, causing the extension or retraction of the piston rod.

What is the product type? Pumps/Drives

The Octopu reversing pumps is a high pressure, high flow, fully submersible pump that can be installed in any position.
The Octopus hydraulic linear actuator is designed to drive the rudder on a boat equipped with a system mechanical steering system.
Simple and effective way to operate the rudder on a boat equipped with a mechanical steering system.
The linear actuator is an assembly of a pump Octopus reversing and a marine hydraulic cylinder.
The linear actuator is activated by the reversing pump which pumps hydraulic fluid in sequence to each of the cylinder ports, causing the extension or retraction of the piston rod.
This is a linear drive pump that has been designed for use with 12V DC power.
It has a 12" stroke , an average current of 4 to 6 amps and a maximum current of 19 amps.
The cylinder bore is 38 mm and it has a flow rate of600 cc at 1.2 liters/min
The loading time for this pump can be between 14 and 16 seconds depending on the setting chosen
The AF1212LAM12 is a water pump 12" bore linear drive with a 12 VDC motor.
This pump has an average current of 4 to 6 amps and a maximum current of 19 amps.
The Cylinder bore is 38 mm, variable flow is 600 cc-1.2 liter/min and stroke length is 305 mm/12 inch.
Restart time is 14 to 16 seconds, which means it takes 14 to 16 seconds for the pump to return to its starting position after being rotated.

Save 688 $ when you buy the Octopus 12" 12V Race Mounted 38mm Linear Drive - Up to 60' or 33,000 lbs for only $2009 at NVN Navy! Free same day delivery before 3 p.m. Octopus 12" linear drive mounted on 38 mm stroke 12 V - up to 60' or 33 000 lbs Technical Specifications

Type:	Navigation and Marine Instruments \| Autopilots
Supplier:	Octopus Autopilot Drives
Weight:	22.2 lbs
Type:	Pumps/Drives
User Guide:	Download PDF

Octopus 12" Linear Drive Mounted on 38mm Stroke 12V - Up to 60' or 33,000 lbs th>Shipping Weight:

22.2 lbs
Box sizes:	8.00 (h) x 8.00 (w) x 39.00 (l)
Cubic feet:	2496.0
Returnable:	Yes

For detailed shipping policy , please check our shipping policy and you can find our return policy and refund policy.here.